ViewVC Help

View File | Revision Log | Show Annotations | Revision Graph | Root Listing

root/i-scream/projects/cms/source/host/generic/statgrab.pl

Comparing projects/cms/source/host/generic/statgrab.pl (file contents):
Revision 1.26 by pjm2, Mon Feb 5 17:13:26 2001 UTC vs.
Revision 1.37 by pjm2, Sun Mar 11 12:51:52 2001 UTC

#	Line 21 | Line 21 | $| = 1;
21		# You'd be silly not to use this ;)
22		use strict;
23
24	<	# Paths
25	<	my($topbin) = "/usr/local/sbin/top";
26	<	my($dfbin) = "/usr/bin/df";
27	<	my($usersbin) = "/usr/ucb/users";
28	<	my($unamebin) = "/usr/bin/uname";
29	<	my($uptimebin) = "/usr/bin/uptime";
24	>	# Have to hope this will work really.
25	>	my($ostype) = `uname -s`; chop($ostype);
26
27	+	# Decide which paths we should use.
28	+	my($topbin); my($dfbin); my($usersbin); my($unamebin); my($uptimebin);
29	+
30	+	if ($ostype eq "SunOS") {
31	+	# covers: Solaris 8
32	+	$topbin = "/usr/local/sbin/top -d2 -s1 0";
33	+	$dfbin = "/usr/bin/df";
34	+	$usersbin = "/usr/ucb/users";
35	+	$unamebin = "/usr/bin/uname";
36	+	$uptimebin = "/usr/bin/uptime";
37	+	}
38	+	elsif ($ostype eq "Linux") {
39	+	# covers: Debian r2.2
40	+	$topbin = "/usr/bin/top -d1 -n0 -b";
41	+	$dfbin = "/bin/df";
42	+	$usersbin = "/usr/bin/users";
43	+	$unamebin = "/bin/uname";
44	+	$uptimebin = "/usr/bin/uptime";
45	+	}
46	+	elsif ($ostype eq "FreeBSD") {
47	+	# covers: FreeBSD 4.2-STABLE
48	+	$topbin = "/usr/bin/top -d2 -s1 0";
49	+	$dfbin = "/bin/df";
50	+	$usersbin = "/usr/bin/users";
51	+	$unamebin = "/usr/bin/uname";
52	+	$uptimebin = "/usr/bin/uptime";
53	+	}
54	+	else {
55	+	print "statgrab.pl Error: Unable to identify system type - \"$ostype\".\n";
56	+	print "\"uname -s\" does not report one of the following known types;\n";
57	+	print "      SunOS, Linux, FreeBSD\n";
58	+	exit(1);
59	+	}
60	+
61		# Run the following components: -
62		&print_ident();
63		&include_osver();
#	Line 42 | Line 72 | exit(0);
72
73
74
45	–
46	–
47	–
48	–
75		# prints out an identifier for this version of statgrab.pl
76		# the host should check this when reading data
77		# means the host must be checked and updated to work with newer versions.
#	Line 83 | Line 109 | sub include_disk() {
109		my($partition_no) = 0;
110		for (my($i) = 0; $i < $#df; $i++) {
111		my($line) = $df[$i];
112	<	$line =~ /^(\/[^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
112	>	$line =~ /^([^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
113		# $4 will not match unless everything before it does...
114		if (defined $5) {
115		my ($filesystem, $kbytes, $used, $avail, $mount) = ($1, $2, $3, $4, $5);
#	Line 120 | Line 146 | sub include_users() {
146		sub include_top() {
147
148		# Find out some numbers from top.
149	<	my(@top) = `$topbin -d2 -s1 0`;
149	>	my(@top) = `$topbin`;
150		my($top) = join(" ", @top);
151		$top =~ s/\n//g;
152
153	<	&print_pair(0, "packet.load.load1", $top =~ /load averages:\s*([^\s]+?),/);
154	<	&print_pair(0, "packet.load.load5", $top =~ /load averages:\s*.+?,\s*([^\s]+?),/);
155	<	&print_pair(0, "packet.load.load15", $top =~ /load averages:\s*.+?,\s*.+?,\s*([^\s]+?)\s/);
156	<	&print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
157	<	&print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
158	<	&print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
159	<	&print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
160	<	&print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
161	<	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
162	<	&print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
163	<	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
164	<	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
165	<	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
153	>	if($ostype eq "SunOS") {
154	>	&print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
155	>	&print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
156	>	&print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
157	>	&print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
158	>	&print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
159	>	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
160	>	&print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
161	>	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
162	>	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
163	>	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
164	>
165	>	# The following need to be specified in megabytes.
166	>	# If they are preceeded by a G, then multiply by 1024.
167	>
168	>	$top =~ /([^\s]+?)([MG]) real/;
169	>	my($real) = $1;
170	>	$real*=1024 if $2 eq "G";
171	>	$real/=1024 if $2 eq "K";
172	>	&print_pair(0, "packet.memory.total", $real);
173	>
174	>	$top =~ /([^\s]+?)([MG]) free/;
175	>	my($free) = $1;
176	>	$free*=1024 if $2 eq "G";
177	>	$free/=1024 if $2 eq "K";
178	>	&print_pair(0, "packet.memory.free", $free);
179	>
180	>	$top =~ /([^\s]+?)([MG]) swap in use/;
181	>	my($swap_in_use) = $1;
182	>	$swap_in_use*=1024 if $2 eq "G";
183	>	$swap_in_use/=1024 if $2 eq "K";
184	>	# DO NOT print this one out... save it for in a moment...
185	>
186	>	$top =~ /([^\s]+?)([MG]) swap free/;
187	>	my($swap_free) = $1;
188	>	$swap_free*=1024 if $2 eq "G";
189	>	$swap_free/=1024 if $2 eq "K";
190	>	&print_pair(0, "packet.swap.free", $swap_free);
191	>
192	>	# AJ requested total swap instead of swap_in_use, so here we go!
193	>	&print_pair(0, "packet.swap.total", $swap_free + $swap_in_use);
194	>	}
195	>	elsif ($ostype eq "FreeBSD") {
196	>	&print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
197	>	&print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
198	>	&print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
199	>	&print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
200	>	&print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
201	>	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
202	>	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
203	>	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
204	>	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
205
206	<	# The following need to be specified in megabytes.
207	<	# If they are preceeded by a G, then multiply by 1024.
208	<
209	<	$top =~ /([^\s]+?)([MG]) real/;
210	<	my($real) = $1;
211	<	$real*=1024 if $2 eq "G";
212	<	&print_pair(0, "packet.memory.total", $real);
213	<
214	<	$top =~ /([^\s]+?)([MG]) free/;
215	<	my($free) = $1;
216	<	$free*=1024 if $2 eq "G";
217	<	&print_pair(0, "packet.memory.free", $free);
218	<
219	<	$top =~ /([^\s]+?)([MG]) swap in use/;
220	<	my($swap_in_use) = $1;
221	<	$swap_in_use*=1024 if $2 eq "G";
222	<	# DO NOT print this one out... save it for in a moment...
223	<
224	<	$top =~ /([^\s]+?)([MG]) swap free/;
225	<	my($swap_free) = $1;
226	<	$swap_free*=1024 if $2 eq "G";
227	<	&print_pair(0, "packet.swap.free", $swap_free);
228	<
229	<	# AJ requested total swap instead of swap_in_use, so here we go!
230	<	&print_pair(0, "packet.swap.total", $swap_free + $swap_in_use);
206	>	# FreeBSD is a bit different, we need to get user and nice.
207	>	my($user) = 0;
208	>	if($top =~ /([^\s]+?)% user/) { $user += $1; }
209	>	if($top =~ /([^\s]+?)% nice/) { $user += $1; }
210	>	&print_pair(0, "packet.cpu.user", $user);
211	>
212	>	# The following need to be specified in megabytes.
213	>	# If they are preceeded by a G, then multiply by 1024.
214	>
215	>	# !! Can't get the total memory !!
216	>	#$top =~ /([^\s]+?)([MG]) real/;
217	>	#my($real) = $1;
218	>	#$real*=1024 if $2 eq "G";
219	>	#&print_pair(0, "packet.memory.total", $real);
220	>	&print_pair(0, "packet.memory.total", 0);
221	>
222	>	$top =~ /([^\s]+?)([MG]) Free/;
223	>	my($free) = $1;
224	>	$free*=1024 if $2 eq "G";
225	>	&print_pair(0, "packet.memory.free", $free);
226	>
227	>	$top =~ /Swap: ([^\s]+?)([MG]) Total/;
228	>	my($swap_total) = $1;
229	>	$swap_total*=1024 if $2 eq "G";
230	>	&print_pair(0, "packet.swap.total", $swap_total);
231	>
232	>	$top =~ /Swap:.*, ([^\s]+?)([MG]) Free/;
233	>	my($swap_free) = $1;
234	>	$swap_free*=1024 if $2 eq "G";
235	>	&print_pair(0, "packet.swap.free", $swap_free);
236	>	}
237	>	elsif ($ostype eq "Linux") {
238	>	&print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
239	>	&print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
240	>	&print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
241	>	&print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
242	>	&print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
243	>	&print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
244	>	&print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
245	>	&print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
246	>	&print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
247	>	&print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
248	>
249	>	# The following need to be specified in megabytes.
250	>	# If they are preceeded by a G, then multiply by 1024.
251	>
252	>	$top =~ / ([^\s]+?)([KMG]) av/;
253	>	my($real) = $1;
254	>	$real*=1024 if $2 eq "G";
255	>	$real/=1024 if $2 eq "K";
256	>	&print_pair(0, "packet.memory.total", int($real));
257	>
258	>	$top =~ / ([^\s]+?)([KMG]) free/;
259	>	my($free) = $1;
260	>	$free*=1024 if $2 eq "G";
261	>	$free/=1024 if $2 eq "K";
262	>	&print_pair(0, "packet.memory.free", int($free));
263	>
264	>	$top =~ /Swap:\s+([^\s]+?)([KMG]) av/;
265	>	my($swap_total) = $1;
266	>	$swap_total*=1024 if $2 eq "G";
267	>	$swap_total/=1024 if $2 eq "K";
268	>	&print_pair(0, "packet.swap.total", int($swap_total));
269	>
270	>	$top =~ /Swap:.*, ([^\s]+?)([KMG]) free/;
271	>	my($swap_free) = $1;
272	>	$swap_free*=1024 if $2 eq "G";
273	>	$swap_free/=1024 if $2 eq "K";
274	>	&print_pair(0, "packet.swap.free", int($swap_free));
275	>	}
276	>	else {
277	>	# we could have some catchall here
278	>	# but as it stands this means we'll just skip top stuff
279	>	# for unknown systems
280	>	}
281		}
282
283		# sub to get details of the machine's operating system.
#	Line 185 | Line 300 | sub include_osver() {
300
301		}
302
303	<	# sub to get system uptime.
303	>	# sub to get system uptime in seconds.
304		sub include_uptime() {
305
306	+	# debug stuff, all the different cases
307	+
308	+	# normal
309	+	#my($uptime) = "  4:48pm  up 49 day(s),  6:30,  201 users,  load average: 0.33, 0.35, 0.38\n";
310	+	# 0 days
311	+	#my($uptime) = "  4:48pm  up 6:30,  201 users,  load average: 0.33, 0.35, 0.38\n";
312	+	# 0 hours
313	+	#my($uptime) = "  4:48pm  up 49 day(s),  30 min(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
314	+	# 0 mins
315	+	#my($uptime) = "  4:48pm  up 49 day(s),  6 hr(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
316	+	# 0 days and 0 mins
317	+	#my($uptime) = "  4:48pm  up 6 hr(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
318	+	# 0 days and 0 hours
319	+	#my($uptime) = "  4:48pm  up 30 min(s),  201 users,  load average: 0.33, 0.35, 0.38\n";
320	+	# 0 hours and 0 mins
321	+	#my($uptime) = "  4:48pm  up 49 day(s), 201 users,  load average: 0.33, 0.35, 0.38\n";
322	+
323		# grab the uptime
324		my($uptime) = `$uptimebin`;
325	+
326	+	&print_pair(0, "packet.load.load1", $uptime =~ /load average.?:\s*([^\s]+?),/);
327	+	&print_pair(0, "packet.load.load5", $uptime =~ /load average.?:\s*.+?,\s*([^\s]+?),/);
328	+	&print_pair(0, "packet.load.load15", $uptime =~ /load average.?:\s*.+?,\s*.+?,\s*([^\s]+)/);
329
330		# work out the days, hours, and minutes
331	<	if ($uptime =~ /hr/) {
332	<	# 0 minutes
197	<	$uptime =~ s/up ([0-9]+) .*, ([0-9]+) .*,/$1:$2:0/;
198	<	}
199	<	elsif ($uptime =~ /min/) {
200	<	# 0 hours
201	<	$uptime =~ s/up ([0-9]+) .*, ([0-9]+) .*,/$1:0:$2/;
202	<	}
203	<	elsif ($uptime =~ /day/) {
331	>
332	>	if ($uptime =~ /day.*,\s+([0-9]+):([0-9]+)/) {
333		# normal
334	<	$uptime =~ s/up ([0-9]+) .*, ([0-9]+):([0-9]+)/$1:$2:$3/;
334	>	$uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+):([0-9]+)/;
335	>	$uptime = "$1:$2:$3";
336		}
337		else {
338	<	# 0 days
339	<	$uptime =~ s/up ([0-9]+):([0-9]+)/0:$1:$2/;
338	>	if ($uptime =~ /day/) {
339	>	if ($uptime =~ /hr/) {
340	>	# 0 minutes
341	>	$uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
342	>	$uptime = "$1:$2:0";
343	>	}
344	>	elsif ($uptime =~ /min/) {
345	>	# 0 hours
346	>	$uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
347	>	$uptime = "$1:0:$2";
348	>	}
349	>	else {
350	>	# 0 hours and 0 mins
351	>	$uptime =~ /up\s+([0-9]+)/;
352	>	$uptime = "$1:0:0";
353	>	}
354	>	}
355	>	elsif ($uptime =~ /hr/) {
356	>	# 0 days and 0 minutes
357	>	$uptime =~ /up\s+([0-9]+)\s+/;
358	>	$uptime = "0:$1:0";
359	>	}
360	>	elsif ($uptime =~ /min/) {
361	>	# 0 days and 0 hours
362	>	$uptime =~ /up\s+([0-9]+)\s+/;
363	>	$uptime = "0:0:$1";
364	>	}
365	>	else {
366	>	# 0 days
367	>	$uptime =~ /up\s+([0-9]+):([0-9]+)/;
368	>	$uptime = "0:$1:$2";
369	>	}
370		}
371
372	<	# turn into minutes
213	<
372	>	# turn into seconds
373		$uptime =~ /([0-9]+):([0-9]+):([0-9]+)/;
374	<	$uptime = $3 + ($2 + $1*24)*60;
375	<
374	>	$uptime = ($3+($2+($1*24))*60)*60;
375	>
376	>	# print the value out
377		&print_pair("unknown", "packet.os.uptime", $uptime);
378
379		}

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines