--- projects/cms/source/server/build/etc/system.conf	2001/03/04 02:45:14	1.16
+++ projects/cms/source/server/build/etc/system.conf	2001/03/16 05:28:00	1.38
@@ -5,8 +5,8 @@
 # configuration system has this file as its 
 # root of configuration
 #
-# $Author: ajm $
-# $Id: system.conf,v 1.16 2001/03/04 02:45:14 ajm Exp $
+# $Author: tdb $
+# $Id: system.conf,v 1.38 2001/03/16 05:28:00 tdb Exp $
 #
 ############################################################
 #### Configuration Files & Groups
@@ -58,7 +58,7 @@ Filter.UDPListenPort=4589
 Filter.TCPListenPort=4589
 
 # Plugin Information
-Filter.PluginsPackage=uk.ac.ukc.iscream.filter.plugins
+Filter.PluginsPackage=uk.org.iscream.filter.plugins
 Filter.Plugins=TypeChecker;EnforceEssentialData
 
 # The name for the root filter
@@ -94,7 +94,7 @@ ClientInterface.listenPort=4510
 ############################################################
 
 # The default filter for a new host
-Host.filter=filter1
+Host.filter=computingFilter;
 
 # The default update times for a new host
 Host.UDPUpdateTime=10
@@ -102,8 +102,8 @@ Host.TCPUpdateTime=60
 Host.AveragerUpdateTime=5
 
 # The services checks to run on a host
-Host.serviceChecksPackage=uk.ac.ukc.iscream.filter.plugins
-Host.serviceChecks=HTTP;SMTP
+Host.serviceChecksPackage=uk.org.iscream.filter.plugins
+Host.serviceChecks=HTTP;SMTP;POP3;SSH;FTP;IMAP;Telnet
 
 
 
@@ -112,10 +112,11 @@ Host.serviceChecks=HTTP;SMTP
 ############################################################
 
 # the monitors to run
-Monitor.PluginsPackage=uk.ac.ukc.iscream.client.monitors
-Monitor.Plugins=CPU;
+Monitor.PluginsPackage=uk.org.iscream.client.monitors
+Monitor.Plugins=CPU;Disk;Memory;Swap;Services;Heartbeat;WebFeeder;
 
-# CPU monitor configuration
+
+## CPU monitor configuration
 # threshold values
 # 
 # note: if the UPPER threshold is broken,
@@ -131,32 +132,185 @@ Monitor.CPU.alertTimeout.CAUTION=1800
 Monitor.CPU.alertTimeout.CRITICAL=3600
 
 
+## Memory monitor configuration
+# threshold values
+# 
+# note: if the UPPER threshold is broken,
+# the alertTimeout values are halved.
+# This is to escalate the alert quicker.
+Monitor.Memory.threshold.LOWER=80
+Monitor.Memory.threshold.UPPER=90
 
+# timings of the alerts (in seconds)
+Monitor.Memory.alertTimeout.NOTICE=60
+Monitor.Memory.alertTimeout.WARNING=900
+Monitor.Memory.alertTimeout.CAUTION=1800
+Monitor.Memory.alertTimeout.CRITICAL=3600
+
+
+## Swap monitor configuration
+# threshold values
+# 
+# note: if the UPPER threshold is broken,
+# the alertTimeout values are halved.
+# This is to escalate the alert quicker.
+Monitor.Swap.threshold.LOWER=80
+Monitor.Swap.threshold.UPPER=90
+
+# timings of the alerts (in seconds)
+Monitor.Swap.alertTimeout.NOTICE=60
+Monitor.Swap.alertTimeout.WARNING=900
+Monitor.Swap.alertTimeout.CAUTION=1800
+Monitor.Swap.alertTimeout.CRITICAL=3600
+
+
+## Disk monitor configuration
+# threshold values
+# 
+# note: if the UPPER threshold is broken,
+# the alertTimeout values are halved.
+# This is to escalate the alert quicker.
+Monitor.Disk.threshold.LOWER=80
+Monitor.Disk.threshold.UPPER=90
+
+# timings of the alerts (in seconds)
+Monitor.Disk.alertTimeout.NOTICE=60
+Monitor.Disk.alertTimeout.WARNING=900
+Monitor.Disk.alertTimeout.CAUTION=1800
+Monitor.Disk.alertTimeout.CRITICAL=3600
+
+
+## Services monitor configuration
+# threshold values
+# 
+# THE SERVICES MONITOR USES A HACK
+# WHEREBY IT USES THE SERVICE STATUS
+# AS THE THRESHOLD LEVEL.  THIS SHOULD
+# BE LOOKED AT!
+#
+# note: if the UPPER threshold is broken,
+# the alertTimeout values are halved.
+# This is to escalate the alert quicker.
+#Monitor.Services.threshold.LOWER=120
+#Monitor.Services.threshold.LOWER=300
+
+# timings of the alerts (in seconds)
+Monitor.Services.alertTimeout.NOTICE=60
+Monitor.Services.alertTimeout.WARNING=900
+Monitor.Services.alertTimeout.CAUTION=1800
+Monitor.Services.alertTimeout.CRITICAL=3600
+
+# Make sure we shut up eventually
+Monitor.Services.reachFINALcount=5
+
+
+## Heartbeat monitor configuration
+# threshold values
+# 
+# note: if the UPPER threshold is broken,
+# the alertTimeout values are halved.
+# This is to escalate the alert quicker.
+Monitor.Heartbeat.checkPeriod=50
+# these are values in seconds from when the heartbeat
+# was *expected* to arrive (ie. last + hearbeat period)
+Monitor.Heartbeat.threshold.LOWER=120
+Monitor.Heartbeat.threshold.UPPER=300
+
+# timings of the alerts (in seconds)
+Monitor.Heartbeat.alertTimeout.NOTICE=60
+Monitor.Heartbeat.alertTimeout.WARNING=900
+Monitor.Heartbeat.alertTimeout.CAUTION=1800
+Monitor.Heartbeat.alertTimeout.CRITICAL=3600
+
+# this means it will reach a FINAL level,
+# and thus the host will be removed from the monitor list,
+# if the highest level alert is reached and occours this
+# number of times.
+#
+# int this setup, that means 5 CRITICAL alerts would occour
+# on a Heartbeat before reaching FINAL.
+# If this value is wrong or not present, FINAL is never reached
+#
+Monitor.Heartbeat.reachFINALcount=5
+
 ############################################################
 #### Alerter Configuration
 ############################################################
+# The following var's are understood by ALL alerters for messages
+#
+# %level%               - the alert level (eg, WARNING)
+# %threshold%           - the threshold broken (eg, LOWER)
+# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
+# %value%               - the value reached (eg, 95)
+# %thresholdValue%      - the value of the threshold broken (eg, 90)
+# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
+# %timeTillNextAlert%   - the time the next alert will be sent out
+# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
+# %timeOfFirstAlert%    - the time the first alert was sent
+#
 
 # alerters to run
-Alerter.PluginsPackage=uk.ac.ukc.iscream.client.alerters
-Alerter.Plugins=EMail;IRC;
+Alerter.PluginsPackage=uk.org.iscream.client.alerters
+Alerter.Plugins=EMail;IRC;WebFeeder;
 
 # EMail alerter configuration
-Alerter.EMail.level = CAUTION
+Alerter.EMail.level = WARNING
 Alerter.EMail.destList = dev@i-scream.org.uk
 Alerter.EMail.sender = dev@i-scream.org.uk
 Alerter.EMail.smtpServer = mercury.ukc.ac.uk
 Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
-Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
+Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
 
+
 # IRC alerter configuration
 Alerter.IRC.level = OK
 Alerter.IRC.IRCServer = killigrew.ukc.ac.uk
-
 Alerter.IRC.IRCPort = 6667
-Alerter.IRC.nick = iscreamBot
+Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
+Alerter.IRC.user = i-scream
+Alerter.IRC.comment = i-scream alerting bot
 Alerter.IRC.channel = #i-scream
 Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
+Alerter.IRC.reconnectDelay = 30
+Alerter.IRC.startupNotice = i-scream alerting bot activated 
+Alerter.IRC.stopCommand = stop alerts
+Alerter.IRC.startCommand = start alerts
+Alerter.IRC.lastAlertCommand = last alert
+Alerter.IRC.joinCommand = join
+Alerter.IRC.nickChangeCommand = nick
+Alerter.IRC.statCommand = statistics
+Alerter.IRC.uptimeCommand = uptime
+Alerter.IRC.timeSinceLastAlertCommand = time since last alert
+Alerter.IRC.versionCommand = version
+Alerter.IRC.helpCommand = help
+Alerter.IRC.rejectMessage = sorry, I don't understand your request
 
+############################################################
+#### WebFeeder Configuration
+############################################################
 
+# Define these (one or both_ to turn on the WebFeeder's,
+# comment it to turn them off
+WebFeeder.latestActive = true
+WebFeeder.alertActive = true
 
+# Check period in seconds (for cleaning stale/old alerts)
+WebFeeder.checkPeriod = 1800
+
+# Delete alerts older than this, in seconds.
+# Files are only check every WebFeeder.checkPeriod seconds.
+WebFeeder.alertDeleteOlderThan = 3600
+
+# Root Path
+WebFeeder.rootPath = /usr/local/proj/co600_10/webroot
+
+# Latest Data
+WebFeeder.latestSubDir = latest
+WebFeeder.latestFileName = latest_data
+
+# Alert Data
+WebFeeder.alertSubDir = alert
+WebFeeder.alertFileName = alert_data
+
 ############################################################
+