build/etc/system.conf

# This is the default system configuration file
# used by all components of the i-scream system
#
# ALL configuration that uses the centralised
# configuration system has this file as its 
# root of configuration
#
# This is a working sample configuration, which
# aims to provide a working "out of the box"
# setup, aswell as a some example configuration.
#
# $Author: tdb $
# $Id: system.conf,v 1.73 2003/02/28 15:19:09 tdb Exp $
#
# http://www.i-scream.org.uk/
#

############################################################
#### Configuration Files & Groups
############################################################

# All components, such as hosts, will take their configuration
# as given in this file. Unless, that is, they have an extra
# configuration file specified here, or they're in a group
# that has a configuration file. If this is the case the extra
# configuration will override what is given in this file.

# We can define an extra configuration file for any component
# of the system. This is done by specifying the following:
#
# config.component=someconfigfile.conf
#
# Component names will be defined in the documentation for
# the component. An example is that a host component is
# known by the name "Host.hostname" or "Host.ip".
# It is also possible to use the wildcard "*" in a
# hostname or IP address.

# This defines that server.example.com has some extra
# configuration in the file 'server.conf'.
config.Host.server.example.com=exserver.conf

# All webservers are placed in a group named 'www'.
group.www=Host.www1.example.com;Host.www2.example.com
# Then we define some extra config for them.
config.www=webservers.conf

# Our workstations are in their own subnet.
group.workstations=Host.192.168.10.*;
# They can have their own config too.
config.workstations=workstations.conf

# Any hosts not specified by now have the default
# config as given in this file.

# Another component of the system is the mySQL
# database part of the server call the DBInterface.
# This has it's own config so the passwords for the
# mySQL database can be kept seperate.
#config.mySQL=mySQL.conf


############################################################
#### Misc system-wide configuration
############################################################

# The ConfigurationProxy caches configuration for various
# parts of the server. This setting defines how often, in
# seconds, the proxy will check if the data it contains
# is still valid.
ConfigurationProxy.updateTime=60

# The internal Queue's can be monitored. This specifies
# the interval, in seconds, at which their state should
# be monitored.
Queue.MonitorInterval=300
# The maximum size a Queue can be before items are
# dropped when new ones arrive.
Queue.SizeLimit=1000
# And which items we should drop when the queue is full
# and new items arrive. Choices are:
# RANDOM - drop a random item from the queue
# FIRST  - drop the first item from the queue
# LAST   - drop the last item from the queue
# DROP   - drop the new item from the queue
Queue.RemoveAlgorithm=FIRST

# The XMLCache caches data passing through the system.
# This setting specifies the time, in seconds, at which
# the caches contents will be rotated. In real terms
# this means the minimum age at which an XMLPacket can
# be before it is up for deletion from the cache.
XMLCache.cleanupPeriod=30


############################################################
#### FilterManager configuration
############################################################

# The FilterManager accepts connections from hosts
# upon startup. It provides them with configuration
# and details of which filter to talk to. This setting
# specifies which port (TCP) it listens on.
FilterManager.listenPort=4567

# An Access Control List for the FilterManager. One
# might consider something like this:
#
# FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
FilterManager.ACL=DEFAULT:ALLOW


############################################################
#### Filter configuration
############################################################

# A Filter accepts data from hosts on a UDP port. It is
# specified here.
Filter.UDPListenPort=4589

# Filters contain plugins for checking the data passing
# through them. This plugins do the job of "filtering".
# This setting specifies the java package they're
# contained in.
Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
# And the names of the plugins to be loaded.
Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker

# The special filter known as the "Root Filter" needs
# a name within the system.
RootFilter.name=root

# Every Filter, except the root, needs a parent to
# send their data to. This is usually the root filter,
# although in more complex setups it might be another
# filter - giving a tree structure.
Filter.parentFilter=root

# A Filter can accept data through UDP, or from
# an upstream Filter (CORBA). These methods can be
# individually turned of on a filter. The default
# is to have them all on.
# (comment or set to 0 to disable)
Filter.ActivateUDPReader=1
Filter.ActivateCORBAReader=1

# We can also specify Access Control Lists for the
# UDP input of the Filters. One might want something
# restrictive like this:
#
# Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
Filter.UDPACL=DEFAULT:ALLOW

# A Filter plugin called the SourceChecker verifies
# that packets come from permitted hosts. It is
# given an ACL to check the hosts against. A possible
# ACL might be:
#
# Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
Filter.SourceCheckerPluginACL=DEFAULT:ALLOW


############################################################
#### Root filter interfaces configuration
############################################################

# The Root FIlter can send data to various upstream
# data processors. There are two of these at present
# in the server - the DBInterface and the ClientInterface.
# Their component names are given here as defined below.
# (the DBInterface is switched off - commented - by default)
#RootFilter.dbInterfaceName=database
RootFilter.realtimeInterfaceName=realtimeclients


############################################################
#### Client interface configuration
############################################################

# The client interface listens for connections from clients
# on a TCP port. It is specified here.
ClientInterface.listenPort=4510
# The component name for the Client Interface. This should
# match the name specified to the Root Filter above.
ClientInterface.name=realtimeclients

# The Client Interface has two channels, control and data.
# Each of these can have an ACL for allowing connections.
# As per previous examples in this configuration file they
# could be set restrictively, but we'll leave them open
# by default
ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW


############################################################
#### Database interface configuration
############################################################

# The name for the Database Interface. This should match
# the name given to the Root Filter.
DBInterface.name=database


############################################################
#### Host Configuration
############################################################

# A host can use any filter. We'll set the default filter
# for all hosts to be 'filter1'. This can be a list.
Host.filter=filter1;

# Hosts send data every UDPUpdateTime, in seconds.
Host.UDPUpdateTime=60

# How long a hosts config is valid for (a TTL effectively)
# after this time, in seconds, has passed a host should
# consider it's configuration invalid and check for a new
# configuration as soon as it can.
Host.ConfigTTL=3600

# We can run service checks on a host. The java package
# which contains them is specified here.
Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins


############################################################
#### Monitor Configuration
############################################################

# Monitors allow data to be watched for possible problems.
# This setting specifies which java package they're in.
Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
# And which ones should be loaded.
Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
                Heartbeat;Queue;UserCount;WebFeeder;DiskIO;\
                NetIO;Paging;

# Alerts timeout after a given time in seconds and go up
# to the next level. These can be overridden for monitors
# on an individual basis.
Monitor.alertTimeout.NOTICE=60
Monitor.alertTimeout.WARNING=900
Monitor.alertTimeout.CAUTION=1800
Monitor.alertTimeout.CRITICAL=3600

## Threshold values
#
# Here we specify the threshold for each monitor. When
# a threshold is broken an alert is raised. If the
# UPPER threshold is broken the alertTimeout values
# given above are halved to make the alert escalate
# quicker.

# CPU monitor threshold values
Monitor.CPU.threshold.LOWER=90
Monitor.CPU.threshold.UPPER=95

# Load monitor threshold values
Monitor.Load.threshold.LOWER=10.0
Monitor.Load.threshold.UPPER=20.0

# Paging monitor threshold values
Monitor.Paging.threshold.LOWER=1000
Monitor.Paging.threshold.UPPER=5000

# Process Count threshold values
Monitor.Process.threshold.LOWER=500
Monitor.Process.threshold.UPPER=1000

# Memory monitor threshold values
Monitor.Memory.threshold.LOWER=80
Monitor.Memory.threshold.UPPER=90
# Whether to include 'cache' in the 'free' value
# (1 is true, anything else is false)
Monitor.Memory.useCacheAsFree=1

# Swap monitor threshold values
Monitor.Swap.threshold.LOWER=80
Monitor.Swap.threshold.UPPER=90

# UserCount monitor threshold values
Monitor.UserCount.threshold.LOWER=100
Monitor.UserCount.threshold.UPPER=200

# Disk monitor threshold values
Monitor.Disk.threshold.LOWER=90
Monitor.Disk.threshold.UPPER=95
Monitor.DiskInode.threshold.LOWER=90
Monitor.DiskInode.threshold.UPPER=95
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of disk in use
# and VALUE is an absolute value of space free
Monitor.Disk.thresholdMeasure=PERCENTAGE
Monitor.DiskInode.thresholdMeasure=PERCENTAGE

# DiskIO monitor threshold values (in bytes)
Monitor.DiskIO.rbytes.threshold.LOWER=10000000
Monitor.DiskIO.rbytes.threshold.UPPER=50000000
Monitor.DiskIO.wbytes.threshold.LOWER=10000000
Monitor.DiskIO.wbytes.threshold.UPPER=50000000

# NetIO monitor threshold values (in bytes)
Monitor.NetIO.rxbytes.threshold.LOWER=10000000
Monitor.NetIO.rxbytes.threshold.UPPER=50000000
Monitor.NetIO.txbytes.threshold.LOWER=10000000
Monitor.NetIO.txbytes.threshold.UPPER=50000000

# Queue monitor threshold values
Monitor.Queue.threshold.LOWER=50
Monitor.Queue.threshold.UPPER=80
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of the queue in use
# and VALUE is an absolute value of free space
Monitor.Queue.thresholdMeasure=PERCENTAGE

# Services monitor threshold values
# 
# THE SERVICES MONITOR USES A HACK
# WHEREBY IT USES THE SERVICE STATUS
# AS THE THRESHOLD LEVEL. THIS SHOULD
# BE LOOKED AT!
#
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Services.reachFINALcount=5

# Heartbeat threshold values
# these are values in seconds from when the heartbeat
# was *expected* to arrive (ie. last + hearbeat period)
Monitor.Heartbeat.threshold.LOWER=180
Monitor.Heartbeat.threshold.UPPER=300
# this is how often we will run a "check" of heartbeats
Monitor.Heartbeat.checkPeriod=50
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Heartbeat.reachFINALcount=5
# list of hosts we expect to have at startup
# this ensures we notice hosts that aren't running, not
# just those that have gone down recently.
#Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com


############################################################
#### Alerter Configuration
############################################################
# The following variables are understood by ALL alerters
# for messages. They will be substituted for their
# appropriate value.
#
# %level%               - the alert level (eg, WARNING)
# %threshold%           - the threshold broken (eg, LOWER)
# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
# %value%               - the value reached (eg, 95)
# %thresholdValue%      - the value of the threshold broken (eg, 90)
# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
# %timeTillNextAlert%   - the time the next alert will be sent out
# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
# %timeOfFirstAlert%    - the time the first alert was sent
#

# The java package containing the alerters
Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
# And the names of the ones to activate
# You might want to turn them all on, but we only activate
# two basic ones by default.
# Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
Alerter.Plugins=WebFeeder;Logging;

# Configuration for the EMail alerter
# The level alerts have to bypass to be e-mailed out
Alerter.EMail.level = WARNING
# A list of people to send alerts to
Alerter.EMail.destList = me@example.com
# The sender of the e-mail
Alerter.EMail.sender = me@example.com
# The SMTP server to send alerts to
Alerter.EMail.smtpServer = smtp.example.com
# The subject line of the e-mail
Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
# The message in the e-mail
Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.

# Configuration for the IRC alerter
# The level alerts have to bypass to be sent
Alerter.IRC.level = OK
# The IRC server name
Alerter.IRC.IRCServer = irc.example.com
# and it's port
Alerter.IRC.IRCPort = 6667
# A list of nicks to try and be
Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
# Username to be
Alerter.IRC.user = i-scream
# Responses to CTCP prods
Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
# Channel to join
Alerter.IRC.channel = #i-scream
# Message to use when sending an alert
Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
# How long to wait before reconnecting
Alerter.IRC.reconnectDelay = 30
# Notice to send when starting up
Alerter.IRC.startupNotice = i-scream alerting bot activated 
# Commands the bot will recognise
Alerter.IRC.stopCommand = stop alerts
Alerter.IRC.startCommand = start alerts
Alerter.IRC.lastAlertCommand = last alert
Alerter.IRC.joinCommand = join
Alerter.IRC.nickChangeCommand = nick
Alerter.IRC.statCommand = statistics
Alerter.IRC.uptimeCommand = uptime
Alerter.IRC.timeSinceLastAlertCommand = time since last alert
Alerter.IRC.versionCommand = version
Alerter.IRC.helpCommand = help
# Message to send when the bot is addressed and
# doesn't understand the command
Alerter.IRC.rejectMessage = sorry, I don't understand your request

# Configuration for the Logging Alerter
# This alerter writes alerts to the i-scream logfile.
# The level alerts have to bypass to be logged
Alerter.Logging.level = WARNING
# The message to use when logging the alert
Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%


############################################################
#### WebFeeder Configuration
############################################################

# The WebFeeder drops alerts and latest data in to a
# directory for the web interface to use. It is essentially
# the link between the web interface and the server.

# Set these to something to tell the WebFeeder to drop
# latest data, alerts, or both. Comment themt o disable.
WebFeeder.latestActive = true
WebFeeder.alertActive = true

# We can make the WebFeeder only drop alerts that go
# past a certain level. The default is "OK", which makes
# all alerts get passed on.
Alerter.WebFeeder.level = OK

# The WebFeeder cleans out old and stale alerts when it
# performs a check. This setting is the period, in seconds,
# at which a check happens.
WebFeeder.checkPeriod = 120

# Delete alerts older than this, in seconds.
WebFeeder.alertDeleteOlderThan = 300

# Data will be dropped to a subdirectory (specified
# below) of this directory.
WebFeeder.rootPath = /web/i-scream

# SubDir is the directory below rootPath which latest
# data will be placed in. Below that a directory will
# be created with the machine name, and a file named
# FileName (specified here) will be created containg
# the data.
WebFeeder.latestSubDir = latest
WebFeeder.latestFileName = latest_data

# As above, but for the alerts.
WebFeeder.alertSubDir = alert
WebFeeder.alertFileName = alert_data


############################################################
Revision:	1.74
Committed:	Sun Mar 9 21:49:12 2003 UTC (21 years, 8 months ago) by tdb
Branch:	MAIN
Changes since 1.73:	+22 -2 lines
Log Message:	Added support for all the new stuff that ihost provides us with. Ideally this lot needs to be revamped some day, but for now this brings it all back up to date. The biggest change is in the Disk monitor. It wasn't overly neat before, so I've tidied that up, and also added support for inode monitoring. Created the DiskIO, NetIO, and Paging monitors to support new types of data we now handle. The first two sprung from the Disk monitor, whilst the last is pretty normal. Configuration has been updated to support the new monitors, although I don't really have a feel for thresholds for the new types of data.
#	User	Rev	Content
1	tdb	1.2	# This is the default system configuration file
2			# used by all components of the i-scream system
3			#
4			# ALL configuration that uses the centralised
5			# configuration system has this file as its
6			# root of configuration
7			#
8	tdb	1.70	# This is a working sample configuration, which
9			# aims to provide a working "out of the box"
10			# setup, aswell as a some example configuration.
11			#
12	tdb	1.59	# $Author: tdb $
13	tdb	1.74	# $Id: system.conf,v 1.73 2003/02/28 15:19:09 tdb Exp $
14	tdb	1.70	#
15			# http://www.i-scream.org.uk/
16	ajm	1.14	#
17	tdb	1.70
18	ajm	1.14	############################################################
19			#### Configuration Files & Groups
20			############################################################
21
22	tdb	1.70	# All components, such as hosts, will take their configuration
23			# as given in this file. Unless, that is, they have an extra
24			# configuration file specified here, or they're in a group
25			# that has a configuration file. If this is the case the extra
26			# configuration will override what is given in this file.
27
28			# We can define an extra configuration file for any component
29			# of the system. This is done by specifying the following:
30			#
31			# config.component=someconfigfile.conf
32			#
33			# Component names will be defined in the documentation for
34			# the component. An example is that a host component is
35			# known by the name "Host.hostname" or "Host.ip".
36			# It is also possible to use the wildcard "*" in a
37			# hostname or IP address.
38
39			# This defines that server.example.com has some extra
40			# configuration in the file 'server.conf'.
41			config.Host.server.example.com=exserver.conf
42
43			# All webservers are placed in a group named 'www'.
44			group.www=Host.www1.example.com;Host.www2.example.com
45			# Then we define some extra config for them.
46			config.www=webservers.conf
47
48			# Our workstations are in their own subnet.
49			group.workstations=Host.192.168.10.*;
50			# They can have their own config too.
51			config.workstations=workstations.conf
52
53			# Any hosts not specified by now have the default
54			# config as given in this file.
55
56			# Another component of the system is the mySQL
57			# database part of the server call the DBInterface.
58			# This has it's own config so the passwords for the
59			# mySQL database can be kept seperate.
60			#config.mySQL=mySQL.conf
61	tdb	1.15
62	ajm	1.14
63	ajm	1.16	############################################################
64			#### Misc system-wide configuration
65			############################################################
66
67	tdb	1.70	# The ConfigurationProxy caches configuration for various
68			# parts of the server. This setting defines how often, in
69			# seconds, the proxy will check if the data it contains
70			# is still valid.
71	ajm	1.16	ConfigurationProxy.updateTime=60
72
73	tdb	1.70	# The internal Queue's can be monitored. This specifies
74			# the interval, in seconds, at which their state should
75			# be monitored.
76	tdb	1.73	Queue.MonitorInterval=300
77	tdb	1.70	# The maximum size a Queue can be before items are
78			# dropped when new ones arrive.
79	tdb	1.40	Queue.SizeLimit=1000
80	tdb	1.70	# And which items we should drop when the queue is full
81			# and new items arrive. Choices are:
82			# RANDOM - drop a random item from the queue
83			# FIRST - drop the first item from the queue
84			# LAST - drop the last item from the queue
85			# DROP - drop the new item from the queue
86	tdb	1.40	Queue.RemoveAlgorithm=FIRST
87	tdb	1.2
88	tdb	1.70	# The XMLCache caches data passing through the system.
89			# This setting specifies the time, in seconds, at which
90			# the caches contents will be rotated. In real terms
91			# this means the minimum age at which an XMLPacket can
92			# be before it is up for deletion from the cache.
93	tdb	1.68	XMLCache.cleanupPeriod=30
94	ajm	1.14
95	tdb	1.70
96	ajm	1.14	############################################################
97			#### FilterManager configuration
98			############################################################
99	tdb	1.2
100	tdb	1.70	# The FilterManager accepts connections from hosts
101			# upon startup. It provides them with configuration
102			# and details of which filter to talk to. This setting
103			# specifies which port (TCP) it listens on.
104	tdb	1.2	FilterManager.listenPort=4567
105
106	tdb	1.70	# An Access Control List for the FilterManager. One
107			# might consider something like this:
108			#
109			# FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
110			FilterManager.ACL=DEFAULT:ALLOW
111	ajm	1.14
112
113			############################################################
114			#### Filter configuration
115			############################################################
116
117	tdb	1.71	# A Filter accepts data from hosts on a UDP port. It is
118			# specified here.
119	tdb	1.2	Filter.UDPListenPort=4589
120
121	tdb	1.70	# Filters contain plugins for checking the data passing
122			# through them. This plugins do the job of "filtering".
123			# This setting specifies the java package they're
124			# contained in.
125	tdb	1.55	Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
126	tdb	1.70	# And the names of the plugins to be loaded.
127	tdb	1.71	Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker
128	ajm	1.14
129	tdb	1.70	# The special filter known as the "Root Filter" needs
130			# a name within the system.
131	tdb	1.2	RootFilter.name=root
132	ajm	1.14
133	tdb	1.70	# Every Filter, except the root, needs a parent to
134			# send their data to. This is usually the root filter,
135			# although in more complex setups it might be another
136			# filter - giving a tree structure.
137	ajm	1.14	Filter.parentFilter=root
138
139	tdb	1.71	# A Filter can accept data through UDP, or from
140	tdb	1.70	# an upstream Filter (CORBA). These methods can be
141			# individually turned of on a filter. The default
142			# is to have them all on.
143	tdb	1.61	# (comment or set to 0 to disable)
144			Filter.ActivateUDPReader=1
145			Filter.ActivateCORBAReader=1
146	tdb	1.62
147	tdb	1.70	# We can also specify Access Control Lists for the
148	tdb	1.71	# UDP input of the Filters. One might want something
149			# restrictive like this:
150	tdb	1.70	#
151			# Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
152			Filter.UDPACL=DEFAULT:ALLOW
153
154			# A Filter plugin called the SourceChecker verifies
155			# that packets come from permitted hosts. It is
156			# given an ACL to check the hosts against. A possible
157			# ACL might be:
158			#
159			# Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
160			Filter.SourceCheckerPluginACL=DEFAULT:ALLOW
161	tdb	1.65
162	ajm	1.14
163			############################################################
164			#### Root filter interfaces configuration
165			############################################################
166
167	tdb	1.70	# The Root FIlter can send data to various upstream
168			# data processors. There are two of these at present
169			# in the server - the DBInterface and the ClientInterface.
170			# Their component names are given here as defined below.
171			# (the DBInterface is switched off - commented - by default)
172			#RootFilter.dbInterfaceName=database
173	tdb	1.2	RootFilter.realtimeInterfaceName=realtimeclients
174	ajm	1.14
175
176			############################################################
177			#### Client interface configuration
178			############################################################
179
180	tdb	1.70	# The client interface listens for connections from clients
181			# on a TCP port. It is specified here.
182	tdb	1.2	ClientInterface.listenPort=4510
183	tdb	1.70	# The component name for the Client Interface. This should
184			# match the name specified to the Root Filter above.
185	tdb	1.52	ClientInterface.name=realtimeclients
186	tdb	1.63
187	tdb	1.70	# The Client Interface has two channels, control and data.
188			# Each of these can have an ACL for allowing connections.
189			# As per previous examples in this configuration file they
190			# could be set restrictively, but we'll leave them open
191			# by default
192			ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
193			ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW
194	tdb	1.52
195
196			############################################################
197			#### Database interface configuration
198			############################################################
199
200	tdb	1.70	# The name for the Database Interface. This should match
201			# the name given to the Root Filter.
202	tdb	1.52	DBInterface.name=database
203	tdb	1.2
204	ajm	1.14
205			############################################################
206			#### Host Configuration
207			############################################################
208	tdb	1.2
209	tdb	1.70	# A host can use any filter. We'll set the default filter
210			# for all hosts to be 'filter1'. This can be a list.
211			Host.filter=filter1;
212	tdb	1.13
213	tdb	1.71	# Hosts send data every UDPUpdateTime, in seconds.
214	tdb	1.72	Host.UDPUpdateTime=60
215
216			# How long a hosts config is valid for (a TTL effectively)
217			# after this time, in seconds, has passed a host should
218			# consider it's configuration invalid and check for a new
219			# configuration as soon as it can.
220			Host.ConfigTTL=3600
221	tdb	1.2
222	tdb	1.70	# We can run service checks on a host. The java package
223			# which contains them is specified here.
224	tdb	1.55	Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
225	tdb	1.2
226	ajm	1.14
227			############################################################
228			#### Monitor Configuration
229			############################################################
230
231	tdb	1.70	# Monitors allow data to be watched for possible problems.
232			# This setting specifies which java package they're in.
233	tdb	1.55	Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
234	tdb	1.70	# And which ones should be loaded.
235	tdb	1.51	Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
236	tdb	1.74	Heartbeat;Queue;UserCount;WebFeeder;DiskIO;\
237			NetIO;Paging;
238	tdb	1.24
239	tdb	1.70	# Alerts timeout after a given time in seconds and go up
240			# to the next level. These can be overridden for monitors
241			# on an individual basis.
242	tdb	1.47	Monitor.alertTimeout.NOTICE=60
243			Monitor.alertTimeout.WARNING=900
244			Monitor.alertTimeout.CAUTION=1800
245			Monitor.alertTimeout.CRITICAL=3600
246	ajm	1.14
247	tdb	1.47	## Threshold values
248			#
249	tdb	1.70	# Here we specify the threshold for each monitor. When
250			# a threshold is broken an alert is raised. If the
251			# UPPER threshold is broken the alertTimeout values
252			# given above are halved to make the alert escalate
253			# quicker.
254	tdb	1.47
255			# CPU monitor threshold values
256	ajm	1.16	Monitor.CPU.threshold.LOWER=90
257	tdb	1.70	Monitor.CPU.threshold.UPPER=95
258	tdb	1.44
259	tdb	1.47	# Load monitor threshold values
260	tdb	1.44	Monitor.Load.threshold.LOWER=10.0
261			Monitor.Load.threshold.UPPER=20.0
262
263	tdb	1.74	# Paging monitor threshold values
264			Monitor.Paging.threshold.LOWER=1000
265			Monitor.Paging.threshold.UPPER=5000
266
267	tdb	1.47	# Process Count threshold values
268	tdb	1.70	Monitor.Process.threshold.LOWER=500
269			Monitor.Process.threshold.UPPER=1000
270	tdb	1.24
271	tdb	1.47	# Memory monitor threshold values
272	tdb	1.24	Monitor.Memory.threshold.LOWER=80
273			Monitor.Memory.threshold.UPPER=90
274	tdb	1.67	# Whether to include 'cache' in the 'free' value
275			# (1 is true, anything else is false)
276			Monitor.Memory.useCacheAsFree=1
277	tdb	1.24
278	tdb	1.47	# Swap monitor threshold values
279	tdb	1.24	Monitor.Swap.threshold.LOWER=80
280			Monitor.Swap.threshold.UPPER=90
281	tdb	1.50
282			# UserCount monitor threshold values
283			Monitor.UserCount.threshold.LOWER=100
284			Monitor.UserCount.threshold.UPPER=200
285	tdb	1.24
286	tdb	1.47	# Disk monitor threshold values
287	tdb	1.42	Monitor.Disk.threshold.LOWER=90
288			Monitor.Disk.threshold.UPPER=95
289	tdb	1.74	Monitor.DiskInode.threshold.LOWER=90
290			Monitor.DiskInode.threshold.UPPER=95
291	tdb	1.47	# Thresholds given are PERCENTAGE or VALUE
292			# where PERCENTAGE is a percentage of disk in use
293			# and VALUE is an absolute value of space free
294	tdb	1.46	Monitor.Disk.thresholdMeasure=PERCENTAGE
295	tdb	1.74	Monitor.DiskInode.thresholdMeasure=PERCENTAGE
296
297			# DiskIO monitor threshold values (in bytes)
298			Monitor.DiskIO.rbytes.threshold.LOWER=10000000
299			Monitor.DiskIO.rbytes.threshold.UPPER=50000000
300			Monitor.DiskIO.wbytes.threshold.LOWER=10000000
301			Monitor.DiskIO.wbytes.threshold.UPPER=50000000
302
303			# NetIO monitor threshold values (in bytes)
304			Monitor.NetIO.rxbytes.threshold.LOWER=10000000
305			Monitor.NetIO.rxbytes.threshold.UPPER=50000000
306			Monitor.NetIO.txbytes.threshold.LOWER=10000000
307			Monitor.NetIO.txbytes.threshold.UPPER=50000000
308	ajm	1.33
309	tdb	1.56	# Queue monitor threshold values
310	tdb	1.49	Monitor.Queue.threshold.LOWER=50
311			Monitor.Queue.threshold.UPPER=80
312	tdb	1.47	# Thresholds given are PERCENTAGE or VALUE
313	tdb	1.70	# where PERCENTAGE is a percentage of the queue in use
314			# and VALUE is an absolute value of free space
315	tdb	1.46	Monitor.Queue.thresholdMeasure=PERCENTAGE
316
317	tdb	1.47	# Services monitor threshold values
318	ajm	1.34	#
319			# THE SERVICES MONITOR USES A HACK
320			# WHEREBY IT USES THE SERVICE STATUS
321	tdb	1.70	# AS THE THRESHOLD LEVEL. THIS SHOULD
322	ajm	1.34	# BE LOOKED AT!
323			#
324	tdb	1.47	# how many times we should be at the highest level before
325			# we go to a FINAL alert
326	tdb	1.38	Monitor.Services.reachFINALcount=5
327
328	tdb	1.47	# Heartbeat threshold values
329	tdb	1.25	# these are values in seconds from when the heartbeat
330			# was expected to arrive (ie. last + hearbeat period)
331	tdb	1.48	Monitor.Heartbeat.threshold.LOWER=180
332	tdb	1.38	Monitor.Heartbeat.threshold.UPPER=300
333	tdb	1.47	# this is how often we will run a "check" of heartbeats
334	tdb	1.48	Monitor.Heartbeat.checkPeriod=50
335	tdb	1.47	# how many times we should be at the highest level before
336			# we go to a FINAL alert
337			Monitor.Heartbeat.reachFINALcount=5
338	tdb	1.58	# list of hosts we expect to have at startup
339			# this ensures we notice hosts that aren't running, not
340			# just those that have gone down recently.
341	tdb	1.70	#Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com
342	ajm	1.14
343	ajm	1.23
344	ajm	1.14	############################################################
345			#### Alerter Configuration
346			############################################################
347	tdb	1.70	# The following variables are understood by ALL alerters
348			# for messages. They will be substituted for their
349			# appropriate value.
350	ajm	1.23	#
351			# %level% - the alert level (eg, WARNING)
352			# %threshold% - the threshold broken (eg, LOWER)
353			# %source% - the source of the alert (eg, raptor.ukc.ac.uk)
354			# %value% - the value reached (eg, 95)
355			# %thresholdValue% - the value of the threshold broken (eg, 90)
356			# %attributeName% - the attribute that has caused the alert (eg, CPU User)
357			# %timeTillNextAlert% - the time the next alert will be sent out
358			# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
359			# %timeOfFirstAlert% - the time the first alert was sent
360			#
361	ajm	1.14
362	tdb	1.70	# The java package containing the alerters
363	tdb	1.55	Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
364	tdb	1.70	# And the names of the ones to activate
365			# You might want to turn them all on, but we only activate
366			# two basic ones by default.
367			# Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
368			Alerter.Plugins=WebFeeder;Logging;
369	tdb	1.47
370	tdb	1.70	# Configuration for the EMail alerter
371			# The level alerts have to bypass to be e-mailed out
372	tdb	1.38	Alerter.EMail.level = WARNING
373	tdb	1.70	# A list of people to send alerts to
374			Alerter.EMail.destList = me@example.com
375			# The sender of the e-mail
376			Alerter.EMail.sender = me@example.com
377			# The SMTP server to send alerts to
378			Alerter.EMail.smtpServer = smtp.example.com
379			# The subject line of the e-mail
380	ajm	1.16	Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
381	tdb	1.70	# The message in the e-mail
382	tdb	1.38	Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
383
384	tdb	1.70	# Configuration for the IRC alerter
385			# The level alerts have to bypass to be sent
386	ajm	1.16	Alerter.IRC.level = OK
387	tdb	1.70	# The IRC server name
388			Alerter.IRC.IRCServer = irc.example.com
389			# and it's port
390	ajm	1.14	Alerter.IRC.IRCPort = 6667
391	tdb	1.70	# A list of nicks to try and be
392	tdb	1.19	Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
393	tdb	1.70	# Username to be
394	tdb	1.17	Alerter.IRC.user = i-scream
395	tdb	1.70	# Responses to CTCP prods
396	tdb	1.59	Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
397			Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
398	tdb	1.70	# Channel to join
399	ajm	1.14	Alerter.IRC.channel = #i-scream
400	tdb	1.70	# Message to use when sending an alert
401	ajm	1.16	Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
402	tdb	1.70	# How long to wait before reconnecting
403	tdb	1.17	Alerter.IRC.reconnectDelay = 30
404	tdb	1.70	# Notice to send when starting up
405	tdb	1.17	Alerter.IRC.startupNotice = i-scream alerting bot activated
406	tdb	1.70	# Commands the bot will recognise
407	tdb	1.17	Alerter.IRC.stopCommand = stop alerts
408			Alerter.IRC.startCommand = start alerts
409			Alerter.IRC.lastAlertCommand = last alert
410			Alerter.IRC.joinCommand = join
411	tdb	1.18	Alerter.IRC.nickChangeCommand = nick
412			Alerter.IRC.statCommand = statistics
413			Alerter.IRC.uptimeCommand = uptime
414			Alerter.IRC.timeSinceLastAlertCommand = time since last alert
415	tdb	1.19	Alerter.IRC.versionCommand = version
416	tdb	1.17	Alerter.IRC.helpCommand = help
417	tdb	1.70	# Message to send when the bot is addressed and
418			# doesn't understand the command
419	tdb	1.17	Alerter.IRC.rejectMessage = sorry, I don't understand your request
420	tdb	1.54
421	tdb	1.70	# Configuration for the Logging Alerter
422			# This alerter writes alerts to the i-scream logfile.
423			# The level alerts have to bypass to be logged
424	tdb	1.54	Alerter.Logging.level = WARNING
425	tdb	1.70	# The message to use when logging the alert
426	tdb	1.57	Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
427	tdb	1.29
428	tdb	1.47
429	tdb	1.29	############################################################
430			#### WebFeeder Configuration
431			############################################################
432
433	tdb	1.70	# The WebFeeder drops alerts and latest data in to a
434			# directory for the web interface to use. It is essentially
435			# the link between the web interface and the server.
436
437			# Set these to something to tell the WebFeeder to drop
438			# latest data, alerts, or both. Comment themt o disable.
439	tdb	1.32	WebFeeder.latestActive = true
440			WebFeeder.alertActive = true
441	tdb	1.43
442	tdb	1.70	# We can make the WebFeeder only drop alerts that go
443			# past a certain level. The default is "OK", which makes
444			# all alerts get passed on.
445	tdb	1.53	Alerter.WebFeeder.level = OK
446	tdb	1.37
447	tdb	1.70	# The WebFeeder cleans out old and stale alerts when it
448			# performs a check. This setting is the period, in seconds,
449			# at which a check happens.
450	tdb	1.42	WebFeeder.checkPeriod = 120
451	tdb	1.37
452			# Delete alerts older than this, in seconds.
453	tdb	1.42	WebFeeder.alertDeleteOlderThan = 300
454	tdb	1.32
455	tdb	1.70	# Data will be dropped to a subdirectory (specified
456			# below) of this directory.
457			WebFeeder.rootPath = /web/i-scream
458
459			# SubDir is the directory below rootPath which latest
460			# data will be placed in. Below that a directory will
461			# be created with the machine name, and a file named
462			# FileName (specified here) will be created containg
463			# the data.
464	tdb	1.29	WebFeeder.latestSubDir = latest
465	tdb	1.31	WebFeeder.latestFileName = latest_data
466	tdb	1.32
467	tdb	1.70	# As above, but for the alerts.
468	tdb	1.32	WebFeeder.alertSubDir = alert
469			WebFeeder.alertFileName = alert_data
470	ajm	1.16
471	tdb	1.47
472	tdb	1.17	############################################################