[ViewVC] Diff of: i-scream/projects/cms/source/server/build/etc/system.conf

Comparing projects/cms/source/server/build/etc/system.conf (file contents):
Revision 1.13 by tdb, Fri Mar 2 00:25:15 2001 UTC vs.
Revision 1.74 by tdb, Sun Mar 9 21:49:12 2003 UTC

+# configuration system has this file as its
+# root of configuration
-+
+# This is a working sample configuration, which
-+
+# aims to provide a working "out of the box"
-+
+# setup, aswell as a some example configuration.
-+
+#
+# $Author$
+# $Id$
-+
+#
-+
+# http://www.i-scream.org.uk/
-+
+#
-<
+# FilterManager configuration
->
+############################################################
->
+#### Configuration Files & Groups
->
+############################################################
-<
+# The default port to listen for new host connections
->
+# All components, such as hosts, will take their configuration
->
+# as given in this file. Unless, that is, they have an extra
->
+# configuration file specified here, or they're in a group
->
+# that has a configuration file. If this is the case the extra
->
+# configuration will override what is given in this file.
->
->
+# We can define an extra configuration file for any component
->
+# of the system. This is done by specifying the following:
->
+#
->
+# config.component=someconfigfile.conf
->
+#
->
+# Component names will be defined in the documentation for
->
+# the component. An example is that a host component is
->
+# known by the name "Host.hostname" or "Host.ip".
->
+# It is also possible to use the wildcard "*" in a
->
+# hostname or IP address.
->
->
+# This defines that server.example.com has some extra
->
+# configuration in the file 'server.conf'.
->
+config.Host.server.example.com=exserver.conf
->
->
+# All webservers are placed in a group named 'www'.
->
+group.www=Host.www1.example.com;Host.www2.example.com
->
+# Then we define some extra config for them.
->
+config.www=webservers.conf
->
->
+# Our workstations are in their own subnet.
->
+group.workstations=Host.192.168.10.*;
->
+# They can have their own config too.
->
+config.workstations=workstations.conf
->
->
+# Any hosts not specified by now have the default
->
+# config as given in this file.
->
->
+# Another component of the system is the mySQL
->
+# database part of the server call the DBInterface.
->
+# This has it's own config so the passwords for the
->
+# mySQL database can be kept seperate.
->
+#config.mySQL=mySQL.conf
->
->
->
+############################################################
->
+#### Misc system-wide configuration
->
+############################################################
->
->
+# The ConfigurationProxy caches configuration for various
->
+# parts of the server. This setting defines how often, in
->
+# seconds, the proxy will check if the data it contains
->
+# is still valid.
->
+ConfigurationProxy.updateTime=60
->
->
+# The internal Queue's can be monitored. This specifies
->
+# the interval, in seconds, at which their state should
->
+# be monitored.
->
+Queue.MonitorInterval=300
->
+# The maximum size a Queue can be before items are
->
+# dropped when new ones arrive.
->
+Queue.SizeLimit=1000
->
+# And which items we should drop when the queue is full
->
+# and new items arrive. Choices are:
->
+# RANDOM - drop a random item from the queue
->
+# FIRST  - drop the first item from the queue
->
+# LAST   - drop the last item from the queue
->
+# DROP   - drop the new item from the queue
->
+Queue.RemoveAlgorithm=FIRST
->
->
+# The XMLCache caches data passing through the system.
->
+# This setting specifies the time, in seconds, at which
->
+# the caches contents will be rotated. In real terms
->
+# this means the minimum age at which an XMLPacket can
->
+# be before it is up for deletion from the cache.
->
+XMLCache.cleanupPeriod=30
->
->
->
+############################################################
->
+#### FilterManager configuration
->
+############################################################
->
->
+# The FilterManager accepts connections from hosts
->
+# upon startup. It provides them with configuration
->
+# and details of which filter to talk to. This setting
->
+# specifies which port (TCP) it listens on.
+FilterManager.listenPort=4567
-<
+# The default port for Filter's to listen on
->
+# An Access Control List for the FilterManager. One
->
+# might consider something like this:
->
+#
->
+# FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
->
+FilterManager.ACL=DEFAULT:ALLOW
->
->
->
+############################################################
->
+#### Filter configuration
->
+############################################################
->
->
+# A Filter accepts data from hosts on a UDP port. It is
->
+# specified here.
+Filter.UDPListenPort=4589
-–
+Filter.TCPListenPort=4589
-<
+# The name for the root filter
->
+# Filters contain plugins for checking the data passing
->
+# through them. This plugins do the job of "filtering".
->
+# This setting specifies the java package they're
->
+# contained in.
->
+Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
->
+# And the names of the plugins to be loaded.
->
+Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker
->
->
+# The special filter known as the "Root Filter" needs
->
+# a name within the system.
+RootFilter.name=root
-<
+# Comment either of these (or delete them) and
-<
+# that interface won't be started
->
->
+# Every Filter, except the root, needs a parent to
->
+# send their data to. This is usually the root filter,
->
+# although in more complex setups it might be another
->
+# filter - giving a tree structure.
->
+Filter.parentFilter=root
->
->
+# A Filter can accept data through UDP, or from
->
+# an upstream Filter (CORBA). These methods can be
->
+# individually turned of on a filter. The default
->
+# is to have them all on.
->
+# (comment or set to 0 to disable)
->
+Filter.ActivateUDPReader=1
->
+Filter.ActivateCORBAReader=1
->
->
+# We can also specify Access Control Lists for the
->
+# UDP input of the Filters. One might want something
->
+# restrictive like this:
->
+#
->
+# Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
->
+Filter.UDPACL=DEFAULT:ALLOW
->
->
+# A Filter plugin called the SourceChecker verifies
->
+# that packets come from permitted hosts. It is
->
+# given an ACL to check the hosts against. A possible
->
+# ACL might be:
->
+#
->
+# Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
->
+Filter.SourceCheckerPluginACL=DEFAULT:ALLOW
->
->
->
+############################################################
->
+#### Root filter interfaces configuration
->
+############################################################
->
->
+# The Root FIlter can send data to various upstream
->
+# data processors. There are two of these at present
->
+# in the server - the DBInterface and the ClientInterface.
->
+# Their component names are given here as defined below.
->
+# (the DBInterface is switched off - commented - by default)
->
+#RootFilter.dbInterfaceName=database
+RootFilter.realtimeInterfaceName=realtimeclients
-–
+RootFilter.dbInterfaceName=database
-<
+# The port for the client interface to listen on
->
->
+############################################################
->
+#### Client interface configuration
->
+############################################################
->
->
+# The client interface listens for connections from clients
->
+# on a TCP port. It is specified here.
+ClientInterface.listenPort=4510
-+
+# The component name for the Client Interface. This should
-+
+# match the name specified to the Root Filter above.
-+
+ClientInterface.name=realtimeclients
-<
+# The default parent filter (should almost always be the same as Filter.rootFilter)
-<
+Filter.parentFilter=root
->
+# The Client Interface has two channels, control and data.
->
+# Each of these can have an ACL for allowing connections.
->
+# As per previous examples in this configuration file they
->
+# could be set restrictively, but we'll leave them open
->
+# by default
->
+ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
->
+ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW
-–
+# The default filter for a new host
-–
+Host.filter=computingFilter
-<
+config.Host.killigrew.ukc.ac.uk=killigrew.conf
->
+############################################################
->
+#### Database interface configuration
->
+############################################################
-<
+# The default update times for a new host
-<
+Host.UDPUpdateTime=10
-<
+Host.TCPUpdateTime=60
->
+# The name for the Database Interface. This should match
->
+# the name given to the Root Filter.
->
+DBInterface.name=database
-–
+# Plugin Information
-–
+Filter.PluginsPackage=uk.ac.ukc.iscream.filter.plugins
-–
+Filter.Plugins=TypeChecker;EnforceEssentialData
-<
+# The services checks to run on a host
-<
+Host.serviceChecksPackage=uk.ac.ukc.iscream.filter.plugins
-<
+Host.serviceChecks=HTTP;SMTP
->
+############################################################
->
+#### Host Configuration
->
+############################################################
-<
+# mySQL Details
-<
+config.mySQL=mySQL.conf
->
+# A host can use any filter. We'll set the default filter
->
+# for all hosts to be 'filter1'. This can be a list.
->
+Host.filter=filter1;
-<
+# The time interval at which the Queue's should be monitored
-<
+Queue.MonitorInterval=15
->
+# Hosts send data every UDPUpdateTime, in seconds.
->
+Host.UDPUpdateTime=60
-<
+group.rocks=Host.slate.ukc.ac.uk
-<
+config.rocks=rocks.conf
->
+# How long a hosts config is valid for (a TTL effectively)
->
+# after this time, in seconds, has passed a host should
->
+# consider it's configuration invalid and check for a new
->
+# configuration as soon as it can.
->
+Host.ConfigTTL=3600
-+
+# We can run service checks on a host. The java package
-+
+# which contains them is specified here.
-+
+Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
-+
-+
-+
+############################################################
-+
+#### Monitor Configuration
-+
+############################################################
-+
-+
+# Monitors allow data to be watched for possible problems.
-+
+# This setting specifies which java package they're in.
-+
+Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
-+
+# And which ones should be loaded.
-+
+Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
-+
+                Heartbeat;Queue;UserCount;WebFeeder;DiskIO;\
-+
+                NetIO;Paging;
-+
-+
+# Alerts timeout after a given time in seconds and go up
-+
+# to the next level. These can be overridden for monitors
-+
+# on an individual basis.
-+
+Monitor.alertTimeout.NOTICE=60
-+
+Monitor.alertTimeout.WARNING=900
-+
+Monitor.alertTimeout.CAUTION=1800
-+
+Monitor.alertTimeout.CRITICAL=3600
-+
-+
+## Threshold values
-+
+#
-+
+# Here we specify the threshold for each monitor. When
-+
+# a threshold is broken an alert is raised. If the
-+
+# UPPER threshold is broken the alertTimeout values
-+
+# given above are halved to make the alert escalate
-+
+# quicker.
-+
-+
+# CPU monitor threshold values
-+
+Monitor.CPU.threshold.LOWER=90
-+
+Monitor.CPU.threshold.UPPER=95
-+
-+
+# Load monitor threshold values
-+
+Monitor.Load.threshold.LOWER=10.0
-+
+Monitor.Load.threshold.UPPER=20.0
-+
-+
+# Paging monitor threshold values
-+
+Monitor.Paging.threshold.LOWER=1000
-+
+Monitor.Paging.threshold.UPPER=5000
-+
-+
+# Process Count threshold values
-+
+Monitor.Process.threshold.LOWER=500
-+
+Monitor.Process.threshold.UPPER=1000
-+
-+
+# Memory monitor threshold values
-+
+Monitor.Memory.threshold.LOWER=80
-+
+Monitor.Memory.threshold.UPPER=90
-+
+# Whether to include 'cache' in the 'free' value
-+
+# (1 is true, anything else is false)
-+
+Monitor.Memory.useCacheAsFree=1
-+
-+
+# Swap monitor threshold values
-+
+Monitor.Swap.threshold.LOWER=80
-+
+Monitor.Swap.threshold.UPPER=90
-+
-+
+# UserCount monitor threshold values
-+
+Monitor.UserCount.threshold.LOWER=100
-+
+Monitor.UserCount.threshold.UPPER=200
-+
-+
+# Disk monitor threshold values
-+
+Monitor.Disk.threshold.LOWER=90
-+
+Monitor.Disk.threshold.UPPER=95
-+
+Monitor.DiskInode.threshold.LOWER=90
-+
+Monitor.DiskInode.threshold.UPPER=95
-+
+# Thresholds given are PERCENTAGE or VALUE
-+
+# where PERCENTAGE is a percentage of disk in use
-+
+# and VALUE is an absolute value of space free
-+
+Monitor.Disk.thresholdMeasure=PERCENTAGE
-+
+Monitor.DiskInode.thresholdMeasure=PERCENTAGE
-+
-+
+# DiskIO monitor threshold values (in bytes)
-+
+Monitor.DiskIO.rbytes.threshold.LOWER=10000000
-+
+Monitor.DiskIO.rbytes.threshold.UPPER=50000000
-+
+Monitor.DiskIO.wbytes.threshold.LOWER=10000000
-+
+Monitor.DiskIO.wbytes.threshold.UPPER=50000000
-+
-+
+# NetIO monitor threshold values (in bytes)
-+
+Monitor.NetIO.rxbytes.threshold.LOWER=10000000
-+
+Monitor.NetIO.rxbytes.threshold.UPPER=50000000
-+
+Monitor.NetIO.txbytes.threshold.LOWER=10000000
-+
+Monitor.NetIO.txbytes.threshold.UPPER=50000000
-+
-+
+# Queue monitor threshold values
-+
+Monitor.Queue.threshold.LOWER=50
-+
+Monitor.Queue.threshold.UPPER=80
-+
+# Thresholds given are PERCENTAGE or VALUE
-+
+# where PERCENTAGE is a percentage of the queue in use
-+
+# and VALUE is an absolute value of free space
-+
+Monitor.Queue.thresholdMeasure=PERCENTAGE
-+
-+
+# Services monitor threshold values
-+
+#
-+
+# THE SERVICES MONITOR USES A HACK
-+
+# WHEREBY IT USES THE SERVICE STATUS
-+
+# AS THE THRESHOLD LEVEL. THIS SHOULD
-+
+# BE LOOKED AT!
-+
+#
-+
+# how many times we should be at the highest level before
-+
+# we go to a FINAL alert
-+
+Monitor.Services.reachFINALcount=5
-+
-+
+# Heartbeat threshold values
-+
+# these are values in seconds from when the heartbeat
-+
+# was *expected* to arrive (ie. last + hearbeat period)
-+
+Monitor.Heartbeat.threshold.LOWER=180
-+
+Monitor.Heartbeat.threshold.UPPER=300
-+
+# this is how often we will run a "check" of heartbeats
-+
+Monitor.Heartbeat.checkPeriod=50
-+
+# how many times we should be at the highest level before
-+
+# we go to a FINAL alert
-+
+Monitor.Heartbeat.reachFINALcount=5
-+
+# list of hosts we expect to have at startup
-+
+# this ensures we notice hosts that aren't running, not
-+
+# just those that have gone down recently.
-+
+#Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com
-+
-+
-+
+############################################################
-+
+#### Alerter Configuration
-+
+############################################################
-+
+# The following variables are understood by ALL alerters
-+
+# for messages. They will be substituted for their
-+
+# appropriate value.
-+
+#
-+
+# %level%               - the alert level (eg, WARNING)
-+
+# %threshold%           - the threshold broken (eg, LOWER)
-+
+# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
-+
+# %value%               - the value reached (eg, 95)
-+
+# %thresholdValue%      - the value of the threshold broken (eg, 90)
-+
+# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
-+
+# %timeTillNextAlert%   - the time the next alert will be sent out
-+
+# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
-+
+# %timeOfFirstAlert%    - the time the first alert was sent
-+
+#
-+
-+
+# The java package containing the alerters
-+
+Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
-+
+# And the names of the ones to activate
-+
+# You might want to turn them all on, but we only activate
-+
+# two basic ones by default.
-+
+# Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
-+
+Alerter.Plugins=WebFeeder;Logging;
-+
-+
+# Configuration for the EMail alerter
-+
+# The level alerts have to bypass to be e-mailed out
-+
+Alerter.EMail.level = WARNING
-+
+# A list of people to send alerts to
-+
+Alerter.EMail.destList = me@example.com
-+
+# The sender of the e-mail
-+
+Alerter.EMail.sender = me@example.com
-+
+# The SMTP server to send alerts to
-+
+Alerter.EMail.smtpServer = smtp.example.com
-+
+# The subject line of the e-mail
-+
+Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
-+
+# The message in the e-mail
-+
+Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
-+
-+
+# Configuration for the IRC alerter
-+
+# The level alerts have to bypass to be sent
-+
+Alerter.IRC.level = OK
-+
+# The IRC server name
-+
+Alerter.IRC.IRCServer = irc.example.com
-+
+# and it's port
-+
+Alerter.IRC.IRCPort = 6667
-+
+# A list of nicks to try and be
-+
+Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
-+
+# Username to be
-+
+Alerter.IRC.user = i-scream
-+
+# Responses to CTCP prods
-+
+Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
-+
+Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
-+
+# Channel to join
-+
+Alerter.IRC.channel = #i-scream
-+
+# Message to use when sending an alert
-+
+Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
-+
+# How long to wait before reconnecting
-+
+Alerter.IRC.reconnectDelay = 30
-+
+# Notice to send when starting up
-+
+Alerter.IRC.startupNotice = i-scream alerting bot activated
-+
+# Commands the bot will recognise
-+
+Alerter.IRC.stopCommand = stop alerts
-+
+Alerter.IRC.startCommand = start alerts
-+
+Alerter.IRC.lastAlertCommand = last alert
-+
+Alerter.IRC.joinCommand = join
-+
+Alerter.IRC.nickChangeCommand = nick
-+
+Alerter.IRC.statCommand = statistics
-+
+Alerter.IRC.uptimeCommand = uptime
-+
+Alerter.IRC.timeSinceLastAlertCommand = time since last alert
-+
+Alerter.IRC.versionCommand = version
-+
+Alerter.IRC.helpCommand = help
-+
+# Message to send when the bot is addressed and
-+
+# doesn't understand the command
-+
+Alerter.IRC.rejectMessage = sorry, I don't understand your request
-+
-+
+# Configuration for the Logging Alerter
-+
+# This alerter writes alerts to the i-scream logfile.
-+
+# The level alerts have to bypass to be logged
-+
+Alerter.Logging.level = WARNING
-+
+# The message to use when logging the alert
-+
+Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
-+
-+
-+
+############################################################
-+
+#### WebFeeder Configuration
-+
+############################################################
-+
-+
+# The WebFeeder drops alerts and latest data in to a
-+
+# directory for the web interface to use. It is essentially
-+
+# the link between the web interface and the server.
-+
-+
+# Set these to something to tell the WebFeeder to drop
-+
+# latest data, alerts, or both. Comment themt o disable.
-+
+WebFeeder.latestActive = true
-+
+WebFeeder.alertActive = true
-+
-+
+# We can make the WebFeeder only drop alerts that go
-+
+# past a certain level. The default is "OK", which makes
-+
+# all alerts get passed on.
-+
+Alerter.WebFeeder.level = OK
-+
-+
+# The WebFeeder cleans out old and stale alerts when it
-+
+# performs a check. This setting is the period, in seconds,
-+
+# at which a check happens.
-+
+WebFeeder.checkPeriod = 120
-+
-+
+# Delete alerts older than this, in seconds.
-+
+WebFeeder.alertDeleteOlderThan = 300
-+
-+
+# Data will be dropped to a subdirectory (specified
-+
+# below) of this directory.
-+
+WebFeeder.rootPath = /web/i-scream
-+
-+
+# SubDir is the directory below rootPath which latest
-+
+# data will be placed in. Below that a directory will
-+
+# be created with the machine name, and a file named
-+
+# FileName (specified here) will be created containg
-+
+# the data.
-+
+WebFeeder.latestSubDir = latest
-+
+WebFeeder.latestFileName = latest_data
-+
-+
+# As above, but for the alerts.
-+
+WebFeeder.alertSubDir = alert
-+
+WebFeeder.alertFileName = alert_data
-+
-+
-+
+############################################################

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing projects/cms/source/server/build/etc/system.conf (file contents): Revision 1.13 by tdb, Fri Mar 2 00:25:15 2001 UTC vs. Revision 1.74 by tdb, Sun Mar 9 21:49:12 2003 UTC

Diff Legend

Comparing projects/cms/source/server/build/etc/system.conf (file contents):
Revision 1.13 by tdb, Fri Mar 2 00:25:15 2001 UTC vs.
Revision 1.74 by tdb, Sun Mar 9 21:49:12 2003 UTC