ViewVC Help
View File | Revision Log | Show Annotations | Revision Graph | Root Listing
root/i-scream/projects/cms/source/server/build/etc/system.conf
(Generate patch)

Comparing projects/cms/source/server/build/etc/system.conf (file contents):
Revision 1.9 by ajm, Sun Feb 11 22:56:22 2001 UTC vs.
Revision 1.76 by tdb, Thu Jan 15 13:41:46 2004 UTC

# Line 5 | Line 5
5   # configuration system has this file as its
6   # root of configuration
7   #
8 + # This is a working sample configuration, which
9 + # aims to provide a working "out of the box"
10 + # setup, aswell as a some example configuration.
11 + #
12   # $Author$
13   # $Id$
14 + #
15 + # http://www.i-scream.org.uk/
16 + #
17  
18 < # FilterManager configuration
18 > ############################################################
19 > #### Configuration Files & Groups
20 > ############################################################
21  
22 < # The default port to listen for new host connections
22 > # All components, such as hosts, will take their configuration
23 > # as given in this file. Unless, that is, they have an extra
24 > # configuration file specified here, or they're in a group
25 > # that has a configuration file. If this is the case the extra
26 > # configuration will override what is given in this file.
27 >
28 > # We can define an extra configuration file for any component
29 > # of the system. This is done by specifying the following:
30 > #
31 > # config.component=someconfigfile.conf
32 > #
33 > # Component names will be defined in the documentation for
34 > # the component. An example is that a host component is
35 > # known by the name "Host.hostname" or "Host.ip".
36 > # It is also possible to use the wildcard "*" in a
37 > # hostname or IP address.
38 >
39 > # This defines that server.example.com has some extra
40 > # configuration in the file 'server.conf'.
41 > config.Host.server.example.com=exserver.conf
42 >
43 > # All webservers are placed in a group named 'www'.
44 > group.www=Host.www1.example.com;Host.www2.example.com
45 > # Then we define some extra config for them.
46 > config.www=webservers.conf
47 >
48 > # Our workstations are in their own subnet.
49 > group.workstations=Host.192.168.10.*;
50 > # They can have their own config too.
51 > config.workstations=workstations.conf
52 >
53 > # Any hosts not specified by now have the default
54 > # config as given in this file.
55 >
56 >
57 > ############################################################
58 > #### Misc system-wide configuration
59 > ############################################################
60 >
61 > # The ConfigurationProxy caches configuration for various
62 > # parts of the server. This setting defines how often, in
63 > # seconds, the proxy will check if the data it contains
64 > # is still valid.
65 > ConfigurationProxy.updateTime=60
66 >
67 > # The internal Queue's can be monitored. This specifies
68 > # the interval, in seconds, at which their state should
69 > # be monitored.
70 > Queue.MonitorInterval=300
71 > # The maximum size a Queue can be before items are
72 > # dropped when new ones arrive.
73 > Queue.SizeLimit=1000
74 > # And which items we should drop when the queue is full
75 > # and new items arrive. Choices are:
76 > # RANDOM - drop a random item from the queue
77 > # FIRST  - drop the first item from the queue
78 > # LAST   - drop the last item from the queue
79 > # DROP   - drop the new item from the queue
80 > Queue.RemoveAlgorithm=FIRST
81 >
82 > # The XMLCache caches data passing through the system.
83 > # This setting specifies the time, in seconds, at which
84 > # the caches contents will be rotated. In real terms
85 > # this means the minimum age at which an XMLPacket can
86 > # be before it is up for deletion from the cache.
87 > XMLCache.cleanupPeriod=30
88 >
89 >
90 > ############################################################
91 > #### FilterManager configuration
92 > ############################################################
93 >
94 > # The FilterManager accepts connections from hosts
95 > # upon startup. It provides them with configuration
96 > # and details of which filter to talk to. This setting
97 > # specifies which port (TCP) it listens on.
98   FilterManager.listenPort=4567
99  
100 < # The default port for Filter's to listen on
100 > # An Access Control List for the FilterManager. One
101 > # might consider something like this:
102 > #
103 > # FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
104 > FilterManager.ACL=DEFAULT:ALLOW
105 >
106 >
107 > ############################################################
108 > #### Filter configuration
109 > ############################################################
110 >
111 > # A Filter accepts data from hosts on a UDP port. It is
112 > # specified here.
113   Filter.UDPListenPort=4589
18 Filter.TCPListenPort=4589
114  
115 < # The name for the root filter
115 > # Filters contain plugins for checking the data passing
116 > # through them. This plugins do the job of "filtering".
117 > # This setting specifies the java package they're
118 > # contained in.
119 > Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
120 > # And the names of the plugins to be loaded.
121 > Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker
122 >
123 > # Every Filter, except the root, needs a parent to
124 > # send their data to. This is usually the root filter,
125 > # although in more complex setups it might be another
126 > # filter - giving a tree structure.
127 > Filter.parentFilter=root
128 >
129 > # A Filter can accept data through UDP, or from
130 > # an upstream Filter (CORBA). These methods can be
131 > # individually turned of on a filter. The default
132 > # is to have them all on.
133 > # (comment or set to 0 to disable)
134 > Filter.ActivateUDPReader=1
135 > Filter.ActivateCORBAReader=1
136 >
137 > # We can also specify Access Control Lists for the
138 > # UDP input of the Filters. One might want something
139 > # restrictive like this:
140 > #
141 > # Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
142 > Filter.UDPACL=DEFAULT:ALLOW
143 >
144 > # A Filter plugin called the SourceChecker verifies
145 > # that packets come from permitted hosts. It is
146 > # given an ACL to check the hosts against. A possible
147 > # ACL might be:
148 > #
149 > # Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
150 > Filter.SourceCheckerPluginACL=DEFAULT:ALLOW
151 >
152 >
153 > ############################################################
154 > #### Root filter configuration
155 > ############################################################
156 >
157 > # The special filter known as the "Root Filter" needs
158 > # a name within the system.
159   RootFilter.name=root
22 # Comment either of these (or delete them) and
23 # that interface won't be started
24 RootFilter.realtimeInterfaceName=realtimeclients
25 RootFilter.dbInterfaceName=database
160  
161 < # The port for the client interface to listen on
161 >
162 > ############################################################
163 > #### Client interface configuration
164 > ############################################################
165 >
166 > # The client interface listens for connections from clients
167 > # on a TCP port. It is specified here.
168   ClientInterface.listenPort=4510
169  
170 < # The default parent filter (should almost always be the same as Filter.rootFilter)
171 < Filter.parentFilter=root
170 > # The client interface needs to connect to another one to
171 > # receive data. There is a special client interface in the
172 > # root filter which is the top of the tree.
173 > ClientInterface.parent=root
174  
175 < # The default filter for a new host
176 < Host.filter=filter1
175 > # The Client Interface has two channels, control and data.
176 > # Each of these can have an ACL for allowing connections.
177 > # As per previous examples in this configuration file they
178 > # could be set restrictively, but we'll leave them open
179 > # by default
180 > ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
181 > ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW
182  
36 # The default update times for a new host
37 Host.UDPUpdateTime=10
38 Host.TCPUpdateTime=60
183  
184 < # Plugin Information
185 < Filter.PluginsPackage=uk.ac.ukc.iscream.filter.plugins
186 < Filter.Plugins=TypeChecker;EnforceEssentialData
184 > ############################################################
185 > #### LocalClient Configuration
186 > ############################################################
187  
188 < # The services checks to run on a host
189 < Host.serviceChecksPackage=uk.ac.ukc.iscream.filter.plugins
46 < Host.serviceChecks=Test;HTTP
188 > # The parent for the Local Client
189 > Client.parent=clientinterface1
190  
191 < # mySQL Details
192 < config.mySQL=mySQL.conf
191 >
192 > ############################################################
193 > #### Host Configuration
194 > ############################################################
195 >
196 > # A host can use any filter. We'll set the default filter
197 > # for all hosts to be 'filter1'. This can be a list.
198 > Host.filter=filter1;
199 >
200 > # Hosts send data every UDPUpdateTime, in seconds.
201 > Host.UDPUpdateTime=60
202 >
203 > # How long a hosts config is valid for (a TTL effectively)
204 > # after this time, in seconds, has passed a host should
205 > # consider it's configuration invalid and check for a new
206 > # configuration as soon as it can.
207 > Host.ConfigTTL=3600
208 >
209 > # We can run service checks on a host. The java package
210 > # which contains them is specified here.
211 > Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
212 >
213 >
214 > ############################################################
215 > #### Monitor Configuration
216 > ############################################################
217 >
218 > # Monitors allow data to be watched for possible problems.
219 > # This setting specifies which java package they're in.
220 > Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
221 > # And which ones should be loaded.
222 > Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
223 >                Heartbeat;Queue;UserCount;WebFeeder;DiskIO;\
224 >                NetIO;Paging;
225 >
226 > # Alerts timeout after a given time in seconds and go up
227 > # to the next level. These can be overridden for monitors
228 > # on an individual basis.
229 > Monitor.alertTimeout.NOTICE=60
230 > Monitor.alertTimeout.WARNING=900
231 > Monitor.alertTimeout.CAUTION=1800
232 > Monitor.alertTimeout.CRITICAL=3600
233 >
234 > # Is monitoring enabled? (comment or set to 0 to disable)
235 > Monitor.enable=1
236 >
237 > ## Threshold values
238 > #
239 > # Here we specify the threshold for each monitor. When
240 > # a threshold is broken an alert is raised. If the
241 > # UPPER threshold is broken the alertTimeout values
242 > # given above are halved to make the alert escalate
243 > # quicker.
244 >
245 > # CPU monitor threshold values
246 > Monitor.CPU.threshold.LOWER=90
247 > Monitor.CPU.threshold.UPPER=95
248 > # enable this monitor (comment or set to 0 to disable)
249 > Monitor.CPU.enable=1
250 >
251 > # Load monitor threshold values
252 > Monitor.Load.threshold.LOWER=10.0
253 > Monitor.Load.threshold.UPPER=20.0
254 > # enable this monitor (comment or set to 0 to disable)
255 > Monitor.Load.enable=1
256 >
257 > # Paging monitor threshold values
258 > Monitor.Paging.threshold.LOWER=1000
259 > Monitor.Paging.threshold.UPPER=5000
260 > # enable this monitor (comment or set to 0 to disable)
261 > Monitor.Paging.enable=1
262 >
263 > # Process Count threshold values
264 > Monitor.Process.threshold.LOWER=500
265 > Monitor.Process.threshold.UPPER=1000
266 > # enable this monitor (comment or set to 0 to disable)
267 > Monitor.Process.enable=1
268 >
269 > # Memory monitor threshold values
270 > Monitor.Memory.threshold.LOWER=80
271 > Monitor.Memory.threshold.UPPER=90
272 > # Whether to include 'cache' in the 'free' value
273 > # (1 is true, anything else is false)
274 > Monitor.Memory.useCacheAsFree=1
275 > # enable this monitor (comment or set to 0 to disable)
276 > Monitor.Memory.enable=1
277 >
278 > # Swap monitor threshold values
279 > Monitor.Swap.threshold.LOWER=80
280 > Monitor.Swap.threshold.UPPER=90
281 > # enable this monitor (comment or set to 0 to disable)
282 > Monitor.Swap.enable=1
283 >
284 > # UserCount monitor threshold values
285 > Monitor.UserCount.threshold.LOWER=100
286 > Monitor.UserCount.threshold.UPPER=200
287 > # enable this monitor (comment or set to 0 to disable)
288 > Monitor.UserCount.enable=1
289 >
290 > # Disk monitor threshold values
291 > Monitor.Disk.threshold.LOWER=90
292 > Monitor.Disk.threshold.UPPER=95
293 > Monitor.DiskInode.threshold.LOWER=90
294 > Monitor.DiskInode.threshold.UPPER=95
295 > # Thresholds given are PERCENTAGE or VALUE
296 > # where PERCENTAGE is a percentage of disk in use
297 > # and VALUE is an absolute value of space free
298 > Monitor.Disk.thresholdMeasure=PERCENTAGE
299 > Monitor.DiskInode.thresholdMeasure=PERCENTAGE
300 > # enable this monitor (comment or set to 0 to disable)
301 > Monitor.Disk.enable=1
302 > Monitor.DiskInode.enable=1
303 >
304 > # DiskIO monitor threshold values (in bytes)
305 > Monitor.DiskIO.rbytes.threshold.LOWER=10000000
306 > Monitor.DiskIO.rbytes.threshold.UPPER=50000000
307 > Monitor.DiskIO.wbytes.threshold.LOWER=10000000
308 > Monitor.DiskIO.wbytes.threshold.UPPER=50000000
309 > # enable this monitor (comment or set to 0 to disable)
310 > Monitor.DiskIO.enable=1
311 >
312 > # NetIO monitor threshold values (in bytes)
313 > Monitor.NetIO.rxbytes.threshold.LOWER=10000000
314 > Monitor.NetIO.rxbytes.threshold.UPPER=50000000
315 > Monitor.NetIO.txbytes.threshold.LOWER=10000000
316 > Monitor.NetIO.txbytes.threshold.UPPER=50000000
317 > # enable this monitor (comment or set to 0 to disable)
318 > Monitor.NetIO.enable=1
319 >
320 > # Queue monitor threshold values
321 > Monitor.Queue.threshold.LOWER=50
322 > Monitor.Queue.threshold.UPPER=80
323 > # Thresholds given are PERCENTAGE or VALUE
324 > # where PERCENTAGE is a percentage of the queue in use
325 > # and VALUE is an absolute value of free space
326 > Monitor.Queue.thresholdMeasure=PERCENTAGE
327 > # enable this monitor (comment or set to 0 to disable)
328 > Monitor.Queue.enable=1
329 >
330 > # Services monitor threshold values
331 > #
332 > # THE SERVICES MONITOR USES A HACK
333 > # WHEREBY IT USES THE SERVICE STATUS
334 > # AS THE THRESHOLD LEVEL. THIS SHOULD
335 > # BE LOOKED AT!
336 > #
337 > # how many times we should be at the highest level before
338 > # we go to a FINAL alert
339 > Monitor.Services.reachFINALcount=5
340 >
341 > # Heartbeat threshold values
342 > # these are values in seconds from when the heartbeat
343 > # was *expected* to arrive (ie. last + hearbeat period)
344 > Monitor.Heartbeat.threshold.LOWER=180
345 > Monitor.Heartbeat.threshold.UPPER=300
346 > # this is how often we will run a "check" of heartbeats
347 > Monitor.Heartbeat.checkPeriod=50
348 > # how many times we should be at the highest level before
349 > # we go to a FINAL alert
350 > Monitor.Heartbeat.reachFINALcount=5
351 > # list of hosts we expect to have at startup
352 > # this ensures we notice hosts that aren't running, not
353 > # just those that have gone down recently.
354 > #Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com
355 > # enable this monitor (comment or set to 0 to disable)
356 > Monitor.Heartbeat.enable=1
357 >
358 >
359 > ############################################################
360 > #### Alerter Configuration
361 > ############################################################
362 > # The following variables are understood by ALL alerters
363 > # for messages. They will be substituted for their
364 > # appropriate value.
365 > #
366 > # %level%               - the alert level (eg, WARNING)
367 > # %threshold%           - the threshold broken (eg, LOWER)
368 > # %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
369 > # %value%               - the value reached (eg, 95)
370 > # %thresholdValue%      - the value of the threshold broken (eg, 90)
371 > # %attributeName%       - the attribute that has caused the alert (eg, CPU User)
372 > # %timeTillNextAlert%   - the time the next alert will be sent out
373 > # %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
374 > # %timeOfFirstAlert%    - the time the first alert was sent
375 > #
376 >
377 > # The java package containing the alerters
378 > Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
379 > # And the names of the ones to activate
380 > # You might want to turn them all on, but we only activate
381 > # two basic ones by default.
382 > # Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
383 > Alerter.Plugins=WebFeeder;Logging;
384 >
385 > # Configuration for the EMail alerter
386 > # The level alerts have to bypass to be e-mailed out
387 > Alerter.EMail.level = WARNING
388 > # A list of people to send alerts to
389 > Alerter.EMail.destList = me@example.com
390 > # The sender of the e-mail
391 > Alerter.EMail.sender = me@example.com
392 > # The SMTP server to send alerts to
393 > Alerter.EMail.smtpServer = smtp.example.com
394 > # The subject line of the e-mail
395 > Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
396 > # The message in the e-mail
397 > Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
398 >
399 > # Configuration for the IRC alerter
400 > # The level alerts have to bypass to be sent
401 > Alerter.IRC.level = OK
402 > # The IRC server name
403 > Alerter.IRC.IRCServer = irc.example.com
404 > # and it's port
405 > Alerter.IRC.IRCPort = 6667
406 > # A list of nicks to try and be
407 > Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
408 > # Username to be
409 > Alerter.IRC.user = i-scream
410 > # Responses to CTCP prods
411 > Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
412 > Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
413 > # Channel to join
414 > Alerter.IRC.channel = #i-scream
415 > # Message to use when sending an alert
416 > Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
417 > # How long to wait before reconnecting
418 > Alerter.IRC.reconnectDelay = 30
419 > # Notice to send when starting up
420 > Alerter.IRC.startupNotice = i-scream alerting bot activated
421 > # Commands the bot will recognise
422 > Alerter.IRC.stopCommand = stop alerts
423 > Alerter.IRC.startCommand = start alerts
424 > Alerter.IRC.lastAlertCommand = last alert
425 > Alerter.IRC.joinCommand = join
426 > Alerter.IRC.nickChangeCommand = nick
427 > Alerter.IRC.statCommand = statistics
428 > Alerter.IRC.uptimeCommand = uptime
429 > Alerter.IRC.timeSinceLastAlertCommand = time since last alert
430 > Alerter.IRC.versionCommand = version
431 > Alerter.IRC.helpCommand = help
432 > # Message to send when the bot is addressed and
433 > # doesn't understand the command
434 > Alerter.IRC.rejectMessage = sorry, I don't understand your request
435 >
436 > # Configuration for the Logging Alerter
437 > # This alerter writes alerts to the i-scream logfile.
438 > # The level alerts have to bypass to be logged
439 > Alerter.Logging.level = WARNING
440 > # The message to use when logging the alert
441 > Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
442 >
443 >
444 > ############################################################
445 > #### WebFeeder Configuration
446 > ############################################################
447 >
448 > # The WebFeeder drops alerts and latest data in to a
449 > # directory for the web interface to use. It is essentially
450 > # the link between the web interface and the server.
451 >
452 > # Set these to something to tell the WebFeeder to drop
453 > # latest data, alerts, or both. Comment themt o disable.
454 > WebFeeder.latestActive = true
455 > WebFeeder.alertActive = true
456 >
457 > # We can make the WebFeeder only drop alerts that go
458 > # past a certain level. The default is "OK", which makes
459 > # all alerts get passed on.
460 > Alerter.WebFeeder.level = OK
461 >
462 > # The WebFeeder cleans out old and stale alerts when it
463 > # performs a check. This setting is the period, in seconds,
464 > # at which a check happens.
465 > WebFeeder.checkPeriod = 120
466 >
467 > # Delete alerts older than this, in seconds.
468 > WebFeeder.alertDeleteOlderThan = 300
469 >
470 > # Data will be dropped to a subdirectory (specified
471 > # below) of this directory.
472 > WebFeeder.rootPath = /web/i-scream
473 >
474 > # SubDir is the directory below rootPath which latest
475 > # data will be placed in. Below that a directory will
476 > # be created with the machine name, and a file named
477 > # FileName (specified here) will be created containg
478 > # the data.
479 > WebFeeder.latestSubDir = latest
480 > WebFeeder.latestFileName = latest_data
481 >
482 > # As above, but for the alerts.
483 > WebFeeder.alertSubDir = alert
484 > WebFeeder.alertFileName = alert_data
485 >
486 >
487 > ############################################################

Diff Legend

Removed lines
+ Added lines
< Changed lines
> Changed lines