ViewVC Help
View File | Revision Log | Show Annotations | Revision Graph | Root Listing
root/i-scream/projects/cms/source/server/build/etc/system.conf
(Generate patch)

Comparing projects/cms/source/server/build/etc/system.conf (file contents):
Revision 1.14 by ajm, Fri Mar 2 00:47:54 2001 UTC vs.
Revision 1.71 by tdb, Mon Feb 24 20:18:45 2003 UTC

# Line 5 | Line 5
5   # configuration system has this file as its
6   # root of configuration
7   #
8 + # This is a working sample configuration, which
9 + # aims to provide a working "out of the box"
10 + # setup, aswell as a some example configuration.
11 + #
12   # $Author$
13   # $Id$
14   #
15 + # http://www.i-scream.org.uk/
16 + #
17 +
18   ############################################################
19   #### Configuration Files & Groups
20   ############################################################
21  
22 < # for computing machines
23 < group.computing=Host.raptor.ukc.ac.uk;Host.slate.ukc.ac.uk;Host.granite.ukc.ac.uk;
24 < config.rocks=rocks.conf
22 > # All components, such as hosts, will take their configuration
23 > # as given in this file. Unless, that is, they have an extra
24 > # configuration file specified here, or they're in a group
25 > # that has a configuration file. If this is the case the extra
26 > # configuration will override what is given in this file.
27  
28 < # for library machines
29 < group.library=Host.killigrew.ukc.ac.uk;
30 < config.library=library.conf
28 > # We can define an extra configuration file for any component
29 > # of the system. This is done by specifying the following:
30 > #
31 > # config.component=someconfigfile.conf
32 > #
33 > # Component names will be defined in the documentation for
34 > # the component. An example is that a host component is
35 > # known by the name "Host.hostname" or "Host.ip".
36 > # It is also possible to use the wildcard "*" in a
37 > # hostname or IP address.
38  
39 < # mySQL configuration
40 < config.mySQL=mySQL.conf
39 > # This defines that server.example.com has some extra
40 > # configuration in the file 'server.conf'.
41 > config.Host.server.example.com=exserver.conf
42  
43 + # All webservers are placed in a group named 'www'.
44 + group.www=Host.www1.example.com;Host.www2.example.com
45 + # Then we define some extra config for them.
46 + config.www=webservers.conf
47  
48 + # Our workstations are in their own subnet.
49 + group.workstations=Host.192.168.10.*;
50 + # They can have their own config too.
51 + config.workstations=workstations.conf
52  
53 + # Any hosts not specified by now have the default
54 + # config as given in this file.
55 +
56 + # Another component of the system is the mySQL
57 + # database part of the server call the DBInterface.
58 + # This has it's own config so the passwords for the
59 + # mySQL database can be kept seperate.
60 + #config.mySQL=mySQL.conf
61 +
62 +
63   ############################################################
64 + #### Misc system-wide configuration
65 + ############################################################
66 +
67 + # The ConfigurationProxy caches configuration for various
68 + # parts of the server. This setting defines how often, in
69 + # seconds, the proxy will check if the data it contains
70 + # is still valid.
71 + ConfigurationProxy.updateTime=60
72 +
73 + # The internal Queue's can be monitored. This specifies
74 + # the interval, in seconds, at which their state should
75 + # be monitored.
76 + Queue.MonitorInterval=15
77 + # The maximum size a Queue can be before items are
78 + # dropped when new ones arrive.
79 + Queue.SizeLimit=1000
80 + # And which items we should drop when the queue is full
81 + # and new items arrive. Choices are:
82 + # RANDOM - drop a random item from the queue
83 + # FIRST  - drop the first item from the queue
84 + # LAST   - drop the last item from the queue
85 + # DROP   - drop the new item from the queue
86 + Queue.RemoveAlgorithm=FIRST
87 +
88 + # The XMLCache caches data passing through the system.
89 + # This setting specifies the time, in seconds, at which
90 + # the caches contents will be rotated. In real terms
91 + # this means the minimum age at which an XMLPacket can
92 + # be before it is up for deletion from the cache.
93 + XMLCache.cleanupPeriod=30
94 +
95 +
96 + ############################################################
97   #### FilterManager configuration
98   ############################################################
99  
100 < # The default port to listen for new host connections
100 > # The FilterManager accepts connections from hosts
101 > # upon startup. It provides them with configuration
102 > # and details of which filter to talk to. This setting
103 > # specifies which port (TCP) it listens on.
104   FilterManager.listenPort=4567
105  
106 + # An Access Control List for the FilterManager. One
107 + # might consider something like this:
108 + #
109 + # FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
110 + FilterManager.ACL=DEFAULT:ALLOW
111  
112  
113   ############################################################
114   #### Filter configuration
115   ############################################################
116  
117 < # The default port for Filter's to listen on
117 > # A Filter accepts data from hosts on a UDP port. It is
118 > # specified here.
119   Filter.UDPListenPort=4589
43 Filter.TCPListenPort=4589
120  
121 < # Plugin Information
122 < Filter.PluginsPackage=uk.ac.ukc.iscream.filter.plugins
123 < Filter.Plugins=TypeChecker;EnforceEssentialData
121 > # Filters contain plugins for checking the data passing
122 > # through them. This plugins do the job of "filtering".
123 > # This setting specifies the java package they're
124 > # contained in.
125 > Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
126 > # And the names of the plugins to be loaded.
127 > Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker
128  
129 < # The name for the root filter
129 > # The special filter known as the "Root Filter" needs
130 > # a name within the system.
131   RootFilter.name=root
132  
133 < # The default parent filter (should almost always be the same as Filter.rootFilter)
133 > # Every Filter, except the root, needs a parent to
134 > # send their data to. This is usually the root filter,
135 > # although in more complex setups it might be another
136 > # filter - giving a tree structure.
137   Filter.parentFilter=root
138  
139 + # A Filter can accept data through UDP, or from
140 + # an upstream Filter (CORBA). These methods can be
141 + # individually turned of on a filter. The default
142 + # is to have them all on.
143 + # (comment or set to 0 to disable)
144 + Filter.ActivateUDPReader=1
145 + Filter.ActivateCORBAReader=1
146  
147 + # We can also specify Access Control Lists for the
148 + # UDP input of the Filters. One might want something
149 + # restrictive like this:
150 + #
151 + # Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
152 + Filter.UDPACL=DEFAULT:ALLOW
153  
154 + # A Filter plugin called the SourceChecker verifies
155 + # that packets come from permitted hosts. It is
156 + # given an ACL to check the hosts against. A possible
157 + # ACL might be:
158 + #
159 + # Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
160 + Filter.SourceCheckerPluginACL=DEFAULT:ALLOW
161 +
162 +
163   ############################################################
164   #### Root filter interfaces configuration
165   ############################################################
166  
167 < # Comment either of these (or delete them) and
168 < # that interface won't be started
167 > # The Root FIlter can send data to various upstream
168 > # data processors. There are two of these at present
169 > # in the server - the DBInterface and the ClientInterface.
170 > # Their component names are given here as defined below.
171 > # (the DBInterface is switched off - commented - by default)
172 > #RootFilter.dbInterfaceName=database
173   RootFilter.realtimeInterfaceName=realtimeclients
64 RootFilter.dbInterfaceName=database
174  
175  
67
176   ############################################################
177   #### Client interface configuration
178   ############################################################
179  
180 < # The port for the client interface to listen on
180 > # The client interface listens for connections from clients
181 > # on a TCP port. It is specified here.
182   ClientInterface.listenPort=4510
183 + # The component name for the Client Interface. This should
184 + # match the name specified to the Root Filter above.
185 + ClientInterface.name=realtimeclients
186  
187 + # The Client Interface has two channels, control and data.
188 + # Each of these can have an ACL for allowing connections.
189 + # As per previous examples in this configuration file they
190 + # could be set restrictively, but we'll leave them open
191 + # by default
192 + ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
193 + ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW
194  
195  
196   ############################################################
197 < #### Host Configuration
197 > #### Database interface configuration
198   ############################################################
199  
200 < # The default filter for a new host
201 < Host.filter=computingFilter
200 > # The name for the Database Interface. This should match
201 > # the name given to the Root Filter.
202 > DBInterface.name=database
203  
84 # The default update times for a new host
85 Host.UDPUpdateTime=10
86 Host.TCPUpdateTime=60
204  
205 < # The services checks to run on a host
206 < Host.serviceChecksPackage=uk.ac.ukc.iscream.filter.plugins
207 < Host.serviceChecks=HTTP;SMTP
205 > ############################################################
206 > #### Host Configuration
207 > ############################################################
208  
209 + # A host can use any filter. We'll set the default filter
210 + # for all hosts to be 'filter1'. This can be a list.
211 + Host.filter=filter1;
212  
213 + # Hosts send data every UDPUpdateTime, in seconds.
214 + Host.UDPUpdateTime=10
215  
216 < # The time interval at which the Queue's should be monitored
217 < Queue.MonitorInterval=15
216 > # We can run service checks on a host. The java package
217 > # which contains them is specified here.
218 > Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
219  
220  
98
221   ############################################################
222   #### Monitor Configuration
223   ############################################################
224  
225 < # the monitors to run
226 < Monitor.PluginsPackage=uk.ac.ukc.iscream.client.monitors
227 < Monitor.Plugins=CPU;
225 > # Monitors allow data to be watched for possible problems.
226 > # This setting specifies which java package they're in.
227 > Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
228 > # And which ones should be loaded.
229 > Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
230 >                Heartbeat;Queue;UserCount;WebFeeder;
231  
232 < # CPU monitor configuration
233 < Monitor.CPU.level.1=90
234 < Monitor.CPU.level.2=95
235 < Monitor.CPU.level.3=100
232 > # Alerts timeout after a given time in seconds and go up
233 > # to the next level. These can be overridden for monitors
234 > # on an individual basis.
235 > Monitor.alertTimeout.NOTICE=60
236 > Monitor.alertTimeout.WARNING=900
237 > Monitor.alertTimeout.CAUTION=1800
238 > Monitor.alertTimeout.CRITICAL=3600
239  
240 + ## Threshold values
241 + #
242 + # Here we specify the threshold for each monitor. When
243 + # a threshold is broken an alert is raised. If the
244 + # UPPER threshold is broken the alertTimeout values
245 + # given above are halved to make the alert escalate
246 + # quicker.
247  
248 + # CPU monitor threshold values
249 + Monitor.CPU.threshold.LOWER=90
250 + Monitor.CPU.threshold.UPPER=95
251  
252 + # Load monitor threshold values
253 + Monitor.Load.threshold.LOWER=10.0
254 + Monitor.Load.threshold.UPPER=20.0
255 +
256 + # Process Count threshold values
257 + Monitor.Process.threshold.LOWER=500
258 + Monitor.Process.threshold.UPPER=1000
259 +
260 + # Memory monitor threshold values
261 + Monitor.Memory.threshold.LOWER=80
262 + Monitor.Memory.threshold.UPPER=90
263 + # Whether to include 'cache' in the 'free' value
264 + # (1 is true, anything else is false)
265 + Monitor.Memory.useCacheAsFree=1
266 +
267 + # Swap monitor threshold values
268 + Monitor.Swap.threshold.LOWER=80
269 + Monitor.Swap.threshold.UPPER=90
270 +
271 + # UserCount monitor threshold values
272 + Monitor.UserCount.threshold.LOWER=100
273 + Monitor.UserCount.threshold.UPPER=200
274 +
275 + # Disk monitor threshold values
276 + Monitor.Disk.threshold.LOWER=90
277 + Monitor.Disk.threshold.UPPER=95
278 + # Thresholds given are PERCENTAGE or VALUE
279 + # where PERCENTAGE is a percentage of disk in use
280 + # and VALUE is an absolute value of space free
281 + Monitor.Disk.thresholdMeasure=PERCENTAGE
282 +
283 + # Queue monitor threshold values
284 + Monitor.Queue.threshold.LOWER=50
285 + Monitor.Queue.threshold.UPPER=80
286 + # Thresholds given are PERCENTAGE or VALUE
287 + # where PERCENTAGE is a percentage of the queue in use
288 + # and VALUE is an absolute value of free space
289 + Monitor.Queue.thresholdMeasure=PERCENTAGE
290 +
291 + # Services monitor threshold values
292 + #
293 + # THE SERVICES MONITOR USES A HACK
294 + # WHEREBY IT USES THE SERVICE STATUS
295 + # AS THE THRESHOLD LEVEL. THIS SHOULD
296 + # BE LOOKED AT!
297 + #
298 + # how many times we should be at the highest level before
299 + # we go to a FINAL alert
300 + Monitor.Services.reachFINALcount=5
301 +
302 + # Heartbeat threshold values
303 + # these are values in seconds from when the heartbeat
304 + # was *expected* to arrive (ie. last + hearbeat period)
305 + Monitor.Heartbeat.threshold.LOWER=180
306 + Monitor.Heartbeat.threshold.UPPER=300
307 + # this is how often we will run a "check" of heartbeats
308 + Monitor.Heartbeat.checkPeriod=50
309 + # how many times we should be at the highest level before
310 + # we go to a FINAL alert
311 + Monitor.Heartbeat.reachFINALcount=5
312 + # list of hosts we expect to have at startup
313 + # this ensures we notice hosts that aren't running, not
314 + # just those that have gone down recently.
315 + #Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com
316 +
317 +
318   ############################################################
319   #### Alerter Configuration
320   ############################################################
321 + # The following variables are understood by ALL alerters
322 + # for messages. They will be substituted for their
323 + # appropriate value.
324 + #
325 + # %level%               - the alert level (eg, WARNING)
326 + # %threshold%           - the threshold broken (eg, LOWER)
327 + # %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
328 + # %value%               - the value reached (eg, 95)
329 + # %thresholdValue%      - the value of the threshold broken (eg, 90)
330 + # %attributeName%       - the attribute that has caused the alert (eg, CPU User)
331 + # %timeTillNextAlert%   - the time the next alert will be sent out
332 + # %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
333 + # %timeOfFirstAlert%    - the time the first alert was sent
334 + #
335  
336 < # alerters to run
337 < Alerter.PluginsPackage=uk.ac.ukc.iscream.client.alerters
338 < Alerter.Plugins=EMail;IRC;
336 > # The java package containing the alerters
337 > Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
338 > # And the names of the ones to activate
339 > # You might want to turn them all on, but we only activate
340 > # two basic ones by default.
341 > # Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
342 > Alerter.Plugins=WebFeeder;Logging;
343  
344 < # EMail alerter configuration
345 < Alerter.EMail.level = 2
346 < Alerter.EMail.destList = dev@i-scream.org.uk
347 < Alerter.EMail.sender = dev@i-scream.org.uk
348 < Alerter.EMail.smtpServer = mercury.ukc.ac.uk
349 < Alerter.EMail.subject = i-scream alert: level %level% alert on %source for %attributeName%
350 < Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a level %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\nthreshold value of %thresholdValue%.
344 > # Configuration for the EMail alerter
345 > # The level alerts have to bypass to be e-mailed out
346 > Alerter.EMail.level = WARNING
347 > # A list of people to send alerts to
348 > Alerter.EMail.destList = me@example.com
349 > # The sender of the e-mail
350 > Alerter.EMail.sender = me@example.com
351 > # The SMTP server to send alerts to
352 > Alerter.EMail.smtpServer = smtp.example.com
353 > # The subject line of the e-mail
354 > Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
355 > # The message in the e-mail
356 > Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
357  
358 < # IRC alerter configuration
359 < Alerter.IRC.level = 1
360 < Alerter.IRC.IRCServer = killigrew.ukc.ac.uk
358 > # Configuration for the IRC alerter
359 > # The level alerts have to bypass to be sent
360 > Alerter.IRC.level = OK
361 > # The IRC server name
362 > Alerter.IRC.IRCServer = irc.example.com
363 > # and it's port
364   Alerter.IRC.IRCPort = 6667
365 < Alerter.IRC.nick = iscreamBot
365 > # A list of nicks to try and be
366 > Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
367 > # Username to be
368 > Alerter.IRC.user = i-scream
369 > # Responses to CTCP prods
370 > Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
371 > Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
372 > # Channel to join
373   Alerter.IRC.channel = #i-scream
374 < Alerter.IRC.message = level %level%: %attributeName% on %source% has reached %value%
374 > # Message to use when sending an alert
375 > Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
376 > # How long to wait before reconnecting
377 > Alerter.IRC.reconnectDelay = 30
378 > # Notice to send when starting up
379 > Alerter.IRC.startupNotice = i-scream alerting bot activated
380 > # Commands the bot will recognise
381 > Alerter.IRC.stopCommand = stop alerts
382 > Alerter.IRC.startCommand = start alerts
383 > Alerter.IRC.lastAlertCommand = last alert
384 > Alerter.IRC.joinCommand = join
385 > Alerter.IRC.nickChangeCommand = nick
386 > Alerter.IRC.statCommand = statistics
387 > Alerter.IRC.uptimeCommand = uptime
388 > Alerter.IRC.timeSinceLastAlertCommand = time since last alert
389 > Alerter.IRC.versionCommand = version
390 > Alerter.IRC.helpCommand = help
391 > # Message to send when the bot is addressed and
392 > # doesn't understand the command
393 > Alerter.IRC.rejectMessage = sorry, I don't understand your request
394 >
395 > # Configuration for the Logging Alerter
396 > # This alerter writes alerts to the i-scream logfile.
397 > # The level alerts have to bypass to be logged
398 > Alerter.Logging.level = WARNING
399 > # The message to use when logging the alert
400 > Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
401 >
402 >
403 > ############################################################
404 > #### WebFeeder Configuration
405 > ############################################################
406 >
407 > # The WebFeeder drops alerts and latest data in to a
408 > # directory for the web interface to use. It is essentially
409 > # the link between the web interface and the server.
410 >
411 > # Set these to something to tell the WebFeeder to drop
412 > # latest data, alerts, or both. Comment themt o disable.
413 > WebFeeder.latestActive = true
414 > WebFeeder.alertActive = true
415 >
416 > # We can make the WebFeeder only drop alerts that go
417 > # past a certain level. The default is "OK", which makes
418 > # all alerts get passed on.
419 > Alerter.WebFeeder.level = OK
420 >
421 > # The WebFeeder cleans out old and stale alerts when it
422 > # performs a check. This setting is the period, in seconds,
423 > # at which a check happens.
424 > WebFeeder.checkPeriod = 120
425 >
426 > # Delete alerts older than this, in seconds.
427 > WebFeeder.alertDeleteOlderThan = 300
428 >
429 > # Data will be dropped to a subdirectory (specified
430 > # below) of this directory.
431 > WebFeeder.rootPath = /web/i-scream
432 >
433 > # SubDir is the directory below rootPath which latest
434 > # data will be placed in. Below that a directory will
435 > # be created with the machine name, and a file named
436 > # FileName (specified here) will be created containg
437 > # the data.
438 > WebFeeder.latestSubDir = latest
439 > WebFeeder.latestFileName = latest_data
440 >
441 > # As above, but for the alerts.
442 > WebFeeder.alertSubDir = alert
443 > WebFeeder.alertFileName = alert_data
444 >
445  
446 < ############################################################
446 > ############################################################

Diff Legend

Removed lines
+ Added lines
< Changed lines
> Changed lines