--- projects/cms/source/host/generic/statgrab.pl	2001/02/05 20:27:59	1.31
+++ projects/cms/source/host/generic/statgrab.pl	2001/03/03 21:26:55	1.36
@@ -3,7 +3,7 @@
 #-----------------------------------------------------------------
 # Machine statistics grabber
 #     $Author: tdb $
-#     $Id: statgrab.pl,v 1.31 2001/02/05 20:27:59 tdb Exp $
+#     $Id: statgrab.pl,v 1.36 2001/03/03 21:26:55 tdb Exp $
 #
 # A Perl script to return various information about a host machine
 # by examining the output of some common Unix/Linux commands.
@@ -76,7 +76,7 @@ exit(0);
 # the host should check this when reading data
 # means the host must be checked and updated to work with newer versions.
 sub print_ident() {
-    print 'version statgrab.pl $Revision: 1.31 $';
+    print 'version statgrab.pl $Revision: 1.36 $';
     print "\n";
 }
 
@@ -109,7 +109,7 @@ sub include_disk() {
     my($partition_no) = 0;
     for (my($i) = 0; $i < $#df; $i++) {
         my($line) = $df[$i];
-        $line =~ /^(\/[^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
+        $line =~ /^([^\s]*)\s*([0-9]*)\s*([0-9]*)\s*([0-9]*)\s*[^\s]*\s*(\/[^\s]*)\s*/;
         # $4 will not match unless everything before it does...
         if (defined $5) {
             my ($filesystem, $kbytes, $used, $avail, $mount) = ($1, $2, $3, $4, $5);
@@ -150,42 +150,130 @@ sub include_top() {
     my($top) = join(" ", @top);
     $top =~ s/\n//g;
 
-    &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
-    &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
-    &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
-    &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
-    &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
-    &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
-    &print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
-    &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
-    &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
-    &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
+    if($ostype eq "SunOS") {
+        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
+        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
+        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
+        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
+        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
+        &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
+        &print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
+        &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
+        &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% iowait/);
+        &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
+        
+        # The following need to be specified in megabytes.
+        # If they are preceeded by a G, then multiply by 1024.   
+        
+        $top =~ /([^\s]+?)([MG]) real/;
+        my($real) = $1;
+        $real*=1024 if $2 eq "G";
+        &print_pair(0, "packet.memory.total", $real);
+        
+        $top =~ /([^\s]+?)([MG]) free/;
+        my($free) = $1;
+        $free*=1024 if $2 eq "G";
+        &print_pair(0, "packet.memory.free", $free);
+        
+        $top =~ /([^\s]+?)([MG]) swap in use/;
+        my($swap_in_use) = $1;
+        $swap_in_use*=1024 if $2 eq "G";
+        # DO NOT print this one out... save it for in a moment...
+        
+        $top =~ /([^\s]+?)([MG]) swap free/;
+        my($swap_free) = $1;
+        $swap_free*=1024 if $2 eq "G";
+        &print_pair(0, "packet.swap.free", $swap_free);
+        
+        # AJ requested total swap instead of swap_in_use, so here we go!
+        &print_pair(0, "packet.swap.total", $swap_free + $swap_in_use);
+    }
+    elsif ($ostype eq "FreeBSD") {
+        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
+        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
+        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
+        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
+        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
+        &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
+        &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
+        &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
+        &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
 
-    # The following need to be specified in megabytes.
-    # If they are preceeded by a G, then multiply by 1024.   
-
-    $top =~ /([^\s]+?)([MG]) real/;
-    my($real) = $1;
-    $real*=1024 if $2 eq "G";
-    &print_pair(0, "packet.memory.total", $real);
-
-    $top =~ /([^\s]+?)([MG]) free/;
-    my($free) = $1;
-    $free*=1024 if $2 eq "G";
-    &print_pair(0, "packet.memory.free", $free);
-
-    $top =~ /([^\s]+?)([MG]) swap in use/;
-    my($swap_in_use) = $1;
-    $swap_in_use*=1024 if $2 eq "G";
-    # DO NOT print this one out... save it for in a moment...
-
-    $top =~ /([^\s]+?)([MG]) swap free/;
-    my($swap_free) = $1;
-    $swap_free*=1024 if $2 eq "G";
-    &print_pair(0, "packet.swap.free", $swap_free);
-
-    # AJ requested total swap instead of swap_in_use, so here we go!
-    &print_pair(0, "packet.swap.total", $swap_free + $swap_in_use);
+        # FreeBSD is a bit different, we need to get user and nice.
+        my($user) = 0;
+        if($top =~ /([^\s]+?)% user/) { $user += $1; }
+        if($top =~ /([^\s]+?)% nice/) { $user += $1; }
+        &print_pair(0, "packet.cpu.user", $user);
+        
+        # The following need to be specified in megabytes.
+        # If they are preceeded by a G, then multiply by 1024.   
+        
+        # !! Can't get the total memory !!
+        #$top =~ /([^\s]+?)([MG]) real/;
+        #my($real) = $1;
+        #$real*=1024 if $2 eq "G";
+        #&print_pair(0, "packet.memory.total", $real);
+        &print_pair(0, "packet.memory.total", 0);
+        
+        $top =~ /([^\s]+?)([MG]) Free/;
+        my($free) = $1;
+        $free*=1024 if $2 eq "G";
+        &print_pair(0, "packet.memory.free", $free);
+        
+        $top =~ /Swap: ([^\s]+?)([MG]) Total/;
+        my($swap_total) = $1;
+        $swap_total*=1024 if $2 eq "G";
+        &print_pair(0, "packet.swap.total", $swap_total);
+        
+        $top =~ /Swap:.*, ([^\s]+?)([MG]) Free/;
+        my($swap_free) = $1;
+        $swap_free*=1024 if $2 eq "G";
+        &print_pair(0, "packet.swap.free", $swap_free);
+    }
+    elsif ($ostype eq "Linux") {
+        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
+        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
+        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
+        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
+        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
+        &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
+        &print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
+        &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
+        &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
+        &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
+        
+        # The following need to be specified in megabytes.
+        # If they are preceeded by a G, then multiply by 1024.   
+        
+        $top =~ / ([^\s]+?)([KMG]) av/;
+        my($real) = $1;
+        $real*=1024 if $2 eq "G";
+        $real/=1024 if $2 eq "K";
+        &print_pair(0, "packet.memory.total", int($real));
+        
+        $top =~ / ([^\s]+?)([KMG]) free/;
+        my($free) = $1;
+        $free*=1024 if $2 eq "G";
+        $free/=1024 if $2 eq "K";
+        &print_pair(0, "packet.memory.free", int($free));
+        
+        $top =~ /Swap:\s+([^\s]+?)([KMG]) av/;
+        my($swap_total) = $1;
+        $swap_total*=1024 if $2 eq "G";
+        $swap_total/=1024 if $2 eq "K";
+        &print_pair(0, "packet.swap.total", int($swap_total));
+        
+        $top =~ /Swap:.*, ([^\s]+?)([KMG]) free/;
+        my($swap_free) = $1;
+        $swap_free*=1024 if $2 eq "G";
+        $swap_free/=1024 if $2 eq "K";
+        &print_pair(0, "packet.swap.free", int($swap_free));
+    }
+    else {
+        # we could have some catchall here
+        # but as it stands this means we'll just skip top stuff
+        # for unknown systems
+    }
 }
 
 # sub to get details of the machine's operating system.
@@ -239,19 +327,19 @@ sub include_uptime() {
 
     if ($uptime =~ /day.*,\s+([0-9]+):([0-9]+)/) {
       # normal
-        $uptime =~ /up\s+([0-9]+)\s+.*,\s+([0-9]+):([0-9]+)/;
+        $uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+):([0-9]+)/;
         $uptime = "$1:$2:$3";
     }
     else {
         if ($uptime =~ /day/) {
             if ($uptime =~ /hr/) {
               # 0 minutes
-                $uptime =~ /up\s+([0-9]+)\s+.*,\s+([0-9]+)\s+.*,/;
+                $uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
                 $uptime = "$1:$2:0";
             }
             elsif ($uptime =~ /min/) {
               # 0 hours
-                $uptime =~ /up\s+([0-9]+)\s+.*,\s+([0-9]+)\s+.*,/;
+                $uptime =~ /up\s+([0-9]+)\s+[^\s]+,\s+([0-9]+)\s+[^\s]+,/;
                 $uptime = "$1:0:$2";
             }
             else {