host/generic/statgrab.pl

#!/usr/bin/perl -w

#-----------------------------------------------------------------
# Machine statistics grabber
#     $Author: pjm2 $
#     $Id: statgrab.pl,v 1.16 2001/01/28 19:57:40 pjm2 Exp $
#
# A Perl script to return various information about a host machine
# by examining the output of some common Unix/Linux commands.
# This is a stopgap to act as a generic way of collecting the
# data.  It is perhaps more reliable than the current Java host
# at doing this and it can obviously be used by a C++ program as
# well until the C++ host is ready to find the information out
# itself.
#-----------------------------------------------------------------


$| = 1;


# You'd be silly not to use this ;)
use strict;

# Path's
my($topbin) = "/usr/local/sbin/top";
my($dfbin) = "/usr/bin/df";
my($usersbin) = "/usr/ucb/users";
my($unamebin) = "/usr/bin/uname";
my($uptimebin) = "/usr/bin/uptime";

# Run the following components: -
&print_ident();
&include_osver();
&include_uptime();
&include_users();
&include_top();
&include_disk();

# End the program normally.
exit(0);


# prints out an identifier for this version of statgrab.pl
# the host should check this when reading data
# means the host must be checked and updated to work with newer versions.
sub print_ident() {
    print 'version statgrab.pl $Revision: 1.16 $';
    print "\n";
}

# sub to print pairs of data, separated by a single space character.
# If the second argument is undefined, then the pair is still printed,
# however, the value shall be displayed as the string "unknown".
# If $type is non-zero, then "0" is printed instead of "unknown".
sub print_pair($$$) {
    my($type, $name, $value) = @_;

    if (!defined $value) {
        if ($type) {
            $value = "0.00";
        }
        else {
            $value = "unknown";
        }
    }

    # Remove the trailing linefeed if we've not already done so.
    chomp($value);

    # print the pair of data with a space inbetween.
    print "$name $value\n";
}


# sub to find out disk partition information, if it exists.
sub include_disk() {
    
    # Run the df program.
    my(@df) = `$dfbin -ak`;

    # Go through each line of the program, looking for each thing we want.
    my($partition_no) = 0;
    for (my($i) = 0; $i < $#df; $i++) {
        my($line) = $df[$i];
        $line =~ /^(\/[^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
        # $4 will not match unless everything before it does...
        if (defined $5) {
            my ($filesystem, $kbytes, $used, $avail, $mount) = ($1, $2, $3, $4, $5);
            &print_pair(0, "packet.disk.p$partition_no.attributes.name", $filesystem);
            &print_pair(1, "packet.disk.p$partition_no.attributes.kbytes", $kbytes);
            &print_pair(1, "packet.disk.p$partition_no.attributes.used", $used);
            &print_pair(1, "packet.disk.p$partition_no.attributes.avail", $avail);
            &print_pair(0, "packet.disk.p$partition_no.attributes.mount", $mount);
            ++$partition_no;
        }
    }
    
}

# sub to find out the list of all (non-unique) usernames logged
# in to the machine and how many their are. (not 
sub include_users() {

    # Find out all users on this machine.
    my($users) = `$usersbin`;
    $users = "\n" unless defined $users;
    chop $users;
    my($users_count) = 0;
    $users_count++ while $users =~ /\w+/g;
    my($users_list) = $users;

    &print_pair(1, "packet.users.count", $users_count);
    &print_pair(0, "packet.users.list", $users_list);
}


# sub to run a series of regexps on the output of 'top' to
# gather various machine statistics.
sub include_top() {

    # Find out some numbers from top.
    my(@top) = `$topbin -d2 -s1 0`;
    my($top) = join(" ", @top);
    $top =~ s/\n//g;

    &print_pair(1, "packet.load.load1", $top =~ /load averages:\s*([^\s]+?),/);
    &print_pair(1, "packet.load.load5", $top =~ /load averages:\s*.+?,\s*([^\s]+?),/);
    &print_pair(1, "packet.load.load15", $top =~ /load averages:\s*.+?,\s*.+?,\s*([^\s]+?)\s*/);
    &print_pair(1, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
    &print_pair(1, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
    &print_pair(1, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
    &print_pair(1, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
    &print_pair(1, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
    &print_pair(1, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
    &print_pair(1, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
    &print_pair(1, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
    &print_pair(1, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
    &print_pair(1, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);

    # The following need to be specified in megabytes.
    # If they are preceeded by a G, then multiply by 1024.   

    $top =~ /([^\s]+?)([MG]) real/;
    my($real) = $1;
    $real*=1024 if $2 eq "G";
    &print_pair(1, "packet.memory.real", $real);

    $top =~ /([^\s]+?)([MG]) free/;
    my($free) = $1;
    $free*=1024 if $2 eq "G";
    &print_pair(1, "packet.memory.free", $free);

    $top =~ /([^\s]+?)([MG]) swap in use/;
    my($swap_in_use) = $1;
    $swap_in_use*=1024 if $2 eq "G";
    # DO NOT print this one out... save it for in a moment...

    $top =~ /([^\s]+?)([MG]) swap free/;
    my($swap_free) = $1;
    $swap_free*=1024 if $2 eq "G";
    &print_pair(1, "packet.memory.swap_free", $swap_free);

    # AJ requested total swap instead of swap_in_use, so here we go!
    &print_pair(1, "packet.memory.swap_total", $swap_free + $swap_in_use);
}

# sub to get details of the machine's operating system.
sub include_osver() {

    # Find out details about the operating system
    # If these values remain undefined, then the print_pair
    # function shall show the value to be the string "unknown".
    my($os_name) = `$unamebin -s`;
    my($os_release) = `$unamebin -r`;
    my($os_platform) = `$unamebin -m`;
    my($os_sysname) = `$unamebin -n`;
    my($os_version) = `$unamebin -v`;

    &print_pair(0, "packet.os.name", $os_name);
    &print_pair(0, "packet.os.release", $os_release);
    &print_pair(0, "packet.os.platform", $os_platform);
    &print_pair(0, "packet.os.sysname", $os_sysname);
    &print_pair(0, "packet.os.version", $os_version);

}

# sub to get system uptime.
sub include_uptime() {

    # Need a regexp guru to strip the junk on this line
    my($uptime) = `$uptimebin`;

    &print_pair(0, "packet.os.uptime", $uptime);

}
Revision:	1.17
Committed:	Mon Jan 29 12:21:18 2001 UTC (23 years, 9 months ago) by tdb
Content type:	text/plain
Branch:	MAIN
Changes since 1.16:	+14 -2 lines
Log Message:	Added getting of uptime.
#	User	Rev	Content
1	pjm2	1.1	#!/usr/bin/perl -w
2
3			#-----------------------------------------------------------------
4			# Machine statistics grabber
5	pjm2	1.15	# $Author: pjm2 $
6	tdb	1.17	# $Id: statgrab.pl,v 1.16 2001/01/28 19:57:40 pjm2 Exp $
7	pjm2	1.1	#
8			# A Perl script to return various information about a host machine
9			# by examining the output of some common Unix/Linux commands.
10			# This is a stopgap to act as a generic way of collecting the
11			# data. It is perhaps more reliable than the current Java host
12			# at doing this and it can obviously be used by a C++ program as
13			# well until the C++ host is ready to find the information out
14			# itself.
15			#-----------------------------------------------------------------
16
17
18			$\| = 1;
19
20
21			# You'd be silly not to use this ;)
22			use strict;
23
24	tdb	1.13	# Path's
25			my($topbin) = "/usr/local/sbin/top";
26			my($dfbin) = "/usr/bin/df";
27			my($usersbin) = "/usr/ucb/users";
28			my($unamebin) = "/usr/bin/uname";
29	tdb	1.17	my($uptimebin) = "/usr/bin/uptime";
30	tdb	1.13
31	pjm2	1.6	# Run the following components: -
32	tdb	1.3	&print_ident();
33	tdb	1.2	&include_osver();
34	tdb	1.17	&include_uptime();
35	pjm2	1.1	&include_users();
36			&include_top();
37	pjm2	1.5	&include_disk();
38	pjm2	1.1
39	pjm2	1.6	# End the program normally.
40	pjm2	1.1	exit(0);
41
42
43
44	pjm2	1.6
45
46
47
48
49	tdb	1.3	# prints out an identifier for this version of statgrab.pl
50			# the host should check this when reading data
51			# means the host must be checked and updated to work with newer versions.
52			sub print_ident() {
53	tdb	1.17	print 'version statgrab.pl $Revision: 1.16 $';
54	tdb	1.3	print "\n";
55			}
56	pjm2	1.1
57			# sub to print pairs of data, separated by a single space character.
58	pjm2	1.5	# If the second argument is undefined, then the pair is still printed,
59			# however, the value shall be displayed as the string "unknown".
60	pjm2	1.8	# If $type is non-zero, then "0" is printed instead of "unknown".
61			sub print_pair($$$) {
62			my($type, $name, $value) = @_;
63	pjm2	1.1
64			if (!defined $value) {
65	pjm2	1.8	if ($type) {
66	pjm2	1.9	$value = "0.00";
67	pjm2	1.8	}
68			else {
69			$value = "unknown";
70			}
71	pjm2	1.1	}
72
73			# Remove the trailing linefeed if we've not already done so.
74			chomp($value);
75
76			# print the pair of data with a space inbetween.
77			print "$name $value\n";
78			}
79
80
81	pjm2	1.5	# sub to find out disk partition information, if it exists.
82			sub include_disk() {
83
84			# Run the df program.
85	tdb	1.13	my(@df) = `$dfbin -ak`;
86	pjm2	1.5
87			# Go through each line of the program, looking for each thing we want.
88			my($partition_no) = 0;
89			for (my($i) = 0; $i < $#df; $i++) {
90			my($line) = $df[$i];
91	pjm2	1.7	$line =~ /^(\/[^\s])\s([0-9])\s([0-9])\s([0-9])\s[^\s]\s(\/[^\s])\s/;
92	pjm2	1.5	# $4 will not match unless everything before it does...
93	pjm2	1.7	if (defined $5) {
94			my ($filesystem, $kbytes, $used, $avail, $mount) = ($1, $2, $3, $4, $5);
95	pjm2	1.8	&print_pair(0, "packet.disk.p$partition_no.attributes.name", $filesystem);
96			&print_pair(1, "packet.disk.p$partition_no.attributes.kbytes", $kbytes);
97			&print_pair(1, "packet.disk.p$partition_no.attributes.used", $used);
98			&print_pair(1, "packet.disk.p$partition_no.attributes.avail", $avail);
99			&print_pair(0, "packet.disk.p$partition_no.attributes.mount", $mount);
100	pjm2	1.5	++$partition_no;
101			}
102			}
103
104			}
105
106			# sub to find out the list of all (non-unique) usernames logged
107			# in to the machine and how many their are. (not
108	pjm2	1.1	sub include_users() {
109
110			# Find out all users on this machine.
111	tdb	1.13	my($users) = `$usersbin`;
112	pjm2	1.16	$users = "\n" unless defined $users;
113			chop $users;
114	pjm2	1.14	my($users_count) = 0;
115			$users_count++ while $users =~ /\w+/g;
116	pjm2	1.1	my($users_list) = $users;
117
118	pjm2	1.8	&print_pair(1, "packet.users.count", $users_count);
119			&print_pair(0, "packet.users.list", $users_list);
120	pjm2	1.1	}
121
122
123	pjm2	1.5	# sub to run a series of regexps on the output of 'top' to
124			# gather various machine statistics.
125	pjm2	1.1	sub include_top() {
126
127			# Find out some numbers from top.
128	tdb	1.13	my(@top) = `$topbin -d2 -s1 0`;
129	pjm2	1.1	my($top) = join(" ", @top);
130			$top =~ s/\n//g;
131
132	pjm2	1.8	&print_pair(1, "packet.load.load1", $top =~ /load averages:\s*([^\s]+?),/);
133			&print_pair(1, "packet.load.load5", $top =~ /load averages:\s.+?,\s([^\s]+?),/);
134			&print_pair(1, "packet.load.load15", $top =~ /load averages:\s.+?,\s.+?,\s([^\s]+?)\s/);
135			&print_pair(1, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
136			&print_pair(1, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
137			&print_pair(1, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
138			&print_pair(1, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
139			&print_pair(1, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
140			&print_pair(1, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
141			&print_pair(1, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
142			&print_pair(1, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
143			&print_pair(1, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
144			&print_pair(1, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
145	pjm2	1.10
146			# The following need to be specified in megabytes.
147			# If they are preceeded by a G, then multiply by 1024.
148
149			$top =~ /([^\s]+?)([MG]) real/;
150	pjm2	1.11	my($real) = $1;
151			$real*=1024 if $2 eq "G";
152	pjm2	1.10	&print_pair(1, "packet.memory.real", $real);
153
154			$top =~ /([^\s]+?)([MG]) free/;
155	pjm2	1.11	my($free) = $1;
156			$free*=1024 if $2 eq "G";
157	pjm2	1.10	&print_pair(1, "packet.memory.free", $free);
158
159			$top =~ /([^\s]+?)([MG]) swap in use/;
160	pjm2	1.11	my($swap_in_use) = $1;
161			$swap_in_use*=1024 if $2 eq "G";
162	pjm2	1.12	# DO NOT print this one out... save it for in a moment...
163	pjm2	1.10
164			$top =~ /([^\s]+?)([MG]) swap free/;
165	pjm2	1.11	my($swap_free) = $1;
166			$swap_free*=1024 if $2 eq "G";
167	pjm2	1.10	&print_pair(1, "packet.memory.swap_free", $swap_free);
168	pjm2	1.12
169			# AJ requested total swap instead of swap_in_use, so here we go!
170			&print_pair(1, "packet.memory.swap_total", $swap_free + $swap_in_use);
171	tdb	1.2	}
172
173	pjm2	1.5	# sub to get details of the machine's operating system.
174	tdb	1.2	sub include_osver() {
175
176			# Find out details about the operating system
177	pjm2	1.5	# If these values remain undefined, then the print_pair
178			# function shall show the value to be the string "unknown".
179	tdb	1.13	my($os_name) = `$unamebin -s`;
180			my($os_release) = `$unamebin -r`;
181			my($os_platform) = `$unamebin -m`;
182			my($os_sysname) = `$unamebin -n`;
183			my($os_version) = `$unamebin -v`;
184	tdb	1.2
185	pjm2	1.8	&print_pair(0, "packet.os.name", $os_name);
186			&print_pair(0, "packet.os.release", $os_release);
187			&print_pair(0, "packet.os.platform", $os_platform);
188			&print_pair(0, "packet.os.sysname", $os_sysname);
189			&print_pair(0, "packet.os.version", $os_version);
190	tdb	1.2
191	pjm2	1.1	}
192	tdb	1.17
193			# sub to get system uptime.
194			sub include_uptime() {
195
196			# Need a regexp guru to strip the junk on this line
197			my($uptime) = `$uptimebin`;
198
199			&print_pair(0, "packet.os.uptime", $uptime);
200
201			}