ViewVC Help

View File | Revision Log | Show Annotations | Revision Graph | Root Listing

root/i-scream/projects/cms/source/host/generic/statgrab.pl

Comparing projects/cms/source/host/generic/statgrab.pl (file contents):
Revision 1.25 by pjm2, Mon Feb 5 17:05:22 2001 UTC vs.
Revision 1.41 by tdb, Tue Mar 20 13:04:22 2001 UTC

#	Line 21 | Line 21 | $| = 1;
21		# You'd be silly not to use this ;)
22		use strict;
23
24	<	# Paths
25	<	my($topbin) = "/usr/local/sbin/top";
26	<	my($dfbin) = "/usr/bin/df";
27	<	my($usersbin) = "/usr/ucb/users";
28	<	my($unamebin) = "/usr/bin/uname";
29	<	my($uptimebin) = "/usr/bin/uptime";
24	>	# Have to hope this will work really.
25	>	my($ostype) = `uname -s`; chop($ostype);
26
27	+	# Decide which paths we should use.
28	+	my($topbin); my($dfbin); my($usersbin);
29	+	my($unamebin); my($uptimebin); my($sysctlbin);
30	+
31	+	if ($ostype eq "SunOS") {
32	+	# covers: Solaris 8
33	+	$topbin = "/usr/local/sbin/top -d2 -s1 0";
34	+	$dfbin = "/usr/bin/df";
35	+	$usersbin = "/usr/ucb/users";
36	+	$unamebin = "/usr/bin/uname";
37	+	$uptimebin = "/usr/bin/uptime";
38	+	}
39	+	elsif ($ostype eq "Linux") {
40	+	# covers: Debian r2.2
41	+	$topbin = "/usr/bin/top -d1 -n2 -b -p0";
42	+	$dfbin = "/bin/df";
43	+	$usersbin = "/usr/bin/users";
44	+	$unamebin = "/bin/uname";
45	+	$uptimebin = "/usr/bin/uptime";
46	+	}
47	+	elsif ($ostype eq "FreeBSD") {
48	+	# covers: FreeBSD 4.2-STABLE
49	+	$topbin = "/usr/bin/top -d2 -s1 0";
50	+	$dfbin = "/bin/df";
51	+	$usersbin = "/usr/bin/users";
52	+	$unamebin = "/usr/bin/uname";
53	+	$uptimebin = "/usr/bin/uptime";
54	+	$sysctlbin = "/sbin/sysctl";
55	+	}
56	+	else {
57	+	print "statgrab.pl Error: Unable to identify system type - \"$ostype\".\n";
58	+	print "\"uname -s\" does not report one of the following known types;\n";
59	+	print "      SunOS, Linux, FreeBSD\n";
60	+	exit(1);
61	+	}
62	+
63		# Run the following components: -
64		&print_ident();
65		&include_osver();
#	Line 42 | Line 74 | exit(0);
74
75
76
45	–
46	–
47	–
48	–
77		# prints out an identifier for this version of statgrab.pl
78		# the host should check this when reading data
79		# means the host must be checked and updated to work with newer versions.
#	Line 83 | Line 111 | sub include_disk() {
111		my($partition_no) = 0;
112		for (my($i) = 0; $i < $#df; $i++) {
113		my($line) = $df[$i];
114	<	$line =~ /^(\/[^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
114	>	$line =~ /^([^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
115		# $4 will not match unless everything before it does...
116		if (defined $5) {
117		my ($filesystem, $kbytes, $used, $avail, $mount) = ($1, $2, $3, $4, $5);
#	Line 120 | Line 148 | sub include_users() {
148		sub include_top() {
149
150		# Find out some numbers from top.
151	<	my(@top) = `$topbin -d2 -s1 0`;
151	>	my(@top) = `$topbin`;
152		my($top) = join(" ", @top);
153	<	$top =~ s/\n//g;
153	>	$top =~ s/\n/ /g;
154
155	<	&print_pair(0, "packet.load.load1", $top =~ /load averages:\s*([^\s]+?),/);
156	<	&print_pair(0, "packet.load.load5", $top =~ /load averages:\s*.+?,\s*([^\s]+?),/);
157	<	&print_pair(0, "packet.load.load15", $top =~ /load averages:\s*.+?,\s*.+?,\s*([^\s]+?)\s/);
158	<	&print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
159	<	&print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
160	<	&print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
161	<	&print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
162	<	&print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
163	<	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
164	<	&print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
165	<	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
166	<	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
167	<	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
155	>	if($ostype eq "SunOS") {
156	>	&print_pair(0, "packet.processes.total", $top =~ /([0-9]+?) processes:/);
157	>	&print_pair(0, "packet.processes.sleeping", $top =~ /([0-9]+?) sleeping/);
158	>	&print_pair(0, "packet.processes.zombie", $top =~ /([0-9]+?) zombie/);
159	>	&print_pair(0, "packet.processes.stopped", $top =~ /([0-9]+?) stopped/);
160	>	&print_pair(0, "packet.processes.cpu", $top =~ /([0-9]+?)\s*on cpu/);
161	>	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
162	>	&print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
163	>	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
164	>	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
165	>	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
166	>
167	>	# The following need to be specified in megabytes.
168	>	# If they are preceeded by a G, then multiply by 1024.
169	>
170	>	$top =~ /([0-9]+?)([KMG]) real/;
171	>	my($real) = $1;
172	>	$real*=1024 if $2 eq "G";
173	>	$real/=1024 if $2 eq "K";
174	>	&print_pair(0, "packet.memory.total", $real);
175	>
176	>	$top =~ /([0-9]+?)([KMG]) free/;
177	>	my($free) = $1;
178	>	$free*=1024 if $2 eq "G";
179	>	$free/=1024 if $2 eq "K";
180	>	&print_pair(0, "packet.memory.free", $free);
181	>
182	>	$top =~ /([0-9]+?)([KMG]) swap in use/;
183	>	my($swap_in_use) = $1;
184	>	$swap_in_use*=1024 if $2 eq "G";
185	>	$swap_in_use/=1024 if $2 eq "K";
186	>	# DO NOT print this one out... save it for in a moment...
187	>
188	>	$top =~ /([0-9]+?)([KMG]) swap free/;
189	>	my($swap_free) = $1;
190	>	$swap_free*=1024 if $2 eq "G";
191	>	$swap_free/=1024 if $2 eq "K";
192	>	&print_pair(0, "packet.swap.free", $swap_free);
193	>
194	>	&print_pair(0, "packet.swap.total", $swap_free + $swap_in_use);
195	>	}
196	>	elsif ($ostype eq "FreeBSD") {
197	>	&print_pair(0, "packet.processes.total", $top =~ /([0-9]+?) processes:/);
198	>	&print_pair(0, "packet.processes.sleeping", $top =~ /([0-9]+?) sleeping/);
199	>	&print_pair(0, "packet.processes.zombie", $top =~ /([0-9]+?) zombie/);
200	>	&print_pair(0, "packet.processes.stopped", $top =~ /([0-9]+?) stopped/);
201	>	&print_pair(0, "packet.processes.cpu", $top =~ /([0-9]+?)\s*running/);
202	>	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
203	>	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
204	>	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
205	>	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
206
207	<	# The following need to be specified in megabytes.
208	<	# If they are preceeded by a G, then multiply by 1024.
207	>	# FreeBSD is a bit different, we need to get user and nice.
208	>	my($user) = 0;
209	>	if($top =~ /([^\s]+?)% user/) { $user += $1; }
210	>	if($top =~ /([^\s]+?)% nice/) { $user += $1; }
211	>	&print_pair(0, "packet.cpu.user", $user);
212	>
213	>	# The following need to be specified in megabytes.
214	>	# If they are preceeded by a G, then multiply by 1024.
215	>
216	>	# get RAM slightly differently
217	>	my($real) = `$sysctlbin -n hw.physmem`;
218	>	my($free) = $real - `$sysctlbin -n hw.usermem`;
219	>
220	>	# turn bytes to megabytes
221	>	$real = ($real / 1024) / 1024;
222	>	$free = ($free / 1024) / 1024;
223	>
224	>	&print_pair(0, "packet.memory.total", $real);
225	>	&print_pair(0, "packet.memory.free", $free);
226	>
227	>	$top =~ /Swap: ([0-9]+?)([KMG]) Total/;
228	>	my($swap_total) = $1;
229	>	$swap_total*=1024 if $2 eq "G";
230	>	$swap_total/=1024 if $2 eq "K";
231	>	&print_pair(0, "packet.swap.total", $swap_total);
232	>
233	>	$top =~ /Swap:.*, ([0-9]+?)([KMG]) Free/;
234	>	my($swap_free) = $1;
235	>	$swap_free*=1024 if $2 eq "G";
236	>	$swap_free/=1024 if $2 eq "K";
237	>	&print_pair(0, "packet.swap.free", $swap_free);
238	>
239	>	my($loads) = `$sysctlbin -n vm.loadavg`;
240	>	$loads =~ /\s+([^\s]+?)\s+([^\s]+?)\s+([^\s]+?)\s+/;
241	>	&print_pair(0, "packet.load.load1", $1);
242	>	&print_pair(0, "packet.load.load5", $2);
243	>	&print_pair(0, "packet.load.load15", $3);
244	>	}
245	>	elsif ($ostype eq "Linux") {
246	>	my ($top) = "";
247	>	foreach my $line (@top) {
248	>	$top = $line . $top;
249	>	}
250	>	$top =~ s/\n/ /g;
251
252	<	$top =~ /([^\s]+?)([MG]) real/;
253	<	my($real) = $1;
254	<	$real*=1024 if $2 eq "G";
255	<	&print_pair(0, "packet.memory.real", $real);
252	>	&print_pair(0, "packet.processes.total", $top =~ /([0-9]+?) processes:/);
253	>	&print_pair(0, "packet.processes.sleeping", $top =~ /([0-9]+?) sleeping/);
254	>	&print_pair(0, "packet.processes.zombie", $top =~ /([0-9]+?) zombie/);
255	>	&print_pair(0, "packet.processes.stopped", $top =~ /([0-9]+?) stopped/);
256	>	&print_pair(0, "packet.processes.cpu", $top =~ /([0-9]+?)\s*running/);
257	>	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
258	>	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
259	>	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
260	>	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
261
262	<	$top =~ /([^\s]+?)([MG]) free/;
263	<	my($free) = $1;
264	<	$free*=1024 if $2 eq "G";
265	<	&print_pair(0, "packet.memory.free", $free);
266	<
267	<	$top =~ /([^\s]+?)([MG]) swap in use/;
268	<	my($swap_in_use) = $1;
269	<	$swap_in_use*=1024 if $2 eq "G";
270	<	# DO NOT print this one out... save it for in a moment...
271	<
272	<	$top =~ /([^\s]+?)([MG]) swap free/;
273	<	my($swap_free) = $1;
274	<	$swap_free*=1024 if $2 eq "G";
275	<	&print_pair(0, "packet.memory.swap_free", $swap_free);
276	<
277	<	# AJ requested total swap instead of swap_in_use, so here we go!
278	<	&print_pair(0, "packet.memory.swap_total", $swap_free + $swap_in_use);
262	>	# FreeBSD is a bit different, we need to get user and nice.
263	>	my($user) = 0;
264	>	if($top =~ /([^\s]+?)% user/) { $user += $1; }
265	>	if($top =~ /([^\s]+?)% nice/) { $user += $1; }
266	>	&print_pair(0, "packet.cpu.user", $user);
267	>
268	>	# The following need to be specified in megabytes.
269	>	# If they are preceeded by a G, then multiply by 1024.
270	>
271	>	$top =~ / ([0-9]+?)([KMG]) av/;
272	>	my($real) = $1;
273	>	$real*=1024 if $2 eq "G";
274	>	$real/=1024 if $2 eq "K";
275	>	&print_pair(0, "packet.memory.total", int($real));
276	>
277	>	$top =~ / ([0-9]+?)([KMG]) free/;
278	>	my($free) = $1;
279	>	$free*=1024 if $2 eq "G";
280	>	$free/=1024 if $2 eq "K";
281	>	&print_pair(0, "packet.memory.free", int($free));
282	>
283	>	$top =~ /Swap:\s+([0-9]]+?)([KMG]) av/;
284	>	my($swap_total) = $1;
285	>	$swap_total*=1024 if $2 eq "G";
286	>	$swap_total/=1024 if $2 eq "K";
287	>	&print_pair(0, "packet.swap.total", int($swap_total));
288	>
289	>	$top =~ /Swap:.*, ([0-9]+?)([KMG]) free/;
290	>	my($swap_free) = $1;
291	>	$swap_free*=1024 if $2 eq "G";
292	>	$swap_free/=1024 if $2 eq "K";
293	>	&print_pair(0, "packet.swap.free", int($swap_free));
294	>	}
295	>	else {
296	>	# we could have some catchall here
297	>	# but as it stands this means we'll just skip top stuff
298	>	# for unknown systems
299	>	}
300		}
301
302		# sub to get details of the machine's operating system.
#	Line 185 | Line 319 | sub include_osver() {
319
320		}
321
322	<	# sub to get system uptime.
322	>	# sub to get system uptime in seconds.
323		sub include_uptime() {
324
325	+	# debug stuff, all the different cases
326	+
327	+	# normal
328	+	#my($uptime) = "  4:48pm  up 49 day(s),  6:30,  201 users,  load average: 0.33, 0.35, 0.38\n";
329	+	# 0 days
330	+	#my($uptime) = "  4:48pm  up 6:30,  201 users,  load average: 0.33, 0.35, 0.38\n";
331	+	# 0 hours
332	+	#my($uptime) = "  4:48pm  up 49 day(s),  30 min(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
333	+	# 0 mins
334	+	#my($uptime) = "  4:48pm  up 49 day(s),  6 hr(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
335	+	# 0 days and 0 mins
336	+	#my($uptime) = "  4:48pm  up 6 hr(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
337	+	# 0 days and 0 hours
338	+	#my($uptime) = "  4:48pm  up 30 min(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
339	+	# 0 hours and 0 mins
340	+	#my($uptime) = "  4:48pm  up 49 day(s), 201 users,  load average: 0.33, 0.35, 0.38\n";
341	+
342		# grab the uptime
343		my($uptime) = `$uptimebin`;
344	+
345	+	if($ostype ne "FreeBSD") {
346	+	&print_pair(0, "packet.load.load1", $uptime =~ /load average.?:\s*([^\s]+?),/);
347	+	&print_pair(0, "packet.load.load5", $uptime =~ /load average.?:\s*.+?,\s*([^\s]+?),/);
348	+	&print_pair(0, "packet.load.load15", $uptime =~ /load average.?:\s*.+?,\s*.+?,\s*([^\s]+)/);
349	+	}
350
351		# work out the days, hours, and minutes
352	<	if ($uptime =~ /hr/) {
353	<	# 0 minutes
197	<	$uptime =~ s/up ([0-9]+) .*, ([0-9]+) .*,/$1:$2:0/;
198	<	}
199	<	elsif ($uptime =~ /min/) {
200	<	# 0 hours
201	<	$uptime =~ s/up ([0-9]+) .*, ([0-9]+) .*,/$1:0:$2/;
202	<	}
203	<	elsif ($uptime =~ /day/) {
352	>
353	>	if ($uptime =~ /day.*,\s+([0-9]+):([0-9]+)/) {
354		# normal
355	<	$uptime =~ s/up ([0-9]+) .*, ([0-9]+):([0-9]+)/$1:$2:$3/;
355	>	$uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+):([0-9]+)/;
356	>	$uptime = "$1:$2:$3";
357		}
358		else {
359	<	# 0 days
360	<	$uptime =~ s/up ([0-9]+):([0-9]+)/0:$1:$2/;
359	>	if ($uptime =~ /day/) {
360	>	if ($uptime =~ /hr/) {
361	>	# 0 minutes
362	>	$uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
363	>	$uptime = "$1:$2:0";
364	>	}
365	>	elsif ($uptime =~ /min/) {
366	>	# 0 hours
367	>	$uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
368	>	$uptime = "$1:0:$2";
369	>	}
370	>	else {
371	>	# 0 hours and 0 mins
372	>	$uptime =~ /up\s+([0-9]+)/;
373	>	$uptime = "$1:0:0";
374	>	}
375	>	}
376	>	elsif ($uptime =~ /hr/) {
377	>	# 0 days and 0 minutes
378	>	$uptime =~ /up\s+([0-9]+)\s+/;
379	>	$uptime = "0:$1:0";
380	>	}
381	>	elsif ($uptime =~ /min/) {
382	>	# 0 days and 0 hours
383	>	$uptime =~ /up\s+([0-9]+)\s+/;
384	>	$uptime = "0:0:$1";
385	>	}
386	>	else {
387	>	# 0 days
388	>	$uptime =~ /up\s+([0-9]+):([0-9]+)/;
389	>	$uptime = "0:$1:$2";
390	>	}
391		}
392
393	<	# turn into minutes
213	<
393	>	# turn into seconds
394		$uptime =~ /([0-9]+):([0-9]+):([0-9]+)/;
395	<	$uptime = $3 + ($2 + $1*24)*60;
396	<
395	>	$uptime = ($3+($2+($1*24))*60)*60;
396	>
397	>	# print the value out
398		&print_pair("unknown", "packet.os.uptime", $uptime);
399
400		}

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines