[ViewVC] Diff of: i-scream/projects/cms/source/server/build/etc/system.conf

Comparing projects/cms/source/server/build/etc/system.conf (file contents):
Revision 1.10 by tdb, Mon Feb 12 01:50:40 2001 UTC vs.
Revision 1.70 by tdb, Sun Feb 23 12:45:21 2003 UTC

+# configuration system has this file as its
+# root of configuration
-+
+# This is a working sample configuration, which
-+
+# aims to provide a working "out of the box"
-+
+# setup, aswell as a some example configuration.
-+
+#
+# $Author$
+# $Id$
-+
+#
-+
+# http://www.i-scream.org.uk/
-+
+#
-<
+# FilterManager configuration
->
+############################################################
->
+#### Configuration Files & Groups
->
+############################################################
-<
+# The default port to listen for new host connections
->
+# All components, such as hosts, will take their configuration
->
+# as given in this file. Unless, that is, they have an extra
->
+# configuration file specified here, or they're in a group
->
+# that has a configuration file. If this is the case the extra
->
+# configuration will override what is given in this file.
->
->
+# We can define an extra configuration file for any component
->
+# of the system. This is done by specifying the following:
->
+#
->
+# config.component=someconfigfile.conf
->
+#
->
+# Component names will be defined in the documentation for
->
+# the component. An example is that a host component is
->
+# known by the name "Host.hostname" or "Host.ip".
->
+# It is also possible to use the wildcard "*" in a
->
+# hostname or IP address.
->
->
+# This defines that server.example.com has some extra
->
+# configuration in the file 'server.conf'.
->
+config.Host.server.example.com=exserver.conf
->
->
+# All webservers are placed in a group named 'www'.
->
+group.www=Host.www1.example.com;Host.www2.example.com
->
+# Then we define some extra config for them.
->
+config.www=webservers.conf
->
->
+# Our workstations are in their own subnet.
->
+group.workstations=Host.192.168.10.*;
->
+# They can have their own config too.
->
+config.workstations=workstations.conf
->
->
+# Any hosts not specified by now have the default
->
+# config as given in this file.
->
->
+# Another component of the system is the mySQL
->
+# database part of the server call the DBInterface.
->
+# This has it's own config so the passwords for the
->
+# mySQL database can be kept seperate.
->
+#config.mySQL=mySQL.conf
->
->
->
+############################################################
->
+#### Misc system-wide configuration
->
+############################################################
->
->
+# The ConfigurationProxy caches configuration for various
->
+# parts of the server. This setting defines how often, in
->
+# seconds, the proxy will check if the data it contains
->
+# is still valid.
->
+ConfigurationProxy.updateTime=60
->
->
+# The internal Queue's can be monitored. This specifies
->
+# the interval, in seconds, at which their state should
->
+# be monitored.
->
+Queue.MonitorInterval=15
->
+# The maximum size a Queue can be before items are
->
+# dropped when new ones arrive.
->
+Queue.SizeLimit=1000
->
+# And which items we should drop when the queue is full
->
+# and new items arrive. Choices are:
->
+# RANDOM - drop a random item from the queue
->
+# FIRST  - drop the first item from the queue
->
+# LAST   - drop the last item from the queue
->
+# DROP   - drop the new item from the queue
->
+Queue.RemoveAlgorithm=FIRST
->
->
+# The XMLCache caches data passing through the system.
->
+# This setting specifies the time, in seconds, at which
->
+# the caches contents will be rotated. In real terms
->
+# this means the minimum age at which an XMLPacket can
->
+# be before it is up for deletion from the cache.
->
+XMLCache.cleanupPeriod=30
->
->
->
+############################################################
->
+#### FilterManager configuration
->
+############################################################
->
->
+# The FilterManager accepts connections from hosts
->
+# upon startup. It provides them with configuration
->
+# and details of which filter to talk to. This setting
->
+# specifies which port (TCP) it listens on.
+FilterManager.listenPort=4567
-<
+# The default port for Filter's to listen on
->
+# An Access Control List for the FilterManager. One
->
+# might consider something like this:
->
+#
->
+# FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
->
+FilterManager.ACL=DEFAULT:ALLOW
->
->
->
+############################################################
->
+#### Filter configuration
->
+############################################################
->
->
+# A Filter accepts data from hosts on both a TCP port
->
+# and a UDP port. They are specified here.
+Filter.UDPListenPort=4589
+Filter.TCPListenPort=4589
-<
+# The name for the root filter
->
+# Filters contain plugins for checking the data passing
->
+# through them. This plugins do the job of "filtering".
->
+# This setting specifies the java package they're
->
+# contained in.
->
+Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
->
+# And the names of the plugins to be loaded.
->
+Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker;KeyChecker
->
->
+# The special filter known as the "Root Filter" needs
->
+# a name within the system.
+RootFilter.name=root
-<
+# Comment either of these (or delete them) and
-<
+# that interface won't be started
->
->
+# Every Filter, except the root, needs a parent to
->
+# send their data to. This is usually the root filter,
->
+# although in more complex setups it might be another
->
+# filter - giving a tree structure.
->
+Filter.parentFilter=root
->
->
+# A Filter can accept data through UDP, TCP, or from
->
+# an upstream Filter (CORBA). These methods can be
->
+# individually turned of on a filter. The default
->
+# is to have them all on.
->
+# (comment or set to 0 to disable)
->
+Filter.ActivateTCPReader=1
->
+Filter.ActivateUDPReader=1
->
+Filter.ActivateCORBAReader=1
->
->
+# We can also specify Access Control Lists for the
->
+# TCP and UDP inputs of the Filters. One might want
->
+# something restrictive like this:
->
+#
->
+# Filter.TCPACL=DEFAULT:DENY;*.example.com:ALLOW
->
+# Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
->
+Filter.TCPACL=DEFAULT:ALLOW
->
+Filter.UDPACL=DEFAULT:ALLOW
->
->
+# A Filter plugin called the SourceChecker verifies
->
+# that packets come from permitted hosts. It is
->
+# given an ACL to check the hosts against. A possible
->
+# ACL might be:
->
+#
->
+# Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
->
+Filter.SourceCheckerPluginACL=DEFAULT:ALLOW
->
->
+# Enforce that hosts use the key based authentication.
->
+# (comment or set to 0 to disable)
->
+Filter.EnforceHostAuth=1
->
->
+# Length of keys to use in authentication.
->
+Filter.KeyLength=15
->
->
->
+############################################################
->
+#### Root filter interfaces configuration
->
+############################################################
->
->
+# The Root FIlter can send data to various upstream
->
+# data processors. There are two of these at present
->
+# in the server - the DBInterface and the ClientInterface.
->
+# Their component names are given here as defined below.
->
+# (the DBInterface is switched off - commented - by default)
->
+#RootFilter.dbInterfaceName=database
+RootFilter.realtimeInterfaceName=realtimeclients
-–
+RootFilter.dbInterfaceName=database
-<
+# The port for the client interface to listen on
->
->
+############################################################
->
+#### Client interface configuration
->
+############################################################
->
->
+# The client interface listens for connections from clients
->
+# on a TCP port. It is specified here.
+ClientInterface.listenPort=4510
-+
+# The component name for the Client Interface. This should
-+
+# match the name specified to the Root Filter above.
-+
+ClientInterface.name=realtimeclients
-<
+# The default parent filter (should almost always be the same as Filter.rootFilter)
-<
+Filter.parentFilter=root
->
+# The Client Interface has two channels, control and data.
->
+# Each of these can have an ACL for allowing connections.
->
+# As per previous examples in this configuration file they
->
+# could be set restrictively, but we'll leave them open
->
+# by default
->
+ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
->
+ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW
-–
+# The default filter for a new host
-–
+Host.filter=filter1
-<
+# The default update times for a new host
->
+############################################################
->
+#### Database interface configuration
->
+############################################################
->
->
+# The name for the Database Interface. This should match
->
+# the name given to the Root Filter.
->
+DBInterface.name=database
->
->
->
+############################################################
->
+#### Host Configuration
->
+############################################################
->
->
+# A host can use any filter. We'll set the default filter
->
+# for all hosts to be 'filter1'. This can be a list.
->
+Host.filter=filter1;
->
->
+# Hosts send data every UDPUpdateTime, in seconds, and then
->
+# perform a heartbeat every TCPUpdateTime, in seconds.
+Host.UDPUpdateTime=10
+Host.TCPUpdateTime=60
-<
+# Plugin Information
-<
+Filter.PluginsPackage=uk.ac.ukc.iscream.filter.plugins
-<
+Filter.Plugins=TypeChecker;EnforceEssentialData
->
+# We can run service checks on a host. The java package
->
+# which contains them is specified here.
->
+Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
-–
+# The services checks to run on a host
-–
+Host.serviceChecksPackage=uk.ac.ukc.iscream.filter.plugins
-–
+Host.serviceChecks=HTTP
-<
+# mySQL Details
-<
+config.mySQL=mySQL.conf
->
+############################################################
->
+#### Monitor Configuration
->
+############################################################
->
->
+# Monitors allow data to be watched for possible problems.
->
+# This setting specifies which java package they're in.
->
+Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
->
+# And which ones should be loaded.
->
+Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
->
+                Heartbeat;Queue;UserCount;WebFeeder;
->
->
+# Alerts timeout after a given time in seconds and go up
->
+# to the next level. These can be overridden for monitors
->
+# on an individual basis.
->
+Monitor.alertTimeout.NOTICE=60
->
+Monitor.alertTimeout.WARNING=900
->
+Monitor.alertTimeout.CAUTION=1800
->
+Monitor.alertTimeout.CRITICAL=3600
->
->
+## Threshold values
->
+#
->
+# Here we specify the threshold for each monitor. When
->
+# a threshold is broken an alert is raised. If the
->
+# UPPER threshold is broken the alertTimeout values
->
+# given above are halved to make the alert escalate
->
+# quicker.
->
->
+# CPU monitor threshold values
->
+Monitor.CPU.threshold.LOWER=90
->
+Monitor.CPU.threshold.UPPER=95
->
->
+# Load monitor threshold values
->
+Monitor.Load.threshold.LOWER=10.0
->
+Monitor.Load.threshold.UPPER=20.0
->
->
+# Process Count threshold values
->
+Monitor.Process.threshold.LOWER=500
->
+Monitor.Process.threshold.UPPER=1000
->
->
+# Memory monitor threshold values
->
+Monitor.Memory.threshold.LOWER=80
->
+Monitor.Memory.threshold.UPPER=90
->
+# Whether to include 'cache' in the 'free' value
->
+# (1 is true, anything else is false)
->
+Monitor.Memory.useCacheAsFree=1
->
->
+# Swap monitor threshold values
->
+Monitor.Swap.threshold.LOWER=80
->
+Monitor.Swap.threshold.UPPER=90
->
->
+# UserCount monitor threshold values
->
+Monitor.UserCount.threshold.LOWER=100
->
+Monitor.UserCount.threshold.UPPER=200
->
->
+# Disk monitor threshold values
->
+Monitor.Disk.threshold.LOWER=90
->
+Monitor.Disk.threshold.UPPER=95
->
+# Thresholds given are PERCENTAGE or VALUE
->
+# where PERCENTAGE is a percentage of disk in use
->
+# and VALUE is an absolute value of space free
->
+Monitor.Disk.thresholdMeasure=PERCENTAGE
->
->
+# Queue monitor threshold values
->
+Monitor.Queue.threshold.LOWER=50
->
+Monitor.Queue.threshold.UPPER=80
->
+# Thresholds given are PERCENTAGE or VALUE
->
+# where PERCENTAGE is a percentage of the queue in use
->
+# and VALUE is an absolute value of free space
->
+Monitor.Queue.thresholdMeasure=PERCENTAGE
->
->
+# Services monitor threshold values
->
+#
->
+# THE SERVICES MONITOR USES A HACK
->
+# WHEREBY IT USES THE SERVICE STATUS
->
+# AS THE THRESHOLD LEVEL. THIS SHOULD
->
+# BE LOOKED AT!
->
+#
->
+# how many times we should be at the highest level before
->
+# we go to a FINAL alert
->
+Monitor.Services.reachFINALcount=5
->
->
+# Heartbeat threshold values
->
+# these are values in seconds from when the heartbeat
->
+# was *expected* to arrive (ie. last + hearbeat period)
->
+Monitor.Heartbeat.threshold.LOWER=180
->
+Monitor.Heartbeat.threshold.UPPER=300
->
+# this is how often we will run a "check" of heartbeats
->
+Monitor.Heartbeat.checkPeriod=50
->
+# how many times we should be at the highest level before
->
+# we go to a FINAL alert
->
+Monitor.Heartbeat.reachFINALcount=5
->
+# list of hosts we expect to have at startup
->
+# this ensures we notice hosts that aren't running, not
->
+# just those that have gone down recently.
->
+#Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com
->
->
->
+############################################################
->
+#### Alerter Configuration
->
+############################################################
->
+# The following variables are understood by ALL alerters
->
+# for messages. They will be substituted for their
->
+# appropriate value.
->
+#
->
+# %level%               - the alert level (eg, WARNING)
->
+# %threshold%           - the threshold broken (eg, LOWER)
->
+# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
->
+# %value%               - the value reached (eg, 95)
->
+# %thresholdValue%      - the value of the threshold broken (eg, 90)
->
+# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
->
+# %timeTillNextAlert%   - the time the next alert will be sent out
->
+# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
->
+# %timeOfFirstAlert%    - the time the first alert was sent
->
+#
->
->
+# The java package containing the alerters
->
+Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
->
+# And the names of the ones to activate
->
+# You might want to turn them all on, but we only activate
->
+# two basic ones by default.
->
+# Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
->
+Alerter.Plugins=WebFeeder;Logging;
->
->
+# Configuration for the EMail alerter
->
+# The level alerts have to bypass to be e-mailed out
->
+Alerter.EMail.level = WARNING
->
+# A list of people to send alerts to
->
+Alerter.EMail.destList = me@example.com
->
+# The sender of the e-mail
->
+Alerter.EMail.sender = me@example.com
->
+# The SMTP server to send alerts to
->
+Alerter.EMail.smtpServer = smtp.example.com
->
+# The subject line of the e-mail
->
+Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
->
+# The message in the e-mail
->
+Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
->
->
+# Configuration for the IRC alerter
->
+# The level alerts have to bypass to be sent
->
+Alerter.IRC.level = OK
->
+# The IRC server name
->
+Alerter.IRC.IRCServer = irc.example.com
->
+# and it's port
->
+Alerter.IRC.IRCPort = 6667
->
+# A list of nicks to try and be
->
+Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
->
+# Username to be
->
+Alerter.IRC.user = i-scream
->
+# Responses to CTCP prods
->
+Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
->
+Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
->
+# Channel to join
->
+Alerter.IRC.channel = #i-scream
->
+# Message to use when sending an alert
->
+Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
->
+# How long to wait before reconnecting
->
+Alerter.IRC.reconnectDelay = 30
->
+# Notice to send when starting up
->
+Alerter.IRC.startupNotice = i-scream alerting bot activated
->
+# Commands the bot will recognise
->
+Alerter.IRC.stopCommand = stop alerts
->
+Alerter.IRC.startCommand = start alerts
->
+Alerter.IRC.lastAlertCommand = last alert
->
+Alerter.IRC.joinCommand = join
->
+Alerter.IRC.nickChangeCommand = nick
->
+Alerter.IRC.statCommand = statistics
->
+Alerter.IRC.uptimeCommand = uptime
->
+Alerter.IRC.timeSinceLastAlertCommand = time since last alert
->
+Alerter.IRC.versionCommand = version
->
+Alerter.IRC.helpCommand = help
->
+# Message to send when the bot is addressed and
->
+# doesn't understand the command
->
+Alerter.IRC.rejectMessage = sorry, I don't understand your request
->
->
+# Configuration for the Logging Alerter
->
+# This alerter writes alerts to the i-scream logfile.
->
+# The level alerts have to bypass to be logged
->
+Alerter.Logging.level = WARNING
->
+# The message to use when logging the alert
->
+Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
->
->
->
+############################################################
->
+#### WebFeeder Configuration
->
+############################################################
->
->
+# The WebFeeder drops alerts and latest data in to a
->
+# directory for the web interface to use. It is essentially
->
+# the link between the web interface and the server.
->
->
+# Set these to something to tell the WebFeeder to drop
->
+# latest data, alerts, or both. Comment themt o disable.
->
+WebFeeder.latestActive = true
->
+WebFeeder.alertActive = true
->
->
+# We can make the WebFeeder only drop alerts that go
->
+# past a certain level. The default is "OK", which makes
->
+# all alerts get passed on.
->
+Alerter.WebFeeder.level = OK
->
->
+# The WebFeeder cleans out old and stale alerts when it
->
+# performs a check. This setting is the period, in seconds,
->
+# at which a check happens.
->
+WebFeeder.checkPeriod = 120
->
->
+# Delete alerts older than this, in seconds.
->
+WebFeeder.alertDeleteOlderThan = 300
->
->
+# Data will be dropped to a subdirectory (specified
->
+# below) of this directory.
->
+WebFeeder.rootPath = /web/i-scream
->
->
+# SubDir is the directory below rootPath which latest
->
+# data will be placed in. Below that a directory will
->
+# be created with the machine name, and a file named
->
+# FileName (specified here) will be created containg
->
+# the data.
->
+WebFeeder.latestSubDir = latest
->
+WebFeeder.latestFileName = latest_data
->
->
+# As above, but for the alerts.
->
+WebFeeder.alertSubDir = alert
->
+WebFeeder.alertFileName = alert_data
->
->
->
+############################################################

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing projects/cms/source/server/build/etc/system.conf (file contents): Revision 1.10 by tdb, Mon Feb 12 01:50:40 2001 UTC vs. Revision 1.70 by tdb, Sun Feb 23 12:45:21 2003 UTC

Diff Legend

Comparing projects/cms/source/server/build/etc/system.conf (file contents):
Revision 1.10 by tdb, Mon Feb 12 01:50:40 2001 UTC vs.
Revision 1.70 by tdb, Sun Feb 23 12:45:21 2003 UTC