build/etc/system.conf

# This is the default system configuration file
# used by all components of the i-scream system
#
# ALL configuration that uses the centralised
# configuration system has this file as its 
# root of configuration
#
# This is a working sample configuration, which
# aims to provide a working "out of the box"
# setup, aswell as a some example configuration.
#
# $Author: tdb $
# $Id: system.conf,v 1.69 2003/02/22 18:31:02 tdb Exp $
#
# http://www.i-scream.org.uk/
#

############################################################
#### Configuration Files & Groups
############################################################

# All components, such as hosts, will take their configuration
# as given in this file. Unless, that is, they have an extra
# configuration file specified here, or they're in a group
# that has a configuration file. If this is the case the extra
# configuration will override what is given in this file.

# We can define an extra configuration file for any component
# of the system. This is done by specifying the following:
#
# config.component=someconfigfile.conf
#
# Component names will be defined in the documentation for
# the component. An example is that a host component is
# known by the name "Host.hostname" or "Host.ip".
# It is also possible to use the wildcard "*" in a
# hostname or IP address.

# This defines that server.example.com has some extra
# configuration in the file 'server.conf'.
config.Host.server.example.com=exserver.conf

# All webservers are placed in a group named 'www'.
group.www=Host.www1.example.com;Host.www2.example.com
# Then we define some extra config for them.
config.www=webservers.conf

# Our workstations are in their own subnet.
group.workstations=Host.192.168.10.*;
# They can have their own config too.
config.workstations=workstations.conf

# Any hosts not specified by now have the default
# config as given in this file.

# Another component of the system is the mySQL
# database part of the server call the DBInterface.
# This has it's own config so the passwords for the
# mySQL database can be kept seperate.
#config.mySQL=mySQL.conf


############################################################
#### Misc system-wide configuration
############################################################

# The ConfigurationProxy caches configuration for various
# parts of the server. This setting defines how often, in
# seconds, the proxy will check if the data it contains
# is still valid.
ConfigurationProxy.updateTime=60

# The internal Queue's can be monitored. This specifies
# the interval, in seconds, at which their state should
# be monitored.
Queue.MonitorInterval=15
# The maximum size a Queue can be before items are
# dropped when new ones arrive.
Queue.SizeLimit=1000
# And which items we should drop when the queue is full
# and new items arrive. Choices are:
# RANDOM - drop a random item from the queue
# FIRST  - drop the first item from the queue
# LAST   - drop the last item from the queue
# DROP   - drop the new item from the queue
Queue.RemoveAlgorithm=FIRST

# The XMLCache caches data passing through the system.
# This setting specifies the time, in seconds, at which
# the caches contents will be rotated. In real terms
# this means the minimum age at which an XMLPacket can
# be before it is up for deletion from the cache.
XMLCache.cleanupPeriod=30


############################################################
#### FilterManager configuration
############################################################

# The FilterManager accepts connections from hosts
# upon startup. It provides them with configuration
# and details of which filter to talk to. This setting
# specifies which port (TCP) it listens on.
FilterManager.listenPort=4567

# An Access Control List for the FilterManager. One
# might consider something like this:
#
# FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
FilterManager.ACL=DEFAULT:ALLOW


############################################################
#### Filter configuration
############################################################

# A Filter accepts data from hosts on both a TCP port
# and a UDP port. They are specified here.
Filter.UDPListenPort=4589
Filter.TCPListenPort=4589

# Filters contain plugins for checking the data passing
# through them. This plugins do the job of "filtering".
# This setting specifies the java package they're
# contained in.
Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
# And the names of the plugins to be loaded.
Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker;KeyChecker

# The special filter known as the "Root Filter" needs
# a name within the system.
RootFilter.name=root

# Every Filter, except the root, needs a parent to
# send their data to. This is usually the root filter,
# although in more complex setups it might be another
# filter - giving a tree structure.
Filter.parentFilter=root

# A Filter can accept data through UDP, TCP, or from
# an upstream Filter (CORBA). These methods can be
# individually turned of on a filter. The default
# is to have them all on.
# (comment or set to 0 to disable)
Filter.ActivateTCPReader=1
Filter.ActivateUDPReader=1
Filter.ActivateCORBAReader=1

# We can also specify Access Control Lists for the
# TCP and UDP inputs of the Filters. One might want
# something restrictive like this:
#
# Filter.TCPACL=DEFAULT:DENY;*.example.com:ALLOW
# Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
Filter.TCPACL=DEFAULT:ALLOW
Filter.UDPACL=DEFAULT:ALLOW

# A Filter plugin called the SourceChecker verifies
# that packets come from permitted hosts. It is
# given an ACL to check the hosts against. A possible
# ACL might be:
#
# Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
Filter.SourceCheckerPluginACL=DEFAULT:ALLOW

# Enforce that hosts use the key based authentication.
# (comment or set to 0 to disable)
Filter.EnforceHostAuth=1

# Length of keys to use in authentication.
Filter.KeyLength=15


############################################################
#### Root filter interfaces configuration
############################################################

# The Root FIlter can send data to various upstream
# data processors. There are two of these at present
# in the server - the DBInterface and the ClientInterface.
# Their component names are given here as defined below.
# (the DBInterface is switched off - commented - by default)
#RootFilter.dbInterfaceName=database
RootFilter.realtimeInterfaceName=realtimeclients


############################################################
#### Client interface configuration
############################################################

# The client interface listens for connections from clients
# on a TCP port. It is specified here.
ClientInterface.listenPort=4510
# The component name for the Client Interface. This should
# match the name specified to the Root Filter above.
ClientInterface.name=realtimeclients

# The Client Interface has two channels, control and data.
# Each of these can have an ACL for allowing connections.
# As per previous examples in this configuration file they
# could be set restrictively, but we'll leave them open
# by default
ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW


############################################################
#### Database interface configuration
############################################################

# The name for the Database Interface. This should match
# the name given to the Root Filter.
DBInterface.name=database


############################################################
#### Host Configuration
############################################################

# A host can use any filter. We'll set the default filter
# for all hosts to be 'filter1'. This can be a list.
Host.filter=filter1;

# Hosts send data every UDPUpdateTime, in seconds, and then
# perform a heartbeat every TCPUpdateTime, in seconds.
Host.UDPUpdateTime=10
Host.TCPUpdateTime=60

# We can run service checks on a host. The java package
# which contains them is specified here.
Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins


############################################################
#### Monitor Configuration
############################################################

# Monitors allow data to be watched for possible problems.
# This setting specifies which java package they're in.
Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
# And which ones should be loaded.
Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
                Heartbeat;Queue;UserCount;WebFeeder;

# Alerts timeout after a given time in seconds and go up
# to the next level. These can be overridden for monitors
# on an individual basis.
Monitor.alertTimeout.NOTICE=60
Monitor.alertTimeout.WARNING=900
Monitor.alertTimeout.CAUTION=1800
Monitor.alertTimeout.CRITICAL=3600

## Threshold values
#
# Here we specify the threshold for each monitor. When
# a threshold is broken an alert is raised. If the
# UPPER threshold is broken the alertTimeout values
# given above are halved to make the alert escalate
# quicker.

# CPU monitor threshold values
Monitor.CPU.threshold.LOWER=90
Monitor.CPU.threshold.UPPER=95

# Load monitor threshold values
Monitor.Load.threshold.LOWER=10.0
Monitor.Load.threshold.UPPER=20.0

# Process Count threshold values
Monitor.Process.threshold.LOWER=500
Monitor.Process.threshold.UPPER=1000

# Memory monitor threshold values
Monitor.Memory.threshold.LOWER=80
Monitor.Memory.threshold.UPPER=90
# Whether to include 'cache' in the 'free' value
# (1 is true, anything else is false)
Monitor.Memory.useCacheAsFree=1

# Swap monitor threshold values
Monitor.Swap.threshold.LOWER=80
Monitor.Swap.threshold.UPPER=90

# UserCount monitor threshold values
Monitor.UserCount.threshold.LOWER=100
Monitor.UserCount.threshold.UPPER=200

# Disk monitor threshold values
Monitor.Disk.threshold.LOWER=90
Monitor.Disk.threshold.UPPER=95
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of disk in use
# and VALUE is an absolute value of space free
Monitor.Disk.thresholdMeasure=PERCENTAGE

# Queue monitor threshold values
Monitor.Queue.threshold.LOWER=50
Monitor.Queue.threshold.UPPER=80
# Thresholds given are PERCENTAGE or VALUE
# where PERCENTAGE is a percentage of the queue in use
# and VALUE is an absolute value of free space
Monitor.Queue.thresholdMeasure=PERCENTAGE

# Services monitor threshold values
# 
# THE SERVICES MONITOR USES A HACK
# WHEREBY IT USES THE SERVICE STATUS
# AS THE THRESHOLD LEVEL. THIS SHOULD
# BE LOOKED AT!
#
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Services.reachFINALcount=5

# Heartbeat threshold values
# these are values in seconds from when the heartbeat
# was *expected* to arrive (ie. last + hearbeat period)
Monitor.Heartbeat.threshold.LOWER=180
Monitor.Heartbeat.threshold.UPPER=300
# this is how often we will run a "check" of heartbeats
Monitor.Heartbeat.checkPeriod=50
# how many times we should be at the highest level before
# we go to a FINAL alert
Monitor.Heartbeat.reachFINALcount=5
# list of hosts we expect to have at startup
# this ensures we notice hosts that aren't running, not
# just those that have gone down recently.
#Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com


############################################################
#### Alerter Configuration
############################################################
# The following variables are understood by ALL alerters
# for messages. They will be substituted for their
# appropriate value.
#
# %level%               - the alert level (eg, WARNING)
# %threshold%           - the threshold broken (eg, LOWER)
# %source%              - the source of the alert (eg, raptor.ukc.ac.uk)
# %value%               - the value reached (eg, 95)
# %thresholdValue%      - the value of the threshold broken (eg, 90)
# %attributeName%       - the attribute that has caused the alert (eg, CPU User)
# %timeTillNextAlert%   - the time the next alert will be sent out
# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
# %timeOfFirstAlert%    - the time the first alert was sent
#

# The java package containing the alerters
Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
# And the names of the ones to activate
# You might want to turn them all on, but we only activate
# two basic ones by default.
# Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
Alerter.Plugins=WebFeeder;Logging;

# Configuration for the EMail alerter
# The level alerts have to bypass to be e-mailed out
Alerter.EMail.level = WARNING
# A list of people to send alerts to
Alerter.EMail.destList = me@example.com
# The sender of the e-mail
Alerter.EMail.sender = me@example.com
# The SMTP server to send alerts to
Alerter.EMail.smtpServer = smtp.example.com
# The subject line of the e-mail
Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
# The message in the e-mail
Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.

# Configuration for the IRC alerter
# The level alerts have to bypass to be sent
Alerter.IRC.level = OK
# The IRC server name
Alerter.IRC.IRCServer = irc.example.com
# and it's port
Alerter.IRC.IRCPort = 6667
# A list of nicks to try and be
Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
# Username to be
Alerter.IRC.user = i-scream
# Responses to CTCP prods
Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
# Channel to join
Alerter.IRC.channel = #i-scream
# Message to use when sending an alert
Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
# How long to wait before reconnecting
Alerter.IRC.reconnectDelay = 30
# Notice to send when starting up
Alerter.IRC.startupNotice = i-scream alerting bot activated 
# Commands the bot will recognise
Alerter.IRC.stopCommand = stop alerts
Alerter.IRC.startCommand = start alerts
Alerter.IRC.lastAlertCommand = last alert
Alerter.IRC.joinCommand = join
Alerter.IRC.nickChangeCommand = nick
Alerter.IRC.statCommand = statistics
Alerter.IRC.uptimeCommand = uptime
Alerter.IRC.timeSinceLastAlertCommand = time since last alert
Alerter.IRC.versionCommand = version
Alerter.IRC.helpCommand = help
# Message to send when the bot is addressed and
# doesn't understand the command
Alerter.IRC.rejectMessage = sorry, I don't understand your request

# Configuration for the Logging Alerter
# This alerter writes alerts to the i-scream logfile.
# The level alerts have to bypass to be logged
Alerter.Logging.level = WARNING
# The message to use when logging the alert
Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%


############################################################
#### WebFeeder Configuration
############################################################

# The WebFeeder drops alerts and latest data in to a
# directory for the web interface to use. It is essentially
# the link between the web interface and the server.

# Set these to something to tell the WebFeeder to drop
# latest data, alerts, or both. Comment themt o disable.
WebFeeder.latestActive = true
WebFeeder.alertActive = true

# We can make the WebFeeder only drop alerts that go
# past a certain level. The default is "OK", which makes
# all alerts get passed on.
Alerter.WebFeeder.level = OK

# The WebFeeder cleans out old and stale alerts when it
# performs a check. This setting is the period, in seconds,
# at which a check happens.
WebFeeder.checkPeriod = 120

# Delete alerts older than this, in seconds.
WebFeeder.alertDeleteOlderThan = 300

# Data will be dropped to a subdirectory (specified
# below) of this directory.
WebFeeder.rootPath = /web/i-scream

# SubDir is the directory below rootPath which latest
# data will be placed in. Below that a directory will
# be created with the machine name, and a file named
# FileName (specified here) will be created containg
# the data.
WebFeeder.latestSubDir = latest
WebFeeder.latestFileName = latest_data

# As above, but for the alerts.
WebFeeder.alertSubDir = alert
WebFeeder.alertFileName = alert_data


############################################################
Revision:	1.70
Committed:	Sun Feb 23 12:45:21 2003 UTC (21 years, 6 months ago) by tdb
Branch:	MAIN
Changes since 1.69:	+216 -116 lines
Log Message:	Attempted to turn the configuration in to something more self explanatory, and hopefully more useful to a new user. Somewhat better than the older configuration which still waffles on about raptor, rocks, and the library!
#	Content
1	# This is the default system configuration file
2	# used by all components of the i-scream system
3	#
4	# ALL configuration that uses the centralised
5	# configuration system has this file as its
6	# root of configuration
7	#
8	# This is a working sample configuration, which
9	# aims to provide a working "out of the box"
10	# setup, aswell as a some example configuration.
11	#
12	# $Author: tdb $
13	# $Id: system.conf,v 1.69 2003/02/22 18:31:02 tdb Exp $
14	#
15	# http://www.i-scream.org.uk/
16	#
17
18	############################################################
19	#### Configuration Files & Groups
20	############################################################
21
22	# All components, such as hosts, will take their configuration
23	# as given in this file. Unless, that is, they have an extra
24	# configuration file specified here, or they're in a group
25	# that has a configuration file. If this is the case the extra
26	# configuration will override what is given in this file.
27
28	# We can define an extra configuration file for any component
29	# of the system. This is done by specifying the following:
30	#
31	# config.component=someconfigfile.conf
32	#
33	# Component names will be defined in the documentation for
34	# the component. An example is that a host component is
35	# known by the name "Host.hostname" or "Host.ip".
36	# It is also possible to use the wildcard "*" in a
37	# hostname or IP address.
38
39	# This defines that server.example.com has some extra
40	# configuration in the file 'server.conf'.
41	config.Host.server.example.com=exserver.conf
42
43	# All webservers are placed in a group named 'www'.
44	group.www=Host.www1.example.com;Host.www2.example.com
45	# Then we define some extra config for them.
46	config.www=webservers.conf
47
48	# Our workstations are in their own subnet.
49	group.workstations=Host.192.168.10.*;
50	# They can have their own config too.
51	config.workstations=workstations.conf
52
53	# Any hosts not specified by now have the default
54	# config as given in this file.
55
56	# Another component of the system is the mySQL
57	# database part of the server call the DBInterface.
58	# This has it's own config so the passwords for the
59	# mySQL database can be kept seperate.
60	#config.mySQL=mySQL.conf
61
62
63	############################################################
64	#### Misc system-wide configuration
65	############################################################
66
67	# The ConfigurationProxy caches configuration for various
68	# parts of the server. This setting defines how often, in
69	# seconds, the proxy will check if the data it contains
70	# is still valid.
71	ConfigurationProxy.updateTime=60
72
73	# The internal Queue's can be monitored. This specifies
74	# the interval, in seconds, at which their state should
75	# be monitored.
76	Queue.MonitorInterval=15
77	# The maximum size a Queue can be before items are
78	# dropped when new ones arrive.
79	Queue.SizeLimit=1000
80	# And which items we should drop when the queue is full
81	# and new items arrive. Choices are:
82	# RANDOM - drop a random item from the queue
83	# FIRST - drop the first item from the queue
84	# LAST - drop the last item from the queue
85	# DROP - drop the new item from the queue
86	Queue.RemoveAlgorithm=FIRST
87
88	# The XMLCache caches data passing through the system.
89	# This setting specifies the time, in seconds, at which
90	# the caches contents will be rotated. In real terms
91	# this means the minimum age at which an XMLPacket can
92	# be before it is up for deletion from the cache.
93	XMLCache.cleanupPeriod=30
94
95
96	############################################################
97	#### FilterManager configuration
98	############################################################
99
100	# The FilterManager accepts connections from hosts
101	# upon startup. It provides them with configuration
102	# and details of which filter to talk to. This setting
103	# specifies which port (TCP) it listens on.
104	FilterManager.listenPort=4567
105
106	# An Access Control List for the FilterManager. One
107	# might consider something like this:
108	#
109	# FilterManager.ACL=DEFAULT:DENY;*.example.com:ALLOW
110	FilterManager.ACL=DEFAULT:ALLOW
111
112
113	############################################################
114	#### Filter configuration
115	############################################################
116
117	# A Filter accepts data from hosts on both a TCP port
118	# and a UDP port. They are specified here.
119	Filter.UDPListenPort=4589
120	Filter.TCPListenPort=4589
121
122	# Filters contain plugins for checking the data passing
123	# through them. This plugins do the job of "filtering".
124	# This setting specifies the java package they're
125	# contained in.
126	Filter.PluginsPackage=uk.org.iscream.cms.server.filter.plugins
127	# And the names of the plugins to be loaded.
128	Filter.Plugins=TypeChecker;EnforceEssentialData;SourceChecker;KeyChecker
129
130	# The special filter known as the "Root Filter" needs
131	# a name within the system.
132	RootFilter.name=root
133
134	# Every Filter, except the root, needs a parent to
135	# send their data to. This is usually the root filter,
136	# although in more complex setups it might be another
137	# filter - giving a tree structure.
138	Filter.parentFilter=root
139
140	# A Filter can accept data through UDP, TCP, or from
141	# an upstream Filter (CORBA). These methods can be
142	# individually turned of on a filter. The default
143	# is to have them all on.
144	# (comment or set to 0 to disable)
145	Filter.ActivateTCPReader=1
146	Filter.ActivateUDPReader=1
147	Filter.ActivateCORBAReader=1
148
149	# We can also specify Access Control Lists for the
150	# TCP and UDP inputs of the Filters. One might want
151	# something restrictive like this:
152	#
153	# Filter.TCPACL=DEFAULT:DENY;*.example.com:ALLOW
154	# Filter.UDPACL=DEFAULT:DENY;*.example.com:ALLOW
155	Filter.TCPACL=DEFAULT:ALLOW
156	Filter.UDPACL=DEFAULT:ALLOW
157
158	# A Filter plugin called the SourceChecker verifies
159	# that packets come from permitted hosts. It is
160	# given an ACL to check the hosts against. A possible
161	# ACL might be:
162	#
163	# Filter.SourceCheckerPluginACL=DEFAULT:DENY;*.example.com:ALLOW
164	Filter.SourceCheckerPluginACL=DEFAULT:ALLOW
165
166	# Enforce that hosts use the key based authentication.
167	# (comment or set to 0 to disable)
168	Filter.EnforceHostAuth=1
169
170	# Length of keys to use in authentication.
171	Filter.KeyLength=15
172
173
174	############################################################
175	#### Root filter interfaces configuration
176	############################################################
177
178	# The Root FIlter can send data to various upstream
179	# data processors. There are two of these at present
180	# in the server - the DBInterface and the ClientInterface.
181	# Their component names are given here as defined below.
182	# (the DBInterface is switched off - commented - by default)
183	#RootFilter.dbInterfaceName=database
184	RootFilter.realtimeInterfaceName=realtimeclients
185
186
187	############################################################
188	#### Client interface configuration
189	############################################################
190
191	# The client interface listens for connections from clients
192	# on a TCP port. It is specified here.
193	ClientInterface.listenPort=4510
194	# The component name for the Client Interface. This should
195	# match the name specified to the Root Filter above.
196	ClientInterface.name=realtimeclients
197
198	# The Client Interface has two channels, control and data.
199	# Each of these can have an ACL for allowing connections.
200	# As per previous examples in this configuration file they
201	# could be set restrictively, but we'll leave them open
202	# by default
203	ClientInterface.TCPControlChannelACL=DEFAULT:ALLOW
204	ClientInterface.TCPDataChannelACL=DEFAULT:ALLOW
205
206
207	############################################################
208	#### Database interface configuration
209	############################################################
210
211	# The name for the Database Interface. This should match
212	# the name given to the Root Filter.
213	DBInterface.name=database
214
215
216	############################################################
217	#### Host Configuration
218	############################################################
219
220	# A host can use any filter. We'll set the default filter
221	# for all hosts to be 'filter1'. This can be a list.
222	Host.filter=filter1;
223
224	# Hosts send data every UDPUpdateTime, in seconds, and then
225	# perform a heartbeat every TCPUpdateTime, in seconds.
226	Host.UDPUpdateTime=10
227	Host.TCPUpdateTime=60
228
229	# We can run service checks on a host. The java package
230	# which contains them is specified here.
231	Host.serviceChecksPackage=uk.org.iscream.cms.server.filter.plugins
232
233
234	############################################################
235	#### Monitor Configuration
236	############################################################
237
238	# Monitors allow data to be watched for possible problems.
239	# This setting specifies which java package they're in.
240	Monitor.PluginsPackage=uk.org.iscream.cms.server.client.monitors
241	# And which ones should be loaded.
242	Monitor.Plugins=CPU;Load;Process;Disk;Memory;Swap;Services;\
243	Heartbeat;Queue;UserCount;WebFeeder;
244
245	# Alerts timeout after a given time in seconds and go up
246	# to the next level. These can be overridden for monitors
247	# on an individual basis.
248	Monitor.alertTimeout.NOTICE=60
249	Monitor.alertTimeout.WARNING=900
250	Monitor.alertTimeout.CAUTION=1800
251	Monitor.alertTimeout.CRITICAL=3600
252
253	## Threshold values
254	#
255	# Here we specify the threshold for each monitor. When
256	# a threshold is broken an alert is raised. If the
257	# UPPER threshold is broken the alertTimeout values
258	# given above are halved to make the alert escalate
259	# quicker.
260
261	# CPU monitor threshold values
262	Monitor.CPU.threshold.LOWER=90
263	Monitor.CPU.threshold.UPPER=95
264
265	# Load monitor threshold values
266	Monitor.Load.threshold.LOWER=10.0
267	Monitor.Load.threshold.UPPER=20.0
268
269	# Process Count threshold values
270	Monitor.Process.threshold.LOWER=500
271	Monitor.Process.threshold.UPPER=1000
272
273	# Memory monitor threshold values
274	Monitor.Memory.threshold.LOWER=80
275	Monitor.Memory.threshold.UPPER=90
276	# Whether to include 'cache' in the 'free' value
277	# (1 is true, anything else is false)
278	Monitor.Memory.useCacheAsFree=1
279
280	# Swap monitor threshold values
281	Monitor.Swap.threshold.LOWER=80
282	Monitor.Swap.threshold.UPPER=90
283
284	# UserCount monitor threshold values
285	Monitor.UserCount.threshold.LOWER=100
286	Monitor.UserCount.threshold.UPPER=200
287
288	# Disk monitor threshold values
289	Monitor.Disk.threshold.LOWER=90
290	Monitor.Disk.threshold.UPPER=95
291	# Thresholds given are PERCENTAGE or VALUE
292	# where PERCENTAGE is a percentage of disk in use
293	# and VALUE is an absolute value of space free
294	Monitor.Disk.thresholdMeasure=PERCENTAGE
295
296	# Queue monitor threshold values
297	Monitor.Queue.threshold.LOWER=50
298	Monitor.Queue.threshold.UPPER=80
299	# Thresholds given are PERCENTAGE or VALUE
300	# where PERCENTAGE is a percentage of the queue in use
301	# and VALUE is an absolute value of free space
302	Monitor.Queue.thresholdMeasure=PERCENTAGE
303
304	# Services monitor threshold values
305	#
306	# THE SERVICES MONITOR USES A HACK
307	# WHEREBY IT USES THE SERVICE STATUS
308	# AS THE THRESHOLD LEVEL. THIS SHOULD
309	# BE LOOKED AT!
310	#
311	# how many times we should be at the highest level before
312	# we go to a FINAL alert
313	Monitor.Services.reachFINALcount=5
314
315	# Heartbeat threshold values
316	# these are values in seconds from when the heartbeat
317	# was expected to arrive (ie. last + hearbeat period)
318	Monitor.Heartbeat.threshold.LOWER=180
319	Monitor.Heartbeat.threshold.UPPER=300
320	# this is how often we will run a "check" of heartbeats
321	Monitor.Heartbeat.checkPeriod=50
322	# how many times we should be at the highest level before
323	# we go to a FINAL alert
324	Monitor.Heartbeat.reachFINALcount=5
325	# list of hosts we expect to have at startup
326	# this ensures we notice hosts that aren't running, not
327	# just those that have gone down recently.
328	#Monitor.Heartbeat.initialHosts=importantserver.example.com;myserver.example.com
329
330
331	############################################################
332	#### Alerter Configuration
333	############################################################
334	# The following variables are understood by ALL alerters
335	# for messages. They will be substituted for their
336	# appropriate value.
337	#
338	# %level% - the alert level (eg, WARNING)
339	# %threshold% - the threshold broken (eg, LOWER)
340	# %source% - the source of the alert (eg, raptor.ukc.ac.uk)
341	# %value% - the value reached (eg, 95)
342	# %thresholdValue% - the value of the threshold broken (eg, 90)
343	# %attributeName% - the attribute that has caused the alert (eg, CPU User)
344	# %timeTillNextAlert% - the time the next alert will be sent out
345	# %timeSinceFirstAlert% - the time elapsed since the first alert for this problem
346	# %timeOfFirstAlert% - the time the first alert was sent
347	#
348
349	# The java package containing the alerters
350	Alerter.PluginsPackage=uk.org.iscream.cms.server.client.alerters
351	# And the names of the ones to activate
352	# You might want to turn them all on, but we only activate
353	# two basic ones by default.
354	# Alerter.Plugins=EMail;IRC;WebFeeder;Logging;
355	Alerter.Plugins=WebFeeder;Logging;
356
357	# Configuration for the EMail alerter
358	# The level alerts have to bypass to be e-mailed out
359	Alerter.EMail.level = WARNING
360	# A list of people to send alerts to
361	Alerter.EMail.destList = me@example.com
362	# The sender of the e-mail
363	Alerter.EMail.sender = me@example.com
364	# The SMTP server to send alerts to
365	Alerter.EMail.smtpServer = smtp.example.com
366	# The subject line of the e-mail
367	Alerter.EMail.subject = i-scream alert: %level% alert on %source% for %attributeName%
368	# The message in the e-mail
369	Alerter.EMail.message = The i-scream distributed central monitoring system has\nraised a %level% alert for the host %source%.\n\nThe value for %attributeName% of %value% has exceeded the\n%threshold% threshold value of %thresholdValue%.\n\nThis alert was originally raised at %timeOfFirstAlert%,\nwhich was %timeSinceFirstAlert% ago.\n\nThe next alert (should one occur) will be sent in %timeTillNextAlert%.
370
371	# Configuration for the IRC alerter
372	# The level alerts have to bypass to be sent
373	Alerter.IRC.level = OK
374	# The IRC server name
375	Alerter.IRC.IRCServer = irc.example.com
376	# and it's port
377	Alerter.IRC.IRCPort = 6667
378	# A list of nicks to try and be
379	Alerter.IRC.nickList = iscreamBot;_iscreamBot;i-screamBot
380	# Username to be
381	Alerter.IRC.user = i-scream
382	# Responses to CTCP prods
383	Alerter.IRC.comment = i-scream alerting bot (based on PircBot)
384	Alerter.IRC.finger = i-scream alerting bot (based on PircBot)
385	# Channel to join
386	Alerter.IRC.channel = #i-scream
387	# Message to use when sending an alert
388	Alerter.IRC.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value% - time till next alert (should one occur), %timeTillNextAlert%
389	# How long to wait before reconnecting
390	Alerter.IRC.reconnectDelay = 30
391	# Notice to send when starting up
392	Alerter.IRC.startupNotice = i-scream alerting bot activated
393	# Commands the bot will recognise
394	Alerter.IRC.stopCommand = stop alerts
395	Alerter.IRC.startCommand = start alerts
396	Alerter.IRC.lastAlertCommand = last alert
397	Alerter.IRC.joinCommand = join
398	Alerter.IRC.nickChangeCommand = nick
399	Alerter.IRC.statCommand = statistics
400	Alerter.IRC.uptimeCommand = uptime
401	Alerter.IRC.timeSinceLastAlertCommand = time since last alert
402	Alerter.IRC.versionCommand = version
403	Alerter.IRC.helpCommand = help
404	# Message to send when the bot is addressed and
405	# doesn't understand the command
406	Alerter.IRC.rejectMessage = sorry, I don't understand your request
407
408	# Configuration for the Logging Alerter
409	# This alerter writes alerts to the i-scream logfile.
410	# The level alerts have to bypass to be logged
411	Alerter.Logging.level = WARNING
412	# The message to use when logging the alert
413	Alerter.Logging.message = %level%: %attributeName% on %source% has passed %threshold%(%thresholdValue%) threshold with %value%
414
415
416	############################################################
417	#### WebFeeder Configuration
418	############################################################
419
420	# The WebFeeder drops alerts and latest data in to a
421	# directory for the web interface to use. It is essentially
422	# the link between the web interface and the server.
423
424	# Set these to something to tell the WebFeeder to drop
425	# latest data, alerts, or both. Comment themt o disable.
426	WebFeeder.latestActive = true
427	WebFeeder.alertActive = true
428
429	# We can make the WebFeeder only drop alerts that go
430	# past a certain level. The default is "OK", which makes
431	# all alerts get passed on.
432	Alerter.WebFeeder.level = OK
433
434	# The WebFeeder cleans out old and stale alerts when it
435	# performs a check. This setting is the period, in seconds,
436	# at which a check happens.
437	WebFeeder.checkPeriod = 120
438
439	# Delete alerts older than this, in seconds.
440	WebFeeder.alertDeleteOlderThan = 300
441
442	# Data will be dropped to a subdirectory (specified
443	# below) of this directory.
444	WebFeeder.rootPath = /web/i-scream
445
446	# SubDir is the directory below rootPath which latest
447	# data will be placed in. Below that a directory will
448	# be created with the machine name, and a file named
449	# FileName (specified here) will be created containg
450	# the data.
451	WebFeeder.latestSubDir = latest
452	WebFeeder.latestFileName = latest_data
453
454	# As above, but for the alerts.
455	WebFeeder.alertSubDir = alert
456	WebFeeder.alertFileName = alert_data
457
458
459	############################################################