--- projects/cms/source/server/build/etc/system.conf	2001/03/22 00:05:59	1.43
+++ projects/cms/source/server/build/etc/system.conf	2002/03/22 14:22:58	1.66
@@ -6,7 +6,7 @@
 # root of configuration
 #
 # $Author: tdb $
-# $Id: system.conf,v 1.43 2001/03/22 00:05:59 tdb Exp $
+# $Id: system.conf,v 1.66 2002/03/22 14:22:58 tdb Exp $
 #
 ############################################################
 #### Configuration Files & Groups
@@ -58,8 +58,11 @@ Queue.RemoveAlgorithm=FIRST
 # The default port to listen for new host connections
 FilterManager.listenPort=4567
 
+# Access control list
+FilterManager.ACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
 
 
+
 ############################################################
 #### Filter configuration
 ############################################################
@@ -69,8 +72,8 @@ Filter.UDPListenPort=4589
 Filter.TCPListenPort=4589
 
 # Plugin Information
-Filter.PluginsPackage=uk.org.iscream.filter.plugins
-Filter.Plugins=TypeChecker;EnforceEssentialData
+Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
+Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker;KeyChecker
 
 # The name for the root filter
 RootFilter.name=root
@@ -78,8 +81,29 @@ RootFilter.name=root
 # The default parent filter (should almost always be the same as Filter.rootFilter)
 Filter.parentFilter=root
 
+# The input methods to activate
+# (comment or set to 0 to disable)
+Filter.ActivateTCPReader=1
+Filter.ActivateUDPReader=1
+Filter.ActivateCORBAReader=1
 
+# Access control list for the TCP and UDP inputs
+Filter.TCPACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
+Filter.UDPACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
 
+# Access control list for the SourceChecker plugin
+#   - packets not permitted by this ACL will be filtered
+Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
+
+# Enforce host authentication?
+# (comment or set to 0 to disable)
+Filter.EnforceHostAuth=1
+
+# Length of keys to use in authentication
+Filter.KeyLength=15
+
+
+
 ############################################################
 #### Root filter interfaces configuration
 ############################################################
@@ -97,10 +121,25 @@ RootFilter.dbInterfaceName=database
 
 # The port for the client interface to listen on
 ClientInterface.listenPort=4510
+# The name for the client interface
+ClientInterface.name=realtimeclients
 
+# Access Control List for TCP Clients
+ClientInterface.TCPControlChannelACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
+ClientInterface.TCPDataChannelACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
 
 
+
 ############################################################
+#### Database interface configuration
+############################################################
+
+# The name for the Database interface
+DBInterface.name=database
+
+
+
+############################################################
 #### Host Configuration
 ############################################################
 
@@ -110,10 +149,9 @@ Host.filter=computingFilter;
 # The default update times for a new host
 Host.UDPUpdateTime=10
 Host.TCPUpdateTime=60
-Host.AveragerUpdateTime=5
 
 # The services checks to run on a host
-Host.serviceChecksPackage=uk.org.iscream.filter.plugins
+Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
 
 
 
@@ -121,129 +159,102 @@ Host.serviceChecksPackage=uk.org.iscream.filter.plugin
 #### Monitor Configuration
 ############################################################
 
-# the monitors to run
-Monitor.PluginsPackage=uk.org.iscream.client.monitors
-Monitor.Plugins=CPU;Disk;Memory;Swap;Services;Heartbeat;WebFeeder;
-#Monitor.Plugins=CPU;WebFeeder;
-#Monitor.Plugins=
+## The monitors to run
+Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
+Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
+                Heartbeat;Queue;UserCount;WebFeeder;
 
+## Default alert timeouts
+# these can be override on a per-monitor basis
+# timings of the alerts (in seconds)
+Monitor.alertTimeout.NOTICE=60
+Monitor.alertTimeout.WARNING=900
+Monitor.alertTimeout.CAUTION=1800
+Monitor.alertTimeout.CRITICAL=3600
 
-## CPU monitor configuration
-# threshold values
+## Threshold values
 # 
 # note: if the UPPER threshold is broken,
 # the alertTimeout values are halved.
 # This is to escalate the alert quicker.
+#
+
+# CPU monitor threshold values
 Monitor.CPU.threshold.LOWER=90
 Monitor.CPU.threshold.UPPER=99
 
-# timings of the alerts (in seconds)
-Monitor.CPU.alertTimeout.NOTICE=60
-Monitor.CPU.alertTimeout.WARNING=900
-Monitor.CPU.alertTimeout.CAUTION=1800
-Monitor.CPU.alertTimeout.CRITICAL=3600
 
+# Load monitor threshold values
+Monitor.Load.threshold.LOWER=10.0
+Monitor.Load.threshold.UPPER=20.0
 
-## Memory monitor configuration
-# threshold values
-# 
-# note: if the UPPER threshold is broken,
-# the alertTimeout values are halved.
-# This is to escalate the alert quicker.
+
+# Process Count threshold values
+Monitor.Process.threshold.LOWER=1000
+Monitor.Process.threshold.UPPER=1500
+
+
+# Memory monitor threshold values
 Monitor.Memory.threshold.LOWER=80
 Monitor.Memory.threshold.UPPER=90
 
-# timings of the alerts (in seconds)
-Monitor.Memory.alertTimeout.NOTICE=60
-Monitor.Memory.alertTimeout.WARNING=900
-Monitor.Memory.alertTimeout.CAUTION=1800
-Monitor.Memory.alertTimeout.CRITICAL=3600
 
-
-## Swap monitor configuration
-# threshold values
-# 
-# note: if the UPPER threshold is broken,
-# the alertTimeout values are halved.
-# This is to escalate the alert quicker.
+# Swap monitor threshold values
 Monitor.Swap.threshold.LOWER=80
 Monitor.Swap.threshold.UPPER=90
 
-# timings of the alerts (in seconds)
-Monitor.Swap.alertTimeout.NOTICE=60
-Monitor.Swap.alertTimeout.WARNING=900
-Monitor.Swap.alertTimeout.CAUTION=1800
-Monitor.Swap.alertTimeout.CRITICAL=3600
 
+# UserCount monitor threshold values
+Monitor.UserCount.threshold.LOWER=100
+Monitor.UserCount.threshold.UPPER=200
 
-## Disk monitor configuration
-# threshold values
-# 
-# note: if the UPPER threshold is broken,
-# the alertTimeout values are halved.
-# This is to escalate the alert quicker.
+
+# Disk monitor threshold values
 Monitor.Disk.threshold.LOWER=90
 Monitor.Disk.threshold.UPPER=95
+# Thresholds given are PERCENTAGE or VALUE
+# where PERCENTAGE is a percentage of disk in use
+# and VALUE is an absolute value of space free
+Monitor.Disk.thresholdMeasure=PERCENTAGE
 
-# timings of the alerts (in seconds)
-Monitor.Disk.alertTimeout.NOTICE=60
-Monitor.Disk.alertTimeout.WARNING=900
-Monitor.Disk.alertTimeout.CAUTION=1800
-Monitor.Disk.alertTimeout.CRITICAL=3600
 
+# Queue monitor threshold values
+Monitor.Queue.threshold.LOWER=50
+Monitor.Queue.threshold.UPPER=80
+# Thresholds given are PERCENTAGE or VALUE
+# where PERCENTAGE is a percentage of disk in use
+# and VALUE is an absolute value of space free
+Monitor.Queue.thresholdMeasure=PERCENTAGE
 
-## Services monitor configuration
-# threshold values
+
+# Services monitor threshold values
 # 
 # THE SERVICES MONITOR USES A HACK
 # WHEREBY IT USES THE SERVICE STATUS
 # AS THE THRESHOLD LEVEL.  THIS SHOULD
 # BE LOOKED AT!
 #
-# note: if the UPPER threshold is broken,
-# the alertTimeout values are halved.
-# This is to escalate the alert quicker.
-#Monitor.Services.threshold.LOWER=120
-#Monitor.Services.threshold.LOWER=300
-
-# timings of the alerts (in seconds)
-Monitor.Services.alertTimeout.NOTICE=60
-Monitor.Services.alertTimeout.WARNING=900
-Monitor.Services.alertTimeout.CAUTION=1800
-Monitor.Services.alertTimeout.CRITICAL=3600
-
-# Make sure we shut up eventually
+# how many times we should be at the highest level before
+# we go to a FINAL alert
 Monitor.Services.reachFINALcount=5
 
 
-## Heartbeat monitor configuration
-# threshold values
-# 
-# note: if the UPPER threshold is broken,
-# the alertTimeout values are halved.
-# This is to escalate the alert quicker.
-Monitor.Heartbeat.checkPeriod=50
+# Heartbeat threshold values
 # these are values in seconds from when the heartbeat
 # was *expected* to arrive (ie. last + hearbeat period)
-Monitor.Heartbeat.threshold.LOWER=120
+Monitor.Heartbeat.threshold.LOWER=180
 Monitor.Heartbeat.threshold.UPPER=300
+# this is how often we will run a "check" of heartbeats
+Monitor.Heartbeat.checkPeriod=50
+# how many times we should be at the highest level before
+# we go to a FINAL alert
+Monitor.Heartbeat.reachFINALcount=5
+# list of hosts we expect to have at startup
+# this ensures we notice hosts that aren't running, not
+# just those that have gone down recently.
+Monitor.Heartbeat.initialHosts=raptor.ukc.ac.uk;myrtle.ukc.ac.uk;kestrel.ukc.ac.uk
 
-# timings of the alerts (in seconds)
-Monitor.Heartbeat.alertTimeout.NOTICE=60
-Monitor.Heartbeat.alertTimeout.WARNING=900
-Monitor.Heartbeat.alertTimeout.CAUTION=1800
-Monitor.Heartbeat.alertTimeout.CRITICAL=3600
 
-# this means it will reach a FINAL level,
-# and thus the host will be removed from the monitor list,
-# if the highest level alert is reached and occours this
-# number of times.
-#
-# int this setup, that means 5 CRITICAL alerts would occour
-# on a Heartbeat before reaching FINAL.
-# If this value is wrong or not present, FINAL is never reached
-#
-Monitor.Heartbeat.reachFINALcount=5
 
 ############################################################
 #### Alerter Configuration
@@ -262,12 +273,10 @@ Monitor.Heartbeat.reachFINALcount=5
 #
 
 # alerters to run
-Alerter.PluginsPackage=uk.org.iscream.client.alerters
-#Alerter.Plugins=EMail;IRC;WebFeeder;
-Alerter.Plugins=IRC;WebFeeder;
-#Alerter.Plugins=WebFeeder;
-#Alerter.Plugins=
+Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
+Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
 
+
 # EMail alerter configuration
 Alerter.EMail.level = WARNING
 Alerter.EMail.destList = dev@i-scream.org.uk
@@ -283,7 +292,8 @@ Alerter.IRC.IRCServer = killigrew.ukc.ac.uk
 Alerter.IRC.IRCPort = 6667
 Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
 Alerter.IRC.user = i-scream
-Alerter.IRC.comment = i-scream alerting bot
+Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
+Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
 Alerter.IRC.channel = #i-scream
 Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
 Alerter.IRC.reconnectDelay = 30
@@ -300,6 +310,13 @@ Alerter.IRC.versionCommand = version
 Alerter.IRC.helpCommand = help
 Alerter.IRC.rejectMessage = sorry, I don't understand your request
 
+
+# Logging alerter configuration
+Alerter.Logging.level = WARNING
+Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
+
+
+
 ############################################################
 #### WebFeeder Configuration
 ############################################################
@@ -310,7 +327,7 @@ WebFeeder.latestActive = true
 WebFeeder.alertActive = true
 
 # Only pass on alerts past this level
-WebFeeder.alertLevel = OK
+Alerter.WebFeeder.level = OK
 
 # Check period in seconds (for cleaning stale/old alerts)
 WebFeeder.checkPeriod = 120
@@ -330,5 +347,5 @@ WebFeeder.latestFileName = latest_data
 WebFeeder.alertSubDir = alert
 WebFeeder.alertFileName = alert_data
 
-############################################################
 
+############################################################