build/etc/system.conf

# This is the default system configuration file
# used by all components of the i-scream system
#
# ALL configuration that uses the centralised
# configuration system has this file as its 
# root of configuration
#
# This is a working sample configuration, which
# aims to provide a working "out of the box"
# setup, aswell as a some example configuration.
#
# $Author: tdb $
# $Id: system.conf,v 1.77 2004/08/01 10:40:39 tdb Exp $
#
# http://www.i-scream.org/
#

############################################################
#### Configuration Files & Groups
############################################################

# All components, such as hosts, will take their configuration
# as given in this file. Unless, that is, they have an extra
# configuration file specified here, or they're in a group
# that has a configuration file. If this is the case the extra
# configuration will override what is given in this file.

# We can define an extra configuration file for any component
# of the system. This is done by specifying the following:
#
# config.component=someconfigfile.conf
#
# Component names will be defined in the documentation for
# the component. An example is that a host component is
# known by the name "Host.hostname" or "Host.ip".
# It is also possible to use the wildcard "*" in a
# hostname or IP address.

# This defines that server.example.com has some extra
# configuration in the file 'server.conf'.
config.Host.server.example.com=exserver.conf

# All webservers are placed in a group named 'www'.
group.www=Host.www1.example.com;Host.www2.example.com
# Then we define some extra config for them.
config.www=webservers.conf

# Our workstations are in their own subnet.
group.workstations=Host.192.168.10.*;
# They can have their own config too.
config.workstations=workstations.conf

# Any hosts not specified by now have the default
# config as given in this file.


############################################################
#### Misc system-wide configuration
############################################################

# The ConfigurationProxy caches configuration for various
# parts of the server. This setting defines how often, in
# seconds, the proxy will check if the data it contains
# is still valid.
ConfigurationProxy.updateTime=60

# The internal Queue's can be monitored. This specifies
# the interval, in seconds, at which their state should
# be monitored.
Queue.MonitorInterval=300
# The maximum size a Queue can be before items are
# dropped when new ones arrive.
Queue.SizeLimit=1000
# And which items we should drop when the queue is full
# and new items arrive. Choices are:
# RANDOM - drop a random item from the queue
# FIRST  - drop the first item from the queue
# LAST   - drop the last item from the queue
# DROP   - drop the new item from the queue
Queue.RemoveAlgorithm=FIRST

# The XMLCache caches data passing through the system.
# This setting specifies the time, in seconds, at which
# the caches contents will be rotated. In real terms
# this means the minimum age at which an XMLPacket can
# be before it is up for deletion from the cache.
XMLCache.cleanupPeriod=30


############################################################
#### FilterManager configuration
############################################################

# The FilterManager accepts connections from hosts
# upon startup. It provides them with configuration
# and details of which filter to talk to. This setting
# specifies which port (TCP) it listens on.
FilterManager.listenPort=4567

# An Access Control List for the FilterManager. One
# might consider something like this:
#
# FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
FilterManager.ACL=DEFAULT:ALLOW


############################################################
#### Filter configuration
############################################################

# A Filter accepts data from hosts on a UDP port. It is
# specified here.
Filter.UDPListenPort=4589

# Filters contain plugins for checking the data passing
# through them. This plugins do the job of "filtering".
# This setting specifies the java package they're
# contained in.
Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
# And the names of the plugins to be loaded.
Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker

# Every Filter, except the root, needs a parent to
# send their data to. This is usually the root filter,
# although in more complex setups it might be another
# filter - giving a tree structure.
Filter.parentFilter=root

# A Filter can accept data through UDP, or from
# an upstream Filter (CORBA). These methods can be
# individually turned of on a filter. The default
# is to have them all on.
# (comment or set to 0 to disable)
Filter.ActivateUDPReader=1
Filter.ActivateCORBAReader=1

# We can also specify Access Control Lists for the
# UDP input of the Filters. One might want something
# restrictive like this:
#
# Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
Filter.UDPACL=DEFAULT:ALLOW

# A Filter plugin called the SourceChecker verifies
# that packets come from permitted hosts. It is
# given an ACL to check the hosts against. A possible
# ACL might be:
#
# Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
Filter.SourceCheckerPluginACL=DEFAULT:ALLOW


############################################################
#### Root filter configuration
############################################################

# The special filter known as the "Root Filter" needs
# a name within the system.
RootFilter.name=root


############################################################
#### Client interface configuration
############################################################

# The client interface listens for connections from clients
# on a TCP port. It is specified here.
ClientInterface.listenPort=4510

# The client interface needs to connect to another one to
# receive data. There is a special client interface in the
# root filter which is the top of the tree.
ClientInterface.parent=root

# The Client Interface has two channels, control and data.
# Each of these can have an ACL for allowing connections.
# As per previous examples in this configuration file they
# could be set restrictively, but we'll leave them open
# by default
ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW


############################################################
#### LocalClient Configuration
############################################################

# The parent for the Local Client
Client.parent=clientinterface1


############################################################
#### Host Configuration
############################################################

# A host can use any filter. We'll set the default filter
# for all hosts to be 'filter1'. This can be a list.
Host.filter=filter1;

# Hosts send data every UDPUpdateTime, in seconds.
Host.UDPUpdateTime=60

# How long a hosts config is valid for (a TTL effectively)
# after this time, in seconds, has passed a host should
# consider it's configuration invalid and check for a new
# configuration as soon as it can.
Host.ConfigTTL=3600

# We can run service checks on a host. The java package
# which contains them is specified here.
Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins


############################################################
#### Monitor Configuration
############################################################

# Monitors allow data to be watched for possible problems.
# This setting specifies which java package they're in.
Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
# And which ones should be loaded.
Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
                Heartbeat;Queue;UserCount;WebFeeder;DiskIO;\
                NetIO;Paging;MailQ;

# Alerts timeout after a given time in seconds and go up
# to the next level. These can be overridden for monitors
# on an individual basis.
Monitor.alertTimeout.NOTICE=60
Monitor.alertTimeout.WARNING=900
Monitor.alertTimeout.CAUTION=1800
Monitor.alertTimeout.CRITICAL=3600

# Is monitoring enabled? (comment or set to 0 to disable)
Monitor.enable=1

## Threshold values
#
# Here we specify the threshold for each monitor. When
# a threshold is broken an alert is raised. If the
# UPPER threshold is broken the alertTimeout values
# given above are halved to make the alert escalate
# quicker.

# CPU monitor threshold values
Monitor.CPU.threshold.LOWER=90
Monitor.CPU.threshold.UPPER=95
# enable this monitor (comment or set to 0 to disable)
Monitor.CPU.enable=1

# Load monitor threshold values
Monitor.Load.threshold.LOWER=10.0
Monitor.Load.threshold.UPPER=20.0
# enable this monitor (comment or set to 0 to disable)
Monitor.Load.enable=1

# Paging monitor threshold values
Monitor.Paging.threshold.LOWER=1000
Monitor.Paging.threshold.UPPER=5000
# enable this monitor (comment or set to 0 to disable)
Monitor.Paging.enable=1

# Process Count threshold values
Monitor.Process.threshold.LOWER=500
Monitor.Process.threshold.UPPER=1000
# enable this monitor (comment or set to 0 to disable)
Monitor.Process.enable=1

# Memory monitor threshold values
Monitor.Memory.threshold.LOWER=80
Monitor.Memory.threshold.UPPER=90
# Whether to include 'cache' in the 'free' value
# (1 is true, anything else is false)
Monitor.Memory.useCacheAsFree=1
# enable this monitor (comment or set to 0 to disable)
Monitor.Memory.enable=1

# Swap monitor threshold values
Monitor.Swap.threshold.LOWER=80
Monitor.Swap.threshold.UPPER=90
# enable this monitor (comment or set to 0 to disable)
Monitor.Swap.enable=1

# UserCount monitor threshold values
Monitor.UserCount.threshold.LOWER=100
Monitor.UserCount.threshold.UPPER=200
# enable this monitor (comment or set to 0 to disable)
Monitor.UserCount.enable=1

# Disk monitor threshold values
Monitor.Disk.threshold.LOWER=90
Monitor.Disk.threshold.UPPER=95
Monitor.DiskInode.threshold.LOWER=90
Monitor.DiskInode.threshold.UPPER=95
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of disk in use
# and VALUE is an absolute value of space free
Monitor.Disk.thresholdMeasure=PERCENTAGE
Monitor.DiskInode.thresholdMeasure=PERCENTAGE
# enable this monitor (comment or set to 0 to disable)
Monitor.Disk.enable=1
Monitor.DiskInode.enable=1

# DiskIO monitor threshold values (in bytes)
Monitor.DiskIO.rbytes.threshold.LOWER=10000000
Monitor.DiskIO.rbytes.threshold.UPPER=50000000
Monitor.DiskIO.wbytes.threshold.LOWER=10000000
Monitor.DiskIO.wbytes.threshold.UPPER=50000000
# enable this monitor (comment or set to 0 to disable)
Monitor.DiskIO.enable=1

# NetIO monitor threshold values (in bytes)
Monitor.NetIO.rxbytes.threshold.LOWER=10000000
Monitor.NetIO.rxbytes.threshold.UPPER=50000000
Monitor.NetIO.txbytes.threshold.LOWER=10000000
Monitor.NetIO.txbytes.threshold.UPPER=50000000
# enable this monitor (comment or set to 0 to disable)
Monitor.NetIO.enable=1

# Queue monitor threshold values
Monitor.Queue.threshold.LOWER=50
Monitor.Queue.threshold.UPPER=80
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of the queue in use
# and VALUE is an absolute value of free space
Monitor.Queue.thresholdMeasure=PERCENTAGE
# enable this monitor (comment or set to 0 to disable)
Monitor.Queue.enable=1

# Services monitor threshold values
# 
# THE SERVICES MONITOR USES A HACK
# WHEREBY IT USES THE SERVICE STATUS
# AS THE THRESHOLD LEVEL. THIS SHOULD
# BE LOOKED AT!
#
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Services.reachFINALcount=5

# Heartbeat threshold values
# these are values in seconds from when the heartbeat
# was *expected* to arrive (ie. last + hearbeat period)
Monitor.Heartbeat.threshold.LOWER=180
Monitor.Heartbeat.threshold.UPPER=300
# this is how often we will run a "check" of heartbeats
Monitor.Heartbeat.checkPeriod=50
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Heartbeat.reachFINALcount=5
# list of hosts we expect to have at startup
# this ensures we notice hosts that aren't running, not
# just those that have gone down recently.
#Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com
# enable this monitor (comment or set to 0 to disable)
Monitor.Heartbeat.enable=1

# MailQ monitor threshold values
Monitor.NetIO.size.threshold.LOWER=100
Monitor.NetIO.size.threshold.UPPER=1000
# enable this monitor (comment or set to 0 to disable)
Monitor.NetIO.enable=1


############################################################
#### Alerter Configuration
############################################################
# The following variables are understood by ALL alerters
# for messages. They will be substituted for their
# appropriate value.
#
# %level%               - the alert level (eg, WARNING)
# %threshold%           - the threshold broken (eg, LOWER)
# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
# %value%               - the value reached (eg, 95)
# %thresholdValue%      - the value of the threshold broken (eg, 90)
# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
# %timeTillNextAlert%   - the time the next alert will be sent out
# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
# %timeOfFirstAlert%    - the time the first alert was sent
#

# The java package containing the alerters
Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
# And the names of the ones to activate
# You might want to turn them all on, but we only activate
# two basic ones by default.
# Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
Alerter.Plugins=WebFeeder;Logging;

# Configuration for the EMail alerter
# The level alerts have to bypass to be e-mailed out
Alerter.EMail.level = WARNING
# A list of people to send alerts to
Alerter.EMail.destList = me@example.com
# The sender of the e-mail
Alerter.EMail.sender = me@example.com
# The SMTP server to send alerts to
Alerter.EMail.smtpServer = smtp.example.com
# The subject line of the e-mail
Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
# The message in the e-mail
Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.

# Configuration for the IRC alerter
# The level alerts have to bypass to be sent
Alerter.IRC.level = OK
# The IRC server name
Alerter.IRC.IRCServer = irc.example.com
# and it's port
Alerter.IRC.IRCPort = 6667
# A list of nicks to try and be
Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
# Username to be
Alerter.IRC.user = i-scream
# Responses to CTCP prods
Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
# Channel to join
Alerter.IRC.channel = #i-scream
# Message to use when sending an alert
Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
# How long to wait before reconnecting
Alerter.IRC.reconnectDelay = 30
# Notice to send when starting up
Alerter.IRC.startupNotice = i-scream alerting bot activated 
# Commands the bot will recognise
Alerter.IRC.stopCommand = stop alerts
Alerter.IRC.startCommand = start alerts
Alerter.IRC.lastAlertCommand = last alert
Alerter.IRC.joinCommand = join
Alerter.IRC.nickChangeCommand = nick
Alerter.IRC.statCommand = statistics
Alerter.IRC.uptimeCommand = uptime
Alerter.IRC.timeSinceLastAlertCommand = time since last alert
Alerter.IRC.versionCommand = version
Alerter.IRC.helpCommand = help
# Message to send when the bot is addressed and
# doesn't understand the command
Alerter.IRC.rejectMessage = sorry, I don't understand your request

# Configuration for the Logging Alerter
# This alerter writes alerts to the i-scream logfile.
# The level alerts have to bypass to be logged
Alerter.Logging.level = WARNING
# The message to use when logging the alert
Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%


############################################################
#### WebFeeder Configuration
############################################################

# The WebFeeder drops alerts and latest data in to a
# directory for the web interface to use. It is essentially
# the link between the web interface and the server.

# Set these to something to tell the WebFeeder to drop
# latest data, alerts, or both. Comment themt o disable.
WebFeeder.latestActive = true
WebFeeder.alertActive = true

# We can make the WebFeeder only drop alerts that go
# past a certain level. The default is "OK", which makes
# all alerts get passed on.
Alerter.WebFeeder.level = OK

# The WebFeeder cleans out old and stale alerts when it
# performs a check. This setting is the period, in seconds,
# at which a check happens.
WebFeeder.checkPeriod = 120

# Delete alerts older than this, in seconds.
WebFeeder.alertDeleteOlderThan = 300

# Data will be dropped to a subdirectory (specified
# below) of this directory.
WebFeeder.rootPath = /web/i-scream

# SubDir is the directory below rootPath which latest
# data will be placed in. Below that a directory will
# be created with the machine name, and a file named
# FileName (specified here) will be created containg
# the data.
WebFeeder.latestSubDir = latest
WebFeeder.latestFileName = latest_data

# As above, but for the alerts.
WebFeeder.alertSubDir = alert
WebFeeder.alertFileName = alert_data


############################################################
Revision:	1.78
Committed:	Mon Nov 27 10:51:54 2006 UTC (17 years, 11 months ago) by tdb
Branch:	MAIN
Changes since 1.77:	+8 -2 lines
Log Message:	Add monitor to analyse mail queue sizes.