--- projects/cms/source/server/build/etc/system.conf	2000/12/12 19:00:44	1.1.2.1
+++ projects/cms/source/server/build/etc/system.conf	2002/03/19 16:37:28	1.61
@@ -6,38 +6,323 @@
 # root of configuration
 #
 # $Author: tdb $
-# $Id: system.conf,v 1.1.2.1 2000/12/12 19:00:44 tdb Exp $
+# $Id: system.conf,v 1.61 2002/03/19 16:37:28 tdb Exp $
+#
+############################################################
+#### Configuration Files & Groups
+############################################################
 
-# FilterManager configuration
+# for computing machines
+group.computing=Host.129.12.4.*;
+group.rocks=Host.agate.ukc.ac.uk;Host.arkose.ukc.ac.uk;Host.basalt.ukc.ac.uk;Host.chalk.ukc.ac.uk;\
+            Host.chert.ukc.ac.uk;Host.granite.ukc.ac.uk;Host.jade.ukc.ac.uk;Host.jasper.ukc.ac.uk;\
+            Host.magnetite.ukc.ac.uk;Host.obsidian.ukc.ac.uk;Host.pumice.ukc.ac.uk;\
+            Host.pyrite.ukc.ac.uk;Host.slate.ukc.ac.uk;Host.topaz.ukc.ac.uk;
+group.compsoc=Host.compsoc1.ukc.ac.uk
 
+config.computing=computing.conf
+config.rocks=rocks.conf
+config.compsoc1=rocks.conf
+
+# for library machines
+group.library=Host.129.12.58.*;
+config.library=library.conf
+
+# for SSB machines
+group.ssb=Host.stue*.ukc.ac.uk;
+config.ssb=ssb.conf
+
+# mySQL configuration
+config.mySQL=mySQL.conf
+
+############################################################
+#### Misc system-wide configuration
+############################################################
+
+# the time (in seconds) that checks should be made for
+# changes in configuration
+ConfigurationProxy.updateTime=60
+
+# The time interval at which the Queue's should be monitored
+Queue.MonitorInterval=15
+# The upper limit for a Queue
+Queue.SizeLimit=1000
+# The removal algorithm
+Queue.RemoveAlgorithm=FIRST
+
+
+############################################################
+#### FilterManager configuration
+############################################################
+
 # The default port to listen for new host connections
 FilterManager.listenPort=4567
 
+
+
+############################################################
+#### Filter configuration
+############################################################
+
 # The default port for Filter's to listen on
 Filter.UDPListenPort=4589
 Filter.TCPListenPort=4589
 
+# Plugin Information
+Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
+Filter.Plugins=TypeChecker;EnforceEssentialData
+
 # The name for the root filter
 RootFilter.name=root
+
+# The default parent filter (should almost always be the same as Filter.rootFilter)
+Filter.parentFilter=root
+
+# The input methods to activate
+# (comment or set to 0 to disable)
+Filter.ActivateTCPReader=1
+Filter.ActivateUDPReader=1
+Filter.ActivateCORBAReader=1
+
+
+############################################################
+#### Root filter interfaces configuration
+############################################################
+
+# Comment either of these (or delete them) and
+# that interface won't be started
 RootFilter.realtimeInterfaceName=realtimeclients
 RootFilter.dbInterfaceName=database
 
+
+
+############################################################
+#### Client interface configuration
+############################################################
+
 # The port for the client interface to listen on
 ClientInterface.listenPort=4510
+# The name for the client interface
+ClientInterface.name=realtimeclients
 
-# The default parent filter (should almost always be the same as Filter.rootFilter)
-Filter.parentFilter=root
 
+
+############################################################
+#### Database interface configuration
+############################################################
+
+# The name for the Database interface
+DBInterface.name=database
+
+
+
+############################################################
+#### Host Configuration
+############################################################
+
 # The default filter for a new host
-Host.filter=filter1
+Host.filter=computingFilter;
 
 # The default update times for a new host
-Host.UDPUpdateTime=5
+Host.UDPUpdateTime=10
 Host.TCPUpdateTime=60
 
-# Plugin Information
-Filter.PluginsPackage=uk.ac.ukc.iscream.filter.plugins
-Filter.Plugins=EnforceEssentialData
+# The services checks to run on a host
+Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
 
-# mySQL Details
-config.mySQL=mySQL.conf
\ No newline at end of file
+
+
+############################################################
+#### Monitor Configuration
+############################################################
+
+## The monitors to run
+Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
+Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
+                Heartbeat;Queue;UserCount;WebFeeder;
+
+## Default alert timeouts
+# these can be override on a per-monitor basis
+# timings of the alerts (in seconds)
+Monitor.alertTimeout.NOTICE=60
+Monitor.alertTimeout.WARNING=900
+Monitor.alertTimeout.CAUTION=1800
+Monitor.alertTimeout.CRITICAL=3600
+
+## Threshold values
+# 
+# note: if the UPPER threshold is broken,
+# the alertTimeout values are halved.
+# This is to escalate the alert quicker.
+#
+
+# CPU monitor threshold values
+Monitor.CPU.threshold.LOWER=90
+Monitor.CPU.threshold.UPPER=99
+
+
+# Load monitor threshold values
+Monitor.Load.threshold.LOWER=10.0
+Monitor.Load.threshold.UPPER=20.0
+
+
+# Process Count threshold values
+Monitor.Process.threshold.LOWER=1000
+Monitor.Process.threshold.UPPER=1500
+
+
+# Memory monitor threshold values
+Monitor.Memory.threshold.LOWER=80
+Monitor.Memory.threshold.UPPER=90
+
+
+# Swap monitor threshold values
+Monitor.Swap.threshold.LOWER=80
+Monitor.Swap.threshold.UPPER=90
+
+
+# UserCount monitor threshold values
+Monitor.UserCount.threshold.LOWER=100
+Monitor.UserCount.threshold.UPPER=200
+
+
+# Disk monitor threshold values
+Monitor.Disk.threshold.LOWER=90
+Monitor.Disk.threshold.UPPER=95
+# Thresholds given are PERCENTAGE or VALUE
+# where PERCENTAGE is a percentage of disk in use
+# and VALUE is an absolute value of space free
+Monitor.Disk.thresholdMeasure=PERCENTAGE
+
+
+# Queue monitor threshold values
+Monitor.Queue.threshold.LOWER=50
+Monitor.Queue.threshold.UPPER=80
+# Thresholds given are PERCENTAGE or VALUE
+# where PERCENTAGE is a percentage of disk in use
+# and VALUE is an absolute value of space free
+Monitor.Queue.thresholdMeasure=PERCENTAGE
+
+
+# Services monitor threshold values
+# 
+# THE SERVICES MONITOR USES A HACK
+# WHEREBY IT USES THE SERVICE STATUS
+# AS THE THRESHOLD LEVEL.  THIS SHOULD
+# BE LOOKED AT!
+#
+# how many times we should be at the highest level before
+# we go to a FINAL alert
+Monitor.Services.reachFINALcount=5
+
+
+# Heartbeat threshold values
+# these are values in seconds from when the heartbeat
+# was *expected* to arrive (ie. last + hearbeat period)
+Monitor.Heartbeat.threshold.LOWER=180
+Monitor.Heartbeat.threshold.UPPER=300
+# this is how often we will run a "check" of heartbeats
+Monitor.Heartbeat.checkPeriod=50
+# how many times we should be at the highest level before
+# we go to a FINAL alert
+Monitor.Heartbeat.reachFINALcount=5
+# list of hosts we expect to have at startup
+# this ensures we notice hosts that aren't running, not
+# just those that have gone down recently.
+Monitor.Heartbeat.initialHosts=raptor.ukc.ac.uk;myrtle.ukc.ac.uk;kestrel.ukc.ac.uk
+
+
+
+############################################################
+#### Alerter Configuration
+############################################################
+# The following var's are understood by ALL alerters for messages
+#
+# %level%               - the alert level (eg, WARNING)
+# %threshold%           - the threshold broken (eg, LOWER)
+# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
+# %value%               - the value reached (eg, 95)
+# %thresholdValue%      - the value of the threshold broken (eg, 90)
+# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
+# %timeTillNextAlert%   - the time the next alert will be sent out
+# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
+# %timeOfFirstAlert%    - the time the first alert was sent
+#
+
+# alerters to run
+Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
+Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
+
+
+# EMail alerter configuration
+Alerter.EMail.level = WARNING
+Alerter.EMail.destList = dev@i-scream.org.uk
+Alerter.EMail.sender = dev@i-scream.org.uk
+Alerter.EMail.smtpServer = mercury.ukc.ac.uk
+Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
+Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
+
+
+# IRC alerter configuration
+Alerter.IRC.level = OK
+Alerter.IRC.IRCServer = killigrew.ukc.ac.uk
+Alerter.IRC.IRCPort = 6667
+Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
+Alerter.IRC.user = i-scream
+Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
+Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
+Alerter.IRC.channel = #i-scream
+Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
+Alerter.IRC.reconnectDelay = 30
+Alerter.IRC.startupNotice = i-scream alerting bot activated 
+Alerter.IRC.stopCommand = stop alerts
+Alerter.IRC.startCommand = start alerts
+Alerter.IRC.lastAlertCommand = last alert
+Alerter.IRC.joinCommand = join
+Alerter.IRC.nickChangeCommand = nick
+Alerter.IRC.statCommand = statistics
+Alerter.IRC.uptimeCommand = uptime
+Alerter.IRC.timeSinceLastAlertCommand = time since last alert
+Alerter.IRC.versionCommand = version
+Alerter.IRC.helpCommand = help
+Alerter.IRC.rejectMessage = sorry, I don't understand your request
+
+
+# Logging alerter configuration
+Alerter.Logging.level = WARNING
+Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
+
+
+
+############################################################
+#### WebFeeder Configuration
+############################################################
+
+# Define these (one or both_ to turn on the WebFeeder's,
+# comment it to turn them off
+WebFeeder.latestActive = true
+WebFeeder.alertActive = true
+
+# Only pass on alerts past this level
+Alerter.WebFeeder.level = OK
+
+# Check period in seconds (for cleaning stale/old alerts)
+WebFeeder.checkPeriod = 120
+
+# Delete alerts older than this, in seconds.
+# Files are only check every WebFeeder.checkPeriod seconds.
+WebFeeder.alertDeleteOlderThan = 300
+
+# Root Path
+WebFeeder.rootPath = /usr/local/proj/co600_10/webroot
+
+# Latest Data
+WebFeeder.latestSubDir = latest
+WebFeeder.latestFileName = latest_data
+
+# Alert Data
+WebFeeder.alertSubDir = alert
+WebFeeder.alertFileName = alert_data
+
+
+############################################################