--- projects/cms/source/host/generic/statgrab.pl	2001/03/03 21:26:55	1.36
+++ projects/cms/source/host/generic/statgrab.pl	2001/10/16 10:48:08	1.45
@@ -3,7 +3,7 @@
 #-----------------------------------------------------------------
 # Machine statistics grabber
 #     $Author: tdb $
-#     $Id: statgrab.pl,v 1.36 2001/03/03 21:26:55 tdb Exp $
+#     $Id: statgrab.pl,v 1.45 2001/10/16 10:48:08 tdb Exp $
 #
 # A Perl script to return various information about a host machine
 # by examining the output of some common Unix/Linux commands.
@@ -25,7 +25,8 @@ use strict;
 my($ostype) = `uname -s`; chop($ostype);
 
 # Decide which paths we should use.
-my($topbin); my($dfbin); my($usersbin); my($unamebin); my($uptimebin);
+my($topbin); my($dfbin); my($usersbin);
+my($unamebin); my($uptimebin); my($sysctlbin);
 
 if ($ostype eq "SunOS") {
     # covers: Solaris 8
@@ -37,7 +38,7 @@ if ($ostype eq "SunOS") {
 }
 elsif ($ostype eq "Linux") {
     # covers: Debian r2.2
-    $topbin = "/usr/bin/top -d1 -n0 -b";
+    $topbin = "/usr/bin/top -d1 -n2 -b -p0";
     $dfbin = "/bin/df";
     $usersbin = "/usr/bin/users";
     $unamebin = "/bin/uname";
@@ -50,6 +51,7 @@ elsif ($ostype eq "FreeBSD") {
     $usersbin = "/usr/bin/users";
     $unamebin = "/usr/bin/uname";
     $uptimebin = "/usr/bin/uptime";
+    $sysctlbin = "/sbin/sysctl";
 }
 else {
     print "statgrab.pl Error: Unable to identify system type - \"$ostype\".\n";
@@ -76,7 +78,7 @@ exit(0);
 # the host should check this when reading data
 # means the host must be checked and updated to work with newer versions.
 sub print_ident() {
-    print 'version statgrab.pl $Revision: 1.36 $';
+    print 'version statgrab.pl $Revision: 1.45 $';
     print "\n";
 }
 
@@ -103,7 +105,7 @@ sub print_pair($$$) {
 sub include_disk() {
     
     # Run the df program.
-    my(@df) = `$dfbin -ak`;
+    my(@df) = `$dfbin -akl`;
 
     # Go through each line of the program, looking for each thing we want.
     my($partition_no) = 0;
@@ -148,14 +150,14 @@ sub include_top() {
     # Find out some numbers from top.
     my(@top) = `$topbin`;
     my($top) = join(" ", @top);
-    $top =~ s/\n//g;
+    $top =~ s/\n/ /g;
 
     if($ostype eq "SunOS") {
-        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
-        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
-        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
-        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
-        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*on cpu/);
+        &print_pair(0, "packet.processes.total", $top =~ /([0-9]+?) processes:/);
+        &print_pair(0, "packet.processes.sleeping", $top =~ /([0-9]+?) sleeping/);
+        &print_pair(0, "packet.processes.zombie", $top =~ /([0-9]+?) zombie/);
+        &print_pair(0, "packet.processes.stopped", $top =~ /([0-9]+?) stopped/);
+        &print_pair(0, "packet.processes.cpu", $top =~ /([0-9]+?)\s*on cpu/);
         &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
         &print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
         &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% kernel/);
@@ -165,35 +167,38 @@ sub include_top() {
         # The following need to be specified in megabytes.
         # If they are preceeded by a G, then multiply by 1024.   
         
-        $top =~ /([^\s]+?)([MG]) real/;
+        $top =~ /([0-9]+?)([KMG]) real/;
         my($real) = $1;
         $real*=1024 if $2 eq "G";
+        $real/=1024 if $2 eq "K";
         &print_pair(0, "packet.memory.total", $real);
         
-        $top =~ /([^\s]+?)([MG]) free/;
+        $top =~ /([0-9]+?)([KMG]) free/;
         my($free) = $1;
         $free*=1024 if $2 eq "G";
+        $free/=1024 if $2 eq "K";
         &print_pair(0, "packet.memory.free", $free);
         
-        $top =~ /([^\s]+?)([MG]) swap in use/;
+        $top =~ /([0-9]+?)([KMG]) swap in use/;
         my($swap_in_use) = $1;
         $swap_in_use*=1024 if $2 eq "G";
+        $swap_in_use/=1024 if $2 eq "K";
         # DO NOT print this one out... save it for in a moment...
         
-        $top =~ /([^\s]+?)([MG]) swap free/;
+        $top =~ /([0-9]+?)([KMG]) swap free/;
         my($swap_free) = $1;
         $swap_free*=1024 if $2 eq "G";
+        $swap_free/=1024 if $2 eq "K";
         &print_pair(0, "packet.swap.free", $swap_free);
         
-        # AJ requested total swap instead of swap_in_use, so here we go!
         &print_pair(0, "packet.swap.total", $swap_free + $swap_in_use);
     }
     elsif ($ostype eq "FreeBSD") {
-        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
-        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
-        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
-        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
-        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
+        &print_pair(0, "packet.processes.total", $top =~ /([0-9]+?) processes:/);
+        &print_pair(0, "packet.processes.sleeping", $top =~ /([0-9]+?) sleeping/);
+        &print_pair(0, "packet.processes.zombie", $top =~ /([0-9]+?) zombie/);
+        &print_pair(0, "packet.processes.stopped", $top =~ /([0-9]+?) stopped/);
+        &print_pair(0, "packet.processes.cpu", $top =~ /([0-9]+?)\s*running/);
         &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
         &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
         &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
@@ -208,62 +213,80 @@ sub include_top() {
         # The following need to be specified in megabytes.
         # If they are preceeded by a G, then multiply by 1024.   
         
-        # !! Can't get the total memory !!
-        #$top =~ /([^\s]+?)([MG]) real/;
-        #my($real) = $1;
-        #$real*=1024 if $2 eq "G";
-        #&print_pair(0, "packet.memory.total", $real);
-        &print_pair(0, "packet.memory.total", 0);
+        # get RAM slightly differently
+        my($real) = `$sysctlbin -n hw.physmem`;
+        my($free) = $real - `$sysctlbin -n hw.usermem`;
         
-        $top =~ /([^\s]+?)([MG]) Free/;
-        my($free) = $1;
-        $free*=1024 if $2 eq "G";
+        # turn bytes to megabytes
+        $real = ($real / 1024) / 1024;
+        $free = ($free / 1024) / 1024;
+        
+        &print_pair(0, "packet.memory.total", $real);
         &print_pair(0, "packet.memory.free", $free);
         
-        $top =~ /Swap: ([^\s]+?)([MG]) Total/;
+        $top =~ /Swap: ([0-9]+?)([KMG]) Total/;
         my($swap_total) = $1;
         $swap_total*=1024 if $2 eq "G";
+        $swap_total/=1024 if $2 eq "K";
         &print_pair(0, "packet.swap.total", $swap_total);
         
-        $top =~ /Swap:.*, ([^\s]+?)([MG]) Free/;
+        $top =~ /Swap:.*, ([0-9]+?)([KMG]) Free/;
         my($swap_free) = $1;
         $swap_free*=1024 if $2 eq "G";
+        $swap_free/=1024 if $2 eq "K";
         &print_pair(0, "packet.swap.free", $swap_free);
+        
+        my($loads) = `$sysctlbin -n vm.loadavg`;
+        $loads =~ /\s+([^\s]+?)\s+([^\s]+?)\s+([^\s]+?)\s+/;
+        &print_pair(0, "packet.load.load1", $1);
+        &print_pair(0, "packet.load.load5", $2);
+        &print_pair(0, "packet.load.load15", $3);
     }
     elsif ($ostype eq "Linux") {
-        &print_pair(0, "packet.processes.total", $top =~ /([^\s]+?) processes:/);
-        &print_pair(0, "packet.processes.sleeping", $top =~ / ([^\s]+?) sleeping/);
-        &print_pair(0, "packet.processes.zombie", $top =~ / ([^\s]+?) zombie/);
-        &print_pair(0, "packet.processes.stopped", $top =~ / ([^\s]+?) stopped/);
-        &print_pair(0, "packet.processes.cpu", $top =~ /([^\s]+?)\s*running/);
+        my ($top) = "";
+        foreach my $line (@top) {
+            $top = $line . $top;
+        }
+        $top =~ s/\n/ /g;
+
+        &print_pair(0, "packet.processes.total", $top =~ /([0-9]+?) processes:/);
+        &print_pair(0, "packet.processes.sleeping", $top =~ /([0-9]+?) sleeping/);
+        &print_pair(0, "packet.processes.zombie", $top =~ /([0-9]+?) zombie/);
+        &print_pair(0, "packet.processes.stopped", $top =~ /([0-9]+?) stopped/);
+        &print_pair(0, "packet.processes.cpu", $top =~ /([0-9]+?)\s*running/);
         &print_pair(0, "packet.cpu.idle", $top =~ /([^\s]+?)% idle/);
-        &print_pair(0, "packet.cpu.user", $top =~ /([^\s]+?)% user/);
         &print_pair(0, "packet.cpu.kernel", $top =~ /([^\s]+?)% system/);
         &print_pair(0, "packet.cpu.iowait", $top =~ /([^\s]+?)% interrupt/);
         &print_pair(0, "packet.cpu.swap", $top =~ /([^\s]+?)% swap/);
+
+        # FreeBSD is a bit different, we need to get user and nice.
+        my($user) = 0;
+        if($top =~ /([^\s]+?)% user/) { $user += $1; }
+        if($top =~ /([^\s]+?)% nice/) { $user += $1; }
+        &print_pair(0, "packet.cpu.user", $user);
         
         # The following need to be specified in megabytes.
         # If they are preceeded by a G, then multiply by 1024.   
         
-        $top =~ / ([^\s]+?)([KMG]) av/;
+        $top =~ /Mem:.*?([0-9]+)([KMG])\s+(av|total)/;
         my($real) = $1;
         $real*=1024 if $2 eq "G";
         $real/=1024 if $2 eq "K";
         &print_pair(0, "packet.memory.total", int($real));
         
-        $top =~ / ([^\s]+?)([KMG]) free/;
+        $top =~ /Mem:.*?([0-9]+)([KMG])\s+free/;
         my($free) = $1;
         $free*=1024 if $2 eq "G";
         $free/=1024 if $2 eq "K";
         &print_pair(0, "packet.memory.free", int($free));
         
-        $top =~ /Swap:\s+([^\s]+?)([KMG]) av/;
+        $top =~ /Swap:.*?([0-9]+)([KMG])\s+(av|total)/;
         my($swap_total) = $1;
         $swap_total*=1024 if $2 eq "G";
         $swap_total/=1024 if $2 eq "K";
         &print_pair(0, "packet.swap.total", int($swap_total));
         
-        $top =~ /Swap:.*, ([^\s]+?)([KMG]) free/;
+        $top =~ /Swap:.*?([0-9]+)([KMG])\s+free/;
         my($swap_free) = $1;
         $swap_free*=1024 if $2 eq "G";
         $swap_free/=1024 if $2 eq "K";
@@ -319,9 +342,11 @@ sub include_uptime() {
     # grab the uptime
     my($uptime) = `$uptimebin`;
     
-    &print_pair(0, "packet.load.load1", $uptime =~ /load average.?:\s*([^\s]+?),/);
-    &print_pair(0, "packet.load.load5", $uptime =~ /load average.?:\s*.+?,\s*([^\s]+?),/);
-    &print_pair(0, "packet.load.load15", $uptime =~ /load average.?:\s*.+?,\s*.+?,\s*([^\s]+)/);
+    if($ostype ne "FreeBSD") {
+        &print_pair(0, "packet.load.load1", $uptime =~ /load average.?:\s*([^\s]+?),/);
+        &print_pair(0, "packet.load.load5", $uptime =~ /load average.?:\s*.+?,\s*([^\s]+?),/);
+        &print_pair(0, "packet.load.load15", $uptime =~ /load average.?:\s*.+?,\s*.+?,\s*([^\s]+)/);
+    }
 
     # work out the days, hours, and minutes