[ViewVC] Diff of: i-scream/projects/cms/source/host/generic/statgrab.pl

Comparing projects/cms/source/host/generic/statgrab.pl (file contents):
Revision 1.1 by pjm2, Fri Jan 19 19:37:59 2001 UTC vs.
Revision 1.38 by pjm2, Thu Mar 15 10:45:15 2001 UTC

+# You'd be silly not to use this ;)
+use strict;
-+
+# Have to hope this will work really.
-+
+my($ostype) = `uname -s`; chop($ostype);
-+
-+
+# Decide which paths we should use.
-+
+my($topbin); my($dfbin); my($usersbin); my($unamebin); my($uptimebin);
-+
-+
+if ($ostype eq "SunOS") {
-+
+    # covers: Solaris 8
-+
+    $topbin = "/usr/local/sbin/top -d2 -s1 0";
-+
+    $dfbin = "/usr/bin/df";
-+
+    $usersbin = "/usr/ucb/users";
-+
+    $unamebin = "/usr/bin/uname";
-+
+    $uptimebin = "/usr/bin/uptime";
-+
+}
-+
+elsif ($ostype eq "Linux") {
-+
+    # covers: Debian r2.2
-+
+    $topbin = "/usr/bin/top -d1 -n0 -b";
-+
+    $dfbin = "/bin/df";
-+
+    $usersbin = "/usr/bin/users";
-+
+    $unamebin = "/bin/uname";
-+
+    $uptimebin = "/usr/bin/uptime";
-+
+}
-+
+elsif ($ostype eq "FreeBSD") {
-+
+    # covers: FreeBSD 4.2-STABLE
-+
+    $topbin = "/usr/bin/top -d2 -s1 0";
-+
+    $dfbin = "/bin/df";
-+
+    $usersbin = "/usr/bin/users";
-+
+    $unamebin = "/usr/bin/uname";
-+
+    $uptimebin = "/usr/bin/uptime";
-+
+}
-+
+else {
-+
+    print "statgrab.pl Error: Unable to identify system type - \"$ostype\".\n";
-+
+    print "\"uname -s\" does not report one of the following known types;\n";
-+
+    print "      SunOS, Linux, FreeBSD\n";
-+
+    exit(1);
-+
+}
-+
-+
+# Run the following components: -
-+
+&print_ident();
-+
+&include_osver();
-+
+&include_uptime();
+&include_users();
+&include_top();
-+
+&include_disk();
-+
+# End the program normally.
+exit(0);
-+
+# prints out an identifier for this version of statgrab.pl
-+
+# the host should check this when reading data
-+
+# means the host must be checked and updated to work with newer versions.
-+
+sub print_ident() {
-+
+    print 'version statgrab.pl $Revision$';
-+
+    print "\n";
-+
+}
-+
+# sub to print pairs of data, separated by a single space character.
-<
+sub print_pair($$) {
-<
+    my($name, $value) = @_;
->
+# If the second argument is undefined, then the pair is still printed,
->
+# however, the value shall be displayed as the the 'default' value
->
+# if the passed value was undefined.
->
+sub print_pair($$$) {
->
+    my($default, $name, $value) = @_;
+    if (!defined $value) {
-<
+        $value = "unknown";
->
+        $value = $default;
+    # Remove the trailing linefeed if we've not already done so.
-+
+# sub to find out disk partition information, if it exists.
-+
+sub include_disk() {
-+
-+
+    # Run the df program.
-+
+    my(@df) = `$dfbin -ak`;
-+
-+
+    # Go through each line of the program, looking for each thing we want.
-+
+    my($partition_no) = 0;
-+
+    for (my($i) = 0; $i < $#df; $i++) {
-+
+        my($line) = $df[$i];
-+
+        $line =~ /^([^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
-+
+        # $4 will not match unless everything before it does...
-+
+        if (defined $5) {
-+
+            my ($filesystem, $kbytes, $used, $avail, $mount) = ($1, $2, $3, $4, $5);
-+
+            &print_pair("unknown", "packet.disk.p$partition_no.attributes.name", $filesystem);
-+
+            &print_pair(0, "packet.disk.p$partition_no.attributes.kbytes", $kbytes);
-+
+            &print_pair(0, "packet.disk.p$partition_no.attributes.used", $used);
-+
+            &print_pair(0, "packet.disk.p$partition_no.attributes.avail", $avail);
-+
+            &print_pair("unknown", "packet.disk.p$partition_no.attributes.mount", $mount);
-+
+            ++$partition_no;
-+
+        }
-+
+    }
-+
-+
+}
-+
-+
+# sub to find out the list of all (non-unique) usernames logged
-+
+# in to the machine and how many their are. (not
+sub include_users() {
+    # Find out all users on this machine.
-<
+    my($users) = `users`;
-<
+    my(@users) = split(/\s+/, $users);
->
+    my($users) = `$usersbin`;
->
+    $users = "\n" unless defined $users;
->
+    chop $users;
->
+    my($users_count) = 0;
->
+    $users_count++ while $users =~ /\w+/g;
->
+    my($users_list) = $users." ";
-<
+    my($users_count) = $#users + 1;
-<
+    my($users_list) = $users;
-<
-<
+    &print_pair("packet.users.count", $users_count);
-<
+    &print_pair("packet.users.list", $users_list);
->
+    &print_pair(0, "packet.users.count", $users_count);
->
+    &print_pair("unknown", "packet.users.list", $users_list);
-+
+# sub to run a series of regexps on the output of 'top' to
-+
+# gather various machine statistics.
+sub include_top() {
+    # Find out some numbers from top.
-<
+    my(@top) = `top -d2 -s1 0`;
->
+    my(@top) = `$topbin`;
+    my($top) = join(" ", @top);
+    $top =~ s/\n//g;
-<
+    &print_pair("packet.load.load1", $top =~ /load averages:\s*([^\s]+?),/);
-<
+    &print_pair("packet.load.load5", $top =~ /load averages:\s*.+?,\s*([^\s]+?),/);
-<
+    &print_pair("packet.load.load15", $top =~ /load averages:\s*.+?,\s*.+?,\s*([^\s]+?)\s*/);
-<
+    &print_pair("packet.processes.total", $top =~ /([^\s]+?) processes:/);
-<
+    &print_pair("packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
-<
+    &print_pair("packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
-<
+    &print_pair("packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
-<
+    &print_pair("packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
-<
+    &print_pair("packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
-<
+    &print_pair("packet.cpu.user", $top =~ /([^\s]+?)% user/);
-<
+    &print_pair("packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
-<
+    &print_pair("packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
-<
+    &print_pair("packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
-<
+    &print_pair("packet.memory.real", $top =~ /([^\s]+?)[MG] real/);
-<
+    &print_pair("packet.memory.free", $top =~ /([^\s]+?)[MG] free/);
-<
+    &print_pair("packet.memory.swap_in_use", $top =~ /([^\s]+?)[MG] swap in use/);
-<
+    &print_pair("packet.memory.swap_free", $top =~ /([^\s]+?)[MG] swap free/);
->
+    if($ostype eq "SunOS") {
->
+        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
->
+        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
->
+        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
->
+        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
->
+        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
->
+        &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
->
+        &print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
->
+        &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
->
+        &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
->
+        &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
->
->
+        # The following need to be specified in megabytes.
->
+        # If they are preceeded by a G, then multiply by 1024.
->
->
+        $top =~ /([^\s]+?)([KMG]) real/;
->
+        my($real) = $1;
->
+        $real*=1024 if $2 eq "G";
->
+        $real/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.memory.total", $real);
->
->
+        $top =~ /([^\s]+?)([KMG]) free/;
->
+        my($free) = $1;
->
+        $free*=1024 if $2 eq "G";
->
+        $free/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.memory.free", $free);
->
->
+        $top =~ /([^\s]+?)([KMG]) swap in use/;
->
+        my($swap_in_use) = $1;
->
+        $swap_in_use*=1024 if $2 eq "G";
->
+        $swap_in_use/=1024 if $2 eq "K";
->
+        # DO NOT print this one out... save it for in a moment...
->
->
+        $top =~ /([^\s]+?)([KMG]) swap free/;
->
+        my($swap_free) = $1;
->
+        $swap_free*=1024 if $2 eq "G";
->
+        $swap_free/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.swap.free", $swap_free);
->
->
+        # AJ requested total swap instead of swap_in_use, so here we go!
->
+        &print_pair(0, "packet.swap.total", $swap_free + $swap_in_use);
->
+    }
->
+    elsif ($ostype eq "FreeBSD") {
->
+        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
->
+        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
->
+        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
->
+        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
->
+        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
->
+        &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
->
+        &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
->
+        &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
->
+        &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
->
->
+        # FreeBSD is a bit different, we need to get user and nice.
->
+        my($user) = 0;
->
+        if($top =~ /([^\s]+?)% user/) { $user += $1; }
->
+        if($top =~ /([^\s]+?)% nice/) { $user += $1; }
->
+        &print_pair(0, "packet.cpu.user", $user);
->
->
+        # The following need to be specified in megabytes.
->
+        # If they are preceeded by a G, then multiply by 1024.
->
->
+        # !! Can't get the total memory !!
->
+        #$top =~ /([^\s]+?)([MG]) real/;
->
+        #my($real) = $1;
->
+        #$real*=1024 if $2 eq "G";
->
+        #&print_pair(0, "packet.memory.total", $real);
->
+        &print_pair(0, "packet.memory.total", 0);
->
->
+        $top =~ /([^\s]+?)([KMG]) Free/;
->
+        my($free) = $1;
->
+        $free*=1024 if $2 eq "G";
->
+        $free/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.memory.free", $free);
->
->
+        $top =~ /Swap: ([^\s]+?)([KMG]) Total/;
->
+        my($swap_total) = $1;
->
+        $swap_total*=1024 if $2 eq "G";
->
+        $swap_total/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.swap.total", $swap_total);
->
->
+        $top =~ /Swap:.*, ([^\s]+?)([KMG]) Free/;
->
+        my($swap_free) = $1;
->
+        $swap_free*=1024 if $2 eq "G";
->
+        $swap_free/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.swap.free", $swap_free);
->
+    }
->
+    elsif ($ostype eq "Linux") {
->
+        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
->
+        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
->
+        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
->
+        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
->
+        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
->
+        &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
->
+        &print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
->
+        &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
->
+        &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
->
+        &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
->
->
+        # The following need to be specified in megabytes.
->
+        # If they are preceeded by a G, then multiply by 1024.
->
->
+        $top =~ / ([^\s]+?)([KMG]) av/;
->
+        my($real) = $1;
->
+        $real*=1024 if $2 eq "G";
->
+        $real/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.memory.total", int($real));
->
->
+        $top =~ / ([^\s]+?)([KMG]) free/;
->
+        my($free) = $1;
->
+        $free*=1024 if $2 eq "G";
->
+        $free/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.memory.free", int($free));
->
->
+        $top =~ /Swap:\s+([^\s]+?)([KMG]) av/;
->
+        my($swap_total) = $1;
->
+        $swap_total*=1024 if $2 eq "G";
->
+        $swap_total/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.swap.total", int($swap_total));
->
->
+        $top =~ /Swap:.*, ([^\s]+?)([KMG]) free/;
->
+        my($swap_free) = $1;
->
+        $swap_free*=1024 if $2 eq "G";
->
+        $swap_free/=1024 if $2 eq "K";
->
+        &print_pair(0, "packet.swap.free", int($swap_free));
->
+    }
->
+    else {
->
+        # we could have some catchall here
->
+        # but as it stands this means we'll just skip top stuff
->
+        # for unknown systems
->
+    }
->
+}
->
->
+# sub to get details of the machine's operating system.
->
+sub include_osver() {
->
->
+    # Find out details about the operating system
->
+    # If these values remain undefined, then the print_pair
->
+    # function shall show the value to be the string "unknown".
->
+    my($os_name) = `$unamebin -s`;
->
+    my($os_release) = `$unamebin -r`;
->
+    my($os_platform) = `$unamebin -m`;
->
+    my($os_sysname) = `$unamebin -n`;
->
+    my($os_version) = `$unamebin -v`;
->
->
+    &print_pair("unknown", "packet.os.name", $os_name);
->
+    &print_pair("unknown", "packet.os.release", $os_release);
->
+    &print_pair("unknown", "packet.os.platform", $os_platform);
->
+    &print_pair("unknown", "packet.os.sysname", $os_sysname);
->
+    &print_pair("unknown", "packet.os.version", $os_version);
->
->
+}
->
->
+# sub to get system uptime in seconds.
->
+sub include_uptime() {
->
->
+    # debug stuff, all the different cases
->
->
+    # normal
->
+    #my($uptime) = "  4:48pm  up 49 day(s),  6:30,  201 users,  load average: 0.33, 0.35, 0.38\n";
->
+    # 0 days
->
+    #my($uptime) = "  4:48pm  up 6:30,  201 users,  load average: 0.33, 0.35, 0.38\n";
->
+    # 0 hours
->
+    #my($uptime) = "  4:48pm  up 49 day(s),  30 min(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
->
+    # 0 mins
->
+    #my($uptime) = "  4:48pm  up 49 day(s),  6 hr(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
->
+    # 0 days and 0 mins
->
+    #my($uptime) = "  4:48pm  up 6 hr(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
->
+    # 0 days and 0 hours
->
+    #my($uptime) = "  4:48pm  up 30 min(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
->
+    # 0 hours and 0 mins
->
+    #my($uptime) = "  4:48pm  up 49 day(s), 201 users,  load average: 0.33, 0.35, 0.38\n";
->
->
+    # grab the uptime
->
+    my($uptime) = `$uptimebin`;
-+
+    &print_pair(0, "packet.load.load1", $uptime =~ /load average.?:\s*([^\s]+?),/);
-+
+    &print_pair(0, "packet.load.load5", $uptime =~ /load average.?:\s*.+?,\s*([^\s]+?),/);
-+
+    &print_pair(0, "packet.load.load15", $uptime =~ /load average.?:\s*.+?,\s*.+?,\s*([^\s]+)/);
-+
-+
+    # work out the days, hours, and minutes
-+
-+
+    if ($uptime =~ /day.*,\s+([0-9]+):([0-9]+)/) {
-+
+      # normal
-+
+        $uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+):([0-9]+)/;
-+
+        $uptime = "$1:$2:$3";
-+
+    }
-+
+    else {
-+
+        if ($uptime =~ /day/) {
-+
+            if ($uptime =~ /hr/) {
-+
+              # 0 minutes
-+
+                $uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
-+
+                $uptime = "$1:$2:0";
-+
+            }
-+
+            elsif ($uptime =~ /min/) {
-+
+              # 0 hours
-+
+                $uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
-+
+                $uptime = "$1:0:$2";
-+
+            }
-+
+            else {
-+
+              # 0 hours and 0 mins
-+
+                $uptime =~ /up\s+([0-9]+)/;
-+
+                $uptime = "$1:0:0";
-+
+            }
-+
+        }
-+
+        elsif ($uptime =~ /hr/) {
-+
+          # 0 days and 0 minutes
-+
+            $uptime =~ /up\s+([0-9]+)\s+/;
-+
+            $uptime = "0:$1:0";
-+
+        }
-+
+        elsif ($uptime =~ /min/) {
-+
+          # 0 days and 0 hours
-+
+            $uptime =~ /up\s+([0-9]+)\s+/;
-+
+            $uptime = "0:0:$1";
-+
+        }
-+
+        else {
-+
+          # 0 days
-+
+            $uptime =~ /up\s+([0-9]+):([0-9]+)/;
-+
+            $uptime = "0:$1:$2";
-+
+        }
-+
+    }
-+
-+
+    # turn into seconds
-+
+    $uptime =~ /([0-9]+):([0-9]+):([0-9]+)/;
-+
+    $uptime = ($3+($2+($1*24))*60)*60;
-+
-+
+    # print the value out
-+
+    &print_pair("unknown", "packet.os.uptime", $uptime);
-+

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing projects/cms/source/host/generic/statgrab.pl (file contents): Revision 1.1 by pjm2, Fri Jan 19 19:37:59 2001 UTC vs. Revision 1.38 by pjm2, Thu Mar 15 10:45:15 2001 UTC

Diff Legend

Comparing projects/cms/source/host/generic/statgrab.pl (file contents):
Revision 1.1 by pjm2, Fri Jan 19 19:37:59 2001 UTC vs.
Revision 1.38 by pjm2, Thu Mar 15 10:45:15 2001 UTC