build/etc/system.conf

# This is the default system configuration file
# used by all components of the i-scream system
#
# ALL configuration that uses the centralised
# configuration system has this file as its 
# root of configuration
#
# $Author: tdb $
# $Id: system.conf,v 1.64 2002/03/20 16:32:37 tdb Exp $
#
############################################################
#### Configuration Files & Groups
############################################################

# for computing machines
group.computing=Host.129.12.4.*;
group.rocks=Host.agate.ukc.ac.uk;Host.arkose.ukc.ac.uk;Host.basalt.ukc.ac.uk;Host.chalk.ukc.ac.uk;\
            Host.chert.ukc.ac.uk;Host.granite.ukc.ac.uk;Host.jade.ukc.ac.uk;Host.jasper.ukc.ac.uk;\
            Host.magnetite.ukc.ac.uk;Host.obsidian.ukc.ac.uk;Host.pumice.ukc.ac.uk;\
            Host.pyrite.ukc.ac.uk;Host.slate.ukc.ac.uk;Host.topaz.ukc.ac.uk;
group.compsoc=Host.compsoc1.ukc.ac.uk

config.computing=computing.conf
config.rocks=rocks.conf
config.compsoc1=rocks.conf

# for library machines
group.library=Host.129.12.58.*;
config.library=library.conf

# for SSB machines
group.ssb=Host.stue*.ukc.ac.uk;
config.ssb=ssb.conf

# mySQL configuration
config.mySQL=mySQL.conf

############################################################
#### Misc system-wide configuration
############################################################

# the time (in seconds) that checks should be made for
# changes in configuration
ConfigurationProxy.updateTime=60

# The time interval at which the Queue's should be monitored
Queue.MonitorInterval=15
# The upper limit for a Queue
Queue.SizeLimit=1000
# The removal algorithm
Queue.RemoveAlgorithm=FIRST


############################################################
#### FilterManager configuration
############################################################

# The default port to listen for new host connections
FilterManager.listenPort=4567

# Access control list
FilterManager.ACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW


############################################################
#### Filter configuration
############################################################

# The default port for Filter's to listen on
Filter.UDPListenPort=4589
Filter.TCPListenPort=4589

# Plugin Information
Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker;KeyChecker

# The name for the root filter
RootFilter.name=root

# The default parent filter (should almost always be the same as Filter.rootFilter)
Filter.parentFilter=root

# The input methods to activate
# (comment or set to 0 to disable)
Filter.ActivateTCPReader=1
Filter.ActivateUDPReader=1
Filter.ActivateCORBAReader=1

# Access control list for the TCP and UDP inputs
Filter.TCPACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
Filter.UDPACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW

# Access control list for the SourceChecker plugin
#   - packets not permitted by this ACL will be filtered
Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW

# Enforce host authentication?
# (comment or set to 0 to disable)
Filter.EnforceHostAuth=1


############################################################
#### Root filter interfaces configuration
############################################################

# Comment either of these (or delete them) and
# that interface won't be started
RootFilter.realtimeInterfaceName=realtimeclients
RootFilter.dbInterfaceName=database


############################################################
#### Client interface configuration
############################################################

# The port for the client interface to listen on
ClientInterface.listenPort=4510
# The name for the client interface
ClientInterface.name=realtimeclients

# Access Control List for TCP Clients
ClientInterface.TCPControlChannelACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW
ClientInterface.TCPDataChannelACL=DEFAULT:DENY;*.ukc.ac.uk:ALLOW;129.12.*:ALLOW


############################################################
#### Database interface configuration
############################################################

# The name for the Database interface
DBInterface.name=database


############################################################
#### Host Configuration
############################################################

# The default filter for a new host
Host.filter=computingFilter;

# The default update times for a new host
Host.UDPUpdateTime=10
Host.TCPUpdateTime=60

# The services checks to run on a host
Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins


############################################################
#### Monitor Configuration
############################################################

## The monitors to run
Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
                Heartbeat;Queue;UserCount;WebFeeder;

## Default alert timeouts
# these can be override on a per-monitor basis
# timings of the alerts (in seconds)
Monitor.alertTimeout.NOTICE=60
Monitor.alertTimeout.WARNING=900
Monitor.alertTimeout.CAUTION=1800
Monitor.alertTimeout.CRITICAL=3600

## Threshold values
# 
# note: if the UPPER threshold is broken,
# the alertTimeout values are halved.
# This is to escalate the alert quicker.
#

# CPU monitor threshold values
Monitor.CPU.threshold.LOWER=90
Monitor.CPU.threshold.UPPER=99


# Load monitor threshold values
Monitor.Load.threshold.LOWER=10.0
Monitor.Load.threshold.UPPER=20.0


# Process Count threshold values
Monitor.Process.threshold.LOWER=1000
Monitor.Process.threshold.UPPER=1500


# Memory monitor threshold values
Monitor.Memory.threshold.LOWER=80
Monitor.Memory.threshold.UPPER=90


# Swap monitor threshold values
Monitor.Swap.threshold.LOWER=80
Monitor.Swap.threshold.UPPER=90


# UserCount monitor threshold values
Monitor.UserCount.threshold.LOWER=100
Monitor.UserCount.threshold.UPPER=200


# Disk monitor threshold values
Monitor.Disk.threshold.LOWER=90
Monitor.Disk.threshold.UPPER=95
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of disk in use
# and VALUE is an absolute value of space free
Monitor.Disk.thresholdMeasure=PERCENTAGE


# Queue monitor threshold values
Monitor.Queue.threshold.LOWER=50
Monitor.Queue.threshold.UPPER=80
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of disk in use
# and VALUE is an absolute value of space free
Monitor.Queue.thresholdMeasure=PERCENTAGE


# Services monitor threshold values
# 
# THE SERVICES MONITOR USES A HACK
# WHEREBY IT USES THE SERVICE STATUS
# AS THE THRESHOLD LEVEL.  THIS SHOULD
# BE LOOKED AT!
#
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Services.reachFINALcount=5


# Heartbeat threshold values
# these are values in seconds from when the heartbeat
# was *expected* to arrive (ie. last + hearbeat period)
Monitor.Heartbeat.threshold.LOWER=180
Monitor.Heartbeat.threshold.UPPER=300
# this is how often we will run a "check" of heartbeats
Monitor.Heartbeat.checkPeriod=50
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Heartbeat.reachFINALcount=5
# list of hosts we expect to have at startup
# this ensures we notice hosts that aren't running, not
# just those that have gone down recently.
Monitor.Heartbeat.initialHosts=raptor.ukc.ac.uk;myrtle.ukc.ac.uk;kestrel.ukc.ac.uk


############################################################
#### Alerter Configuration
############################################################
# The following var's are understood by ALL alerters for messages
#
# %level%               - the alert level (eg, WARNING)
# %threshold%           - the threshold broken (eg, LOWER)
# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
# %value%               - the value reached (eg, 95)
# %thresholdValue%      - the value of the threshold broken (eg, 90)
# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
# %timeTillNextAlert%   - the time the next alert will be sent out
# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
# %timeOfFirstAlert%    - the time the first alert was sent
#

# alerters to run
Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
Alerter.Plugins=EMail;IRC;WebFeeder;Logging;


# EMail alerter configuration
Alerter.EMail.level = WARNING
Alerter.EMail.destList = dev@i-scream.org.uk
Alerter.EMail.sender = dev@i-scream.org.uk
Alerter.EMail.smtpServer = mercury.ukc.ac.uk
Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.


# IRC alerter configuration
Alerter.IRC.level = OK
Alerter.IRC.IRCServer = killigrew.ukc.ac.uk
Alerter.IRC.IRCPort = 6667
Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
Alerter.IRC.user = i-scream
Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
Alerter.IRC.channel = #i-scream
Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
Alerter.IRC.reconnectDelay = 30
Alerter.IRC.startupNotice = i-scream alerting bot activated 
Alerter.IRC.stopCommand = stop alerts
Alerter.IRC.startCommand = start alerts
Alerter.IRC.lastAlertCommand = last alert
Alerter.IRC.joinCommand = join
Alerter.IRC.nickChangeCommand = nick
Alerter.IRC.statCommand = statistics
Alerter.IRC.uptimeCommand = uptime
Alerter.IRC.timeSinceLastAlertCommand = time since last alert
Alerter.IRC.versionCommand = version
Alerter.IRC.helpCommand = help
Alerter.IRC.rejectMessage = sorry, I don't understand your request


# Logging alerter configuration
Alerter.Logging.level = WARNING
Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%


############################################################
#### WebFeeder Configuration
############################################################

# Define these (one or both_ to turn on the WebFeeder's,
# comment it to turn them off
WebFeeder.latestActive = true
WebFeeder.alertActive = true

# Only pass on alerts past this level
Alerter.WebFeeder.level = OK

# Check period in seconds (for cleaning stale/old alerts)
WebFeeder.checkPeriod = 120

# Delete alerts older than this, in seconds.
# Files are only check every WebFeeder.checkPeriod seconds.
WebFeeder.alertDeleteOlderThan = 300

# Root Path
WebFeeder.rootPath = /usr/local/proj/co600_10/webroot

# Latest Data
WebFeeder.latestSubDir = latest
WebFeeder.latestFileName = latest_data

# Alert Data
WebFeeder.alertSubDir = alert
WebFeeder.alertFileName = alert_data


############################################################
Revision:	1.65
Committed:	Thu Mar 21 17:44:51 2002 UTC (22 years, 6 months ago) by tdb
Branch:	MAIN
Changes since 1.64:	+6 -2 lines
Log Message:	Initial work on host authentication for the server. Until I can get ihost doing it's side of the host authentication I can't really test any further. It seems to work, as in it filters data which isn't authenticated when told to do so in the config :)
#	Content
1	# This is the default system configuration file
2	# used by all components of the i-scream system
3	#
4	# ALL configuration that uses the centralised
5	# configuration system has this file as its
6	# root of configuration
7	#
8	# $Author: tdb $
9	# $Id: system.conf,v 1.64 2002/03/20 16:32:37 tdb Exp $
10	#
11	############################################################
12	#### Configuration Files & Groups
13	############################################################
14
15	# for computing machines
16	group.computing=Host.129.12.4.*;
17	group.rocks=Host.agate.ukc.ac.uk;Host.arkose.ukc.ac.uk;Host.basalt.ukc.ac.uk;Host.chalk.ukc.ac.uk;\
18	Host.chert.ukc.ac.uk;Host.granite.ukc.ac.uk;Host.jade.ukc.ac.uk;Host.jasper.ukc.ac.uk;\
19	Host.magnetite.ukc.ac.uk;Host.obsidian.ukc.ac.uk;Host.pumice.ukc.ac.uk;\
20	Host.pyrite.ukc.ac.uk;Host.slate.ukc.ac.uk;Host.topaz.ukc.ac.uk;
21	group.compsoc=Host.compsoc1.ukc.ac.uk
22
23	config.computing=computing.conf
24	config.rocks=rocks.conf
25	config.compsoc1=rocks.conf
26
27	# for library machines
28	group.library=Host.129.12.58.*;
29	config.library=library.conf
30
31	# for SSB machines
32	group.ssb=Host.stue*.ukc.ac.uk;
33	config.ssb=ssb.conf
34
35	# mySQL configuration
36	config.mySQL=mySQL.conf
37
38	############################################################
39	#### Misc system-wide configuration
40	############################################################
41
42	# the time (in seconds) that checks should be made for
43	# changes in configuration
44	ConfigurationProxy.updateTime=60
45
46	# The time interval at which the Queue's should be monitored
47	Queue.MonitorInterval=15
48	# The upper limit for a Queue
49	Queue.SizeLimit=1000
50	# The removal algorithm
51	Queue.RemoveAlgorithm=FIRST
52
53
54	############################################################
55	#### FilterManager configuration
56	############################################################
57
58	# The default port to listen for new host connections
59	FilterManager.listenPort=4567
60
61	# Access control list
62	FilterManager.ACL=DEFAULT:DENY;.ukc.ac.uk:ALLOW;129.12.:ALLOW
63
64
65
66	############################################################
67	#### Filter configuration
68	############################################################
69
70	# The default port for Filter's to listen on
71	Filter.UDPListenPort=4589
72	Filter.TCPListenPort=4589
73
74	# Plugin Information
75	Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
76	Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker;KeyChecker
77
78	# The name for the root filter
79	RootFilter.name=root
80
81	# The default parent filter (should almost always be the same as Filter.rootFilter)
82	Filter.parentFilter=root
83
84	# The input methods to activate
85	# (comment or set to 0 to disable)
86	Filter.ActivateTCPReader=1
87	Filter.ActivateUDPReader=1
88	Filter.ActivateCORBAReader=1
89
90	# Access control list for the TCP and UDP inputs
91	Filter.TCPACL=DEFAULT:DENY;.ukc.ac.uk:ALLOW;129.12.:ALLOW
92	Filter.UDPACL=DEFAULT:DENY;.ukc.ac.uk:ALLOW;129.12.:ALLOW
93
94	# Access control list for the SourceChecker plugin
95	# - packets not permitted by this ACL will be filtered
96	Filter.SourceCheckerPluginACL=DEFAULT:DENY;.ukc.ac.uk:ALLOW;129.12.:ALLOW
97
98	# Enforce host authentication?
99	# (comment or set to 0 to disable)
100	Filter.EnforceHostAuth=1
101
102
103
104	############################################################
105	#### Root filter interfaces configuration
106	############################################################
107
108	# Comment either of these (or delete them) and
109	# that interface won't be started
110	RootFilter.realtimeInterfaceName=realtimeclients
111	RootFilter.dbInterfaceName=database
112
113
114
115	############################################################
116	#### Client interface configuration
117	############################################################
118
119	# The port for the client interface to listen on
120	ClientInterface.listenPort=4510
121	# The name for the client interface
122	ClientInterface.name=realtimeclients
123
124	# Access Control List for TCP Clients
125	ClientInterface.TCPControlChannelACL=DEFAULT:DENY;.ukc.ac.uk:ALLOW;129.12.:ALLOW
126	ClientInterface.TCPDataChannelACL=DEFAULT:DENY;.ukc.ac.uk:ALLOW;129.12.:ALLOW
127
128
129
130	############################################################
131	#### Database interface configuration
132	############################################################
133
134	# The name for the Database interface
135	DBInterface.name=database
136
137
138
139	############################################################
140	#### Host Configuration
141	############################################################
142
143	# The default filter for a new host
144	Host.filter=computingFilter;
145
146	# The default update times for a new host
147	Host.UDPUpdateTime=10
148	Host.TCPUpdateTime=60
149
150	# The services checks to run on a host
151	Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
152
153
154
155	############################################################
156	#### Monitor Configuration
157	############################################################
158
159	## The monitors to run
160	Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
161	Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
162	Heartbeat;Queue;UserCount;WebFeeder;
163
164	## Default alert timeouts
165	# these can be override on a per-monitor basis
166	# timings of the alerts (in seconds)
167	Monitor.alertTimeout.NOTICE=60
168	Monitor.alertTimeout.WARNING=900
169	Monitor.alertTimeout.CAUTION=1800
170	Monitor.alertTimeout.CRITICAL=3600
171
172	## Threshold values
173	#
174	# note: if the UPPER threshold is broken,
175	# the alertTimeout values are halved.
176	# This is to escalate the alert quicker.
177	#
178
179	# CPU monitor threshold values
180	Monitor.CPU.threshold.LOWER=90
181	Monitor.CPU.threshold.UPPER=99
182
183
184	# Load monitor threshold values
185	Monitor.Load.threshold.LOWER=10.0
186	Monitor.Load.threshold.UPPER=20.0
187
188
189	# Process Count threshold values
190	Monitor.Process.threshold.LOWER=1000
191	Monitor.Process.threshold.UPPER=1500
192
193
194	# Memory monitor threshold values
195	Monitor.Memory.threshold.LOWER=80
196	Monitor.Memory.threshold.UPPER=90
197
198
199	# Swap monitor threshold values
200	Monitor.Swap.threshold.LOWER=80
201	Monitor.Swap.threshold.UPPER=90
202
203
204	# UserCount monitor threshold values
205	Monitor.UserCount.threshold.LOWER=100
206	Monitor.UserCount.threshold.UPPER=200
207
208
209	# Disk monitor threshold values
210	Monitor.Disk.threshold.LOWER=90
211	Monitor.Disk.threshold.UPPER=95
212	# Thresholds given are PERCENTAGE or VALUE
213	# where PERCENTAGE is a percentage of disk in use
214	# and VALUE is an absolute value of space free
215	Monitor.Disk.thresholdMeasure=PERCENTAGE
216
217
218	# Queue monitor threshold values
219	Monitor.Queue.threshold.LOWER=50
220	Monitor.Queue.threshold.UPPER=80
221	# Thresholds given are PERCENTAGE or VALUE
222	# where PERCENTAGE is a percentage of disk in use
223	# and VALUE is an absolute value of space free
224	Monitor.Queue.thresholdMeasure=PERCENTAGE
225
226
227	# Services monitor threshold values
228	#
229	# THE SERVICES MONITOR USES A HACK
230	# WHEREBY IT USES THE SERVICE STATUS
231	# AS THE THRESHOLD LEVEL. THIS SHOULD
232	# BE LOOKED AT!
233	#
234	# how many times we should be at the highest level before
235	# we go to a FINAL alert
236	Monitor.Services.reachFINALcount=5
237
238
239	# Heartbeat threshold values
240	# these are values in seconds from when the heartbeat
241	# was expected to arrive (ie. last + hearbeat period)
242	Monitor.Heartbeat.threshold.LOWER=180
243	Monitor.Heartbeat.threshold.UPPER=300
244	# this is how often we will run a "check" of heartbeats
245	Monitor.Heartbeat.checkPeriod=50
246	# how many times we should be at the highest level before
247	# we go to a FINAL alert
248	Monitor.Heartbeat.reachFINALcount=5
249	# list of hosts we expect to have at startup
250	# this ensures we notice hosts that aren't running, not
251	# just those that have gone down recently.
252	Monitor.Heartbeat.initialHosts=raptor.ukc.ac.uk;myrtle.ukc.ac.uk;kestrel.ukc.ac.uk
253
254
255
256	############################################################
257	#### Alerter Configuration
258	############################################################
259	# The following var's are understood by ALL alerters for messages
260	#
261	# %level% - the alert level (eg, WARNING)
262	# %threshold% - the threshold broken (eg, LOWER)
263	# %source% - the source of the alert (eg, raptor.ukc.ac.uk)
264	# %value% - the value reached (eg, 95)
265	# %thresholdValue% - the value of the threshold broken (eg, 90)
266	# %attributeName% - the attribute that has caused the alert (eg, CPU User)
267	# %timeTillNextAlert% - the time the next alert will be sent out
268	# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
269	# %timeOfFirstAlert% - the time the first alert was sent
270	#
271
272	# alerters to run
273	Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
274	Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
275
276
277	# EMail alerter configuration
278	Alerter.EMail.level = WARNING
279	Alerter.EMail.destList = dev@i-scream.org.uk
280	Alerter.EMail.sender = dev@i-scream.org.uk
281	Alerter.EMail.smtpServer = mercury.ukc.ac.uk
282	Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
283	Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
284
285
286	# IRC alerter configuration
287	Alerter.IRC.level = OK
288	Alerter.IRC.IRCServer = killigrew.ukc.ac.uk
289	Alerter.IRC.IRCPort = 6667
290	Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
291	Alerter.IRC.user = i-scream
292	Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
293	Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
294	Alerter.IRC.channel = #i-scream
295	Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
296	Alerter.IRC.reconnectDelay = 30
297	Alerter.IRC.startupNotice = i-scream alerting bot activated
298	Alerter.IRC.stopCommand = stop alerts
299	Alerter.IRC.startCommand = start alerts
300	Alerter.IRC.lastAlertCommand = last alert
301	Alerter.IRC.joinCommand = join
302	Alerter.IRC.nickChangeCommand = nick
303	Alerter.IRC.statCommand = statistics
304	Alerter.IRC.uptimeCommand = uptime
305	Alerter.IRC.timeSinceLastAlertCommand = time since last alert
306	Alerter.IRC.versionCommand = version
307	Alerter.IRC.helpCommand = help
308	Alerter.IRC.rejectMessage = sorry, I don't understand your request
309
310
311	# Logging alerter configuration
312	Alerter.Logging.level = WARNING
313	Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
314
315
316
317	############################################################
318	#### WebFeeder Configuration
319	############################################################
320
321	# Define these (one or both_ to turn on the WebFeeder's,
322	# comment it to turn them off
323	WebFeeder.latestActive = true
324	WebFeeder.alertActive = true
325
326	# Only pass on alerts past this level
327	Alerter.WebFeeder.level = OK
328
329	# Check period in seconds (for cleaning stale/old alerts)
330	WebFeeder.checkPeriod = 120
331
332	# Delete alerts older than this, in seconds.
333	# Files are only check every WebFeeder.checkPeriod seconds.
334	WebFeeder.alertDeleteOlderThan = 300
335
336	# Root Path
337	WebFeeder.rootPath = /usr/local/proj/co600_10/webroot
338
339	# Latest Data
340	WebFeeder.latestSubDir = latest
341	WebFeeder.latestFileName = latest_data
342
343	# Alert Data
344	WebFeeder.alertSubDir = alert
345	WebFeeder.alertFileName = alert_data
346
347
348	############################################################