host/ihost-perl/ihost.pl

#!/usr/bin/perl -w

# -----------------------------------------------------------
# Perl i-scream Host.
#
# An all-in-one script to act as an i-scream host on
# a typical Unix/Linux box.  You may adapt the data-gathering
# methods as you see fit.
#  - pjm2@ukc.ac.uk
#
# $Author: tdb1 $
# $Id: ihost.pl,v 1.10 2001/02/01 03:17:32 tdb1 Exp $
#------------------------------------------------------------

$| = 1;

use strict;
use IO::Socket;
use Sys::Hostname;

use vars qw (
             $filter_manager_addr
             $filter_manager_port
             $seq_no
             $udp_update_time
             $tcp_update_time
             $last_udp_time
             $last_tcp_time
             $last_modified
             $udp_port
             $tcp_port
             $filter_addr
             $file_list
            );

if (@ARGV != 2) {
    die "Usage: ihost.pl [i-scream filter manager] [TCP port]\n";
}

$filter_manager_addr = $ARGV[0];
$filter_manager_port = $ARGV[1];

$seq_no = 1;

&tcp_configure();
&send_udp_packet();

$last_udp_time = time;
$last_tcp_time = time;
while (1) {
    my($time) = time;
    if ($time >= $last_udp_time + $udp_update_time) {
        &send_udp_packet();
        $last_udp_time = $time;
    }
    if ($time >= $last_tcp_time + $tcp_update_time) {
        &send_tcp_heartbeat();
        $last_tcp_time = $time;
    }
    my($next_udp) = $udp_update_time - $time + $last_udp_time;
    my($next_tcp) = $tcp_update_time - $time + $last_tcp_time;
    my($delay);
    if ($next_udp < $next_tcp) {
        $delay = $next_udp
    }
    else {
        $delay = $next_tcp;
    }
    `sleep $delay`;
}

exit(0);

sub tcp_configure() {
    
    my($sock) = new IO::Socket::INET(
                                     PeerAddr => $filter_manager_addr,
                                     PeerPort => $filter_manager_port,
                                     Proto => 'tcp'
                                    );
    if (!defined $sock) {
        print "IHOST ERROR: Could not connect to $filter_manager_addr:$filter_manager_port.\n";
        print "Please check that there is an i-scream server at this address.\n";
        print "Program ended.\n";
        exit(1);
    }

    # Now run through the configuration process.
    my($response);
    
    print $sock "STARTCONFIG\n";
    $response = <$sock>;
    if (!chop $response eq "OK") {
        print "The i-scream server rejected the STARTCONFIG command.  Terminated.";
        exit(1);
    }

    print "Config started okay.\n";
    
    print $sock "LASTMODIFIED\n";
    $response = <$sock>;
    chop $response;
    $last_modified = $response;
    
    print "Config last modified: ". (scalar localtime $last_modified/1000) . "\n";

    print $sock "FILELIST\n";
    $response = <$sock>;
    chop $response;
    $file_list = $response;

    print "File list obtained: $file_list\n";

    print $sock "UDPUpdateTime\n";
    $response = <$sock>;
    chop $response;
    $udp_update_time = $response;

    print $sock "TCPUpdateTime\n";
    $response = <$sock>;
    chop $response;
    $tcp_update_time = $response;
    
    print "UDP packet period: $udp_update_time seconds.\nTCP heartbeat period: $tcp_update_time seconds.\n";

    print $sock "ENDCONFIG\n";
    $response = <$sock>;
    chomp $response;
    if (!$response eq "OK") {
        print "ENDCONFIG command to server failed.  Terminated.\n";
        exit(1);
    }

    print "Config ended.\n";
    
    print $sock "FILTER\n";
    $response = <$sock>;
    chop $response;
    $response =~ /(.*);(.*);(.*)/;
    ($filter_addr, $udp_port, $tcp_port) = ($1, $2, $3);
    
    print "Got filter data ($filter_addr, $udp_port, $tcp_port)\n";

    print $sock "END\n";
    $response = <$sock>;
    chop $response;
    if ($response eq "OK") {
        print "Host successfully configured via TCP.\n"
    }
    else {
        print "The server failed the host configuration on the END command.";
        exit(1);
    }
    
    close($sock);

    print "Configuration finished sucessfully!\n";
}

sub send_udp_packet() {

    my(@statgrab) = `./statgrab.pl`;
    my(%packet);
    for (my($i) = 0; $i < $#statgrab; $i++) {
        $statgrab[$i] =~ /^([^\s]*) (.*)$/;
        $packet{$1} = $2;
    }
    
    my($date) = time;
    
    my($disk_info) = "<disk>";
    my($i) = 0;
    while (defined $packet{"packet.disk.p$i.attributes.mount"}) {
        $disk_info .= "<p$i>";
        $disk_info .= qq/<name>$packet{"packet.disk.p$i.attributes.name"}<\/name>/;
        $disk_info .= qq/<kbytes>$packet{"packet.disk.p$i.attributes.kbytes"}<\/kbytes>/;
        $disk_info .= qq/<used>$packet{"packet.disk.p$i.attributes.used"}<\/used>/;
        $disk_info .= qq/<avail>$packet{"packet.disk.p$i.attributes.avail"}<\/avail>/;
        $disk_info .= qq/<mount>$packet{"packet.disk.p$i.attributes.mount"}<\/mount>/;
        $disk_info .= "</p$i>";
        ++$i;
    }
    $disk_info .= "</disk>";

    my($hostname) = hostname();
    $hostname =~ s/\..*$//g;
    `cat /etc/resolv.conf` =~ /domain\s+([^\s]+)/;
    my($domainname) = $1;
    my($machine_name) = "$hostname.$domainname";
    my($ip) = inet_ntoa(scalar(gethostbyname($hostname)) || 'localhost');

    # Build the XML packet this way, as we can clearly
    # see the structure and contents... I like this ;-)
    my($xml) = <<EOF;
    
<packet seq_no="$seq_no" machine_name="$machine_name" date="$date" type="data" ip="$ip">
    <load>
        <load1>$packet{"packet.load.load1"}</load1>
        <load5>$packet{"packet.load.load5"}</load5>
        <load15>$packet{"packet.load.load15"}</load15>
    </load>
    <os>
        <name>$packet{"packet.os.name"}</name>
        <release>$packet{"packet.os.release"}</release>
        <platform>$packet{"packet.os.platform"}</platform>
        <sysname>$packet{"packet.os.sysname"}</sysname>
        <version>$packet{"packet.os.version"}</version>
        <uptime>$packet{"packet.os.uptime"}</uptime>
    </os>
    <users>
        <count>$packet{"packet.users.count"}</count>
        <list>$packet{"packet.users.list"}</list>
    </users>
    <processes>
        <total>$packet{"packet.processes.total"}</total>
        <sleeping>$packet{"packet.processes.sleeping"}</sleeping>
        <zombie>$packet{"packet.processes.zombie"}</zombie>
        <stopped>$packet{"packet.processes.stopped"}</stopped>
        <cpu>$packet{"packet.processes.cpu"}</cpu>
    </processes>
    <cpu>
        <idle>$packet{"packet.cpu.idle"}</idle>
        <user>$packet{"packet.cpu.user"}</user>
        <kernel>$packet{"packet.cpu.kernel"}</kernel>
        <iowait>$packet{"packet.cpu.iowait"}</iowait>
        <swap>$packet{"packet.cpu.swap"}</swap>
    </cpu>
    <memory>
        <total>$packet{"packet.memory.real"}</total>
        <free>$packet{"packet.memory.free"}</free>
    </memory>
    <swap>
        <total>$packet{"packet.memory.swap_total"}</total>
        <free>$packet{"packet.memory.swap_free"}</free>
    </swap>
    $disk_info
</packet>

EOF

    $xml =~ s/\n\s*//g;
    
    my($sock) = new IO::Socket::INET (
                                      PeerPort => $udp_port,
                                      PeerAddr => $filter_addr,
                                      Proto => 'udp'
                                     ) or die "Socket: $!\n";

    print $sock $xml or die "Could not send UDP packet: $!\n";
    close($sock);
    $seq_no++;
    print "-";
}

sub send_tcp_heartbeat() {

    my($sock) = new IO::Socket::INET(
                                     PeerAddr => $filter_addr,
                                     PeerPort => $tcp_port,
                                     Proto => 'tcp'
                                    );
    if (!defined $sock) {
        print "IHOST WARNING: Failed to deliver a heartbeat to the i-scream filter.\n";
        return;
    }

    # Now run through the configuration process.
    my($response);

    print $sock "HEARTBEAT\n";
    $response = <$sock>;
    chop $response;
    if (!$response eq "OK") {
        close($sock);
        print "Server gave wrong response to HEARTBEAT: $response\n";
        return;
    }
    
    print $sock "CONFIG\n";
    $response = <$sock>;
    chop $response;
    if (!$response eq "OK") {
        close($sock);
        print "Server gave wrong response to CONFIG: $response\n";
        return;
    }

    print $sock "$file_list\n";
    $response = <$sock>;
    chop $response;
    if (!$response eq "OK") {
        close($sock);
        print "Server gave wrong response to file list: $response\n";
        return;
    }
    
    print $sock "$last_modified\n";
    $response = <$sock>;
    chop $response;
    if ($response eq "ERROR") {
        close($sock);
        &tcp_configure();
        return;
    }
    if (!$response eq "OK") {
        close($sock);
        print "Server gave wrong response to HEARTBEAT: $response\n";
        return;
    }
    
    print $sock "ENDHEARTBEAT\n";
    $response = <$sock>;
    chop $response;
    if (!$response eq "OK") {
        close($sock);
        print "Server gave wrong response to ENDHEARTBEAT: $response\n";
        return;
    }
    
    close($sock);
    print "^";
}
Revision:	1.11
Committed:	Thu Feb 1 09:10:52 2001 UTC (23 years, 8 months ago) by pjm2
Content type:	text/plain
Branch:	MAIN
Changes since 1.10:	+14 -8 lines
Log Message:	If the server 'disappears', then the ihost host will carry on running until it is once again able to deliver TCP heartbeats.
#	Content
1	#!/usr/bin/perl -w
2
3	# -----------------------------------------------------------
4	# Perl i-scream Host.
5	#
6	# An all-in-one script to act as an i-scream host on
7	# a typical Unix/Linux box. You may adapt the data-gathering
8	# methods as you see fit.
9	# - pjm2@ukc.ac.uk
10	#
11	# $Author: tdb1 $
12	# $Id: ihost.pl,v 1.10 2001/02/01 03:17:32 tdb1 Exp $
13	#------------------------------------------------------------
14
15	$\| = 1;
16
17	use strict;
18	use IO::Socket;
19	use Sys::Hostname;
20
21	use vars qw (
22	$filter_manager_addr
23	$filter_manager_port
24	$seq_no
25	$udp_update_time
26	$tcp_update_time
27	$last_udp_time
28	$last_tcp_time
29	$last_modified
30	$udp_port
31	$tcp_port
32	$filter_addr
33	$file_list
34	);
35
36	if (@ARGV != 2) {
37	die "Usage: ihost.pl [i-scream filter manager] [TCP port]\n";
38	}
39
40	$filter_manager_addr = $ARGV[0];
41	$filter_manager_port = $ARGV[1];
42
43	$seq_no = 1;
44
45	&tcp_configure();
46	&send_udp_packet();
47
48	$last_udp_time = time;
49	$last_tcp_time = time;
50	while (1) {
51	my($time) = time;
52	if ($time >= $last_udp_time + $udp_update_time) {
53	&send_udp_packet();
54	$last_udp_time = $time;
55	}
56	if ($time >= $last_tcp_time + $tcp_update_time) {
57	&send_tcp_heartbeat();
58	$last_tcp_time = $time;
59	}
60	my($next_udp) = $udp_update_time - $time + $last_udp_time;
61	my($next_tcp) = $tcp_update_time - $time + $last_tcp_time;
62	my($delay);
63	if ($next_udp < $next_tcp) {
64	$delay = $next_udp
65	}
66	else {
67	$delay = $next_tcp;
68	}
69	`sleep $delay`;
70	}
71
72	exit(0);
73
74	sub tcp_configure() {
75
76	my($sock) = new IO::Socket::INET(
77	PeerAddr => $filter_manager_addr,
78	PeerPort => $filter_manager_port,
79	Proto => 'tcp'
80	);
81	if (!defined $sock) {
82	print "IHOST ERROR: Could not connect to $filter_manager_addr:$filter_manager_port.\n";
83	print "Please check that there is an i-scream server at this address.\n";
84	print "Program ended.\n";
85	exit(1);
86	}
87
88	# Now run through the configuration process.
89	my($response);
90
91	print $sock "STARTCONFIG\n";
92	$response = <$sock>;
93	if (!chop $response eq "OK") {
94	print "The i-scream server rejected the STARTCONFIG command. Terminated.";
95	exit(1);
96	}
97
98	print "Config started okay.\n";
99
100	print $sock "LASTMODIFIED\n";
101	$response = <$sock>;
102	chop $response;
103	$last_modified = $response;
104
105	print "Config last modified: ". (scalar localtime $last_modified/1000) . "\n";
106
107	print $sock "FILELIST\n";
108	$response = <$sock>;
109	chop $response;
110	$file_list = $response;
111
112	print "File list obtained: $file_list\n";
113
114	print $sock "UDPUpdateTime\n";
115	$response = <$sock>;
116	chop $response;
117	$udp_update_time = $response;
118
119	print $sock "TCPUpdateTime\n";
120	$response = <$sock>;
121	chop $response;
122	$tcp_update_time = $response;
123
124	print "UDP packet period: $udp_update_time seconds.\nTCP heartbeat period: $tcp_update_time seconds.\n";
125
126	print $sock "ENDCONFIG\n";
127	$response = <$sock>;
128	chomp $response;
129	if (!$response eq "OK") {
130	print "ENDCONFIG command to server failed. Terminated.\n";
131	exit(1);
132	}
133
134	print "Config ended.\n";
135
136	print $sock "FILTER\n";
137	$response = <$sock>;
138	chop $response;
139	$response =~ /(.);(.);(.*)/;
140	($filter_addr, $udp_port, $tcp_port) = ($1, $2, $3);
141
142	print "Got filter data ($filter_addr, $udp_port, $tcp_port)\n";
143
144	print $sock "END\n";
145	$response = <$sock>;
146	chop $response;
147	if ($response eq "OK") {
148	print "Host successfully configured via TCP.\n"
149	}
150	else {
151	print "The server failed the host configuration on the END command.";
152	exit(1);
153	}
154
155	close($sock);
156
157	print "Configuration finished sucessfully!\n";
158	}
159
160	sub send_udp_packet() {
161
162	my(@statgrab) = `./statgrab.pl`;
163	my(%packet);
164	for (my($i) = 0; $i < $#statgrab; $i++) {
165	$statgrab[$i] =~ /^([^\s]) (.)$/;
166	$packet{$1} = $2;
167	}
168
169	my($date) = time;
170
171	my($disk_info) = "<disk>";
172	my($i) = 0;
173	while (defined $packet{"packet.disk.p$i.attributes.mount"}) {
174	$disk_info .= "<p$i>";
175	$disk_info .= qq/<name>$packet{"packet.disk.p$i.attributes.name"}<\/name>/;
176	$disk_info .= qq/<kbytes>$packet{"packet.disk.p$i.attributes.kbytes"}<\/kbytes>/;
177	$disk_info .= qq/<used>$packet{"packet.disk.p$i.attributes.used"}<\/used>/;
178	$disk_info .= qq/<avail>$packet{"packet.disk.p$i.attributes.avail"}<\/avail>/;
179	$disk_info .= qq/<mount>$packet{"packet.disk.p$i.attributes.mount"}<\/mount>/;
180	$disk_info .= "</p$i>";
181	++$i;
182	}
183	$disk_info .= "</disk>";
184
185	my($hostname) = hostname();
186	$hostname =~ s/\..*$//g;
187	`cat /etc/resolv.conf` =~ /domain\s+([^\s]+)/;
188	my($domainname) = $1;
189	my($machine_name) = "$hostname.$domainname";
190	my($ip) = inet_ntoa(scalar(gethostbyname($hostname)) \|\| 'localhost');
191
192	# Build the XML packet this way, as we can clearly
193	# see the structure and contents... I like this ;-)
194	my($xml) = <<EOF;
195
196	<packet seq_no="$seq_no" machine_name="$machine_name" date="$date" type="data" ip="$ip">
197	<load>
198	<load1>$packet{"packet.load.load1"}</load1>
199	<load5>$packet{"packet.load.load5"}</load5>
200	<load15>$packet{"packet.load.load15"}</load15>
201	</load>
202	<os>
203	<name>$packet{"packet.os.name"}</name>
204	<release>$packet{"packet.os.release"}</release>
205	<platform>$packet{"packet.os.platform"}</platform>
206	<sysname>$packet{"packet.os.sysname"}</sysname>
207	<version>$packet{"packet.os.version"}</version>
208	<uptime>$packet{"packet.os.uptime"}</uptime>
209	</os>
210	<users>
211	<count>$packet{"packet.users.count"}</count>
212	<list>$packet{"packet.users.list"}</list>
213	</users>
214	<processes>
215	<total>$packet{"packet.processes.total"}</total>
216	<sleeping>$packet{"packet.processes.sleeping"}</sleeping>
217	<zombie>$packet{"packet.processes.zombie"}</zombie>
218	<stopped>$packet{"packet.processes.stopped"}</stopped>
219	<cpu>$packet{"packet.processes.cpu"}</cpu>
220	</processes>
221	<cpu>
222	<idle>$packet{"packet.cpu.idle"}</idle>
223	<user>$packet{"packet.cpu.user"}</user>
224	<kernel>$packet{"packet.cpu.kernel"}</kernel>
225	<iowait>$packet{"packet.cpu.iowait"}</iowait>
226	<swap>$packet{"packet.cpu.swap"}</swap>
227	</cpu>
228	<memory>
229	<total>$packet{"packet.memory.real"}</total>
230	<free>$packet{"packet.memory.free"}</free>
231	</memory>
232	<swap>
233	<total>$packet{"packet.memory.swap_total"}</total>
234	<free>$packet{"packet.memory.swap_free"}</free>
235	</swap>
236	$disk_info
237	</packet>
238
239	EOF
240
241	$xml =~ s/\n\s*//g;
242
243	my($sock) = new IO::Socket::INET (
244	PeerPort => $udp_port,
245	PeerAddr => $filter_addr,
246	Proto => 'udp'
247	) or die "Socket: $!\n";
248
249	print $sock $xml or die "Could not send UDP packet: $!\n";
250	close($sock);
251	$seq_no++;
252	print "-";
253	}
254
255	sub send_tcp_heartbeat() {
256
257	my($sock) = new IO::Socket::INET(
258	PeerAddr => $filter_addr,
259	PeerPort => $tcp_port,
260	Proto => 'tcp'
261	);
262	if (!defined $sock) {
263	print "IHOST WARNING: Failed to deliver a heartbeat to the i-scream filter.\n";
264	return;
265	}
266
267	# Now run through the configuration process.
268	my($response);
269
270	print $sock "HEARTBEAT\n";
271	$response = <$sock>;
272	chop $response;
273	if (!$response eq "OK") {
274	close($sock);
275	print "Server gave wrong response to HEARTBEAT: $response\n";
276	return;
277	}
278
279	print $sock "CONFIG\n";
280	$response = <$sock>;
281	chop $response;
282	if (!$response eq "OK") {
283	close($sock);
284	print "Server gave wrong response to CONFIG: $response\n";
285	return;
286	}
287
288	print $sock "$file_list\n";
289	$response = <$sock>;
290	chop $response;
291	if (!$response eq "OK") {
292	close($sock);
293	print "Server gave wrong response to file list: $response\n";
294	return;
295	}
296
297	print $sock "$last_modified\n";
298	$response = <$sock>;
299	chop $response;
300	if ($response eq "ERROR") {
301	close($sock);
302	&tcp_configure();
303	return;
304	}
305	if (!$response eq "OK") {
306	close($sock);
307	print "Server gave wrong response to HEARTBEAT: $response\n";
308	return;
309	}
310
311	print $sock "ENDHEARTBEAT\n";
312	$response = <$sock>;
313	chop $response;
314	if (!$response eq "OK") {
315	close($sock);
316	print "Server gave wrong response to ENDHEARTBEAT: $response\n";
317	return;
318	}
319
320	close($sock);
321	print "^";
322	}