i-scream libstatgrab homepage
- - - -News
- --To get notifications of new libstatgrab releases why not subscribe -to our project over on -freshmeat? -
- -Sunday 21 March 2004
--pystatgrab, a new package containing a set of Python bindings, -has been released. Check out it's project -page. -
- -Wednesday 10 March 2004
-
-Version 0.9 of libstatgrab has been released.
-Download it
-here.
-
-This release brings new features and new platforms. We've added -information about network interfaces (duplex, speed, etc) along -with further statistics such as i/o packets, i/o errors, and -collisions. Support has also been added for OpenBSD and DragonFly -BSD. Finally some work has been done to reduce the platforms on -which libstatgrab needs elevated privileges. See the NEWS file for -more information. -
- -Wednesday 11 February 2004
-
-Version 0.8.2 of libstatgrab has been released.
-Download it
-here.
-
-The main focus of this release is adding support for Solaris 6. -We've also added Python bindings so you can use libstatgrab directly -from Python (see the extras directory). Finally, we've tidied up a -few bits of the code. -
- -Wednesday 21 January 2004
-
-Version 0.8.1 of libstatgrab has been released.
-Download it
-here.
-
-This release primarily fixes bugs. On Linux a file descriptor leak was -fixed. On Solaris some significant speed increases were made to the -disk mapping code, along with some bug fixes for Solaris 7 platforms. -Also, the library part of libstatgrab (but not the tools) is now -released under the LGPL instead of the GPL. -
- -Tuesday 6 January 2004
-
-Version 0.8 of libstatgrab has been released.
-Download it
-here.
-
-This release brings support for Linux 2.6 and partial support for Cygwin. -On Solaris libstatgrab now returns disk names using cNtNdNsN names rather -than the older sdN names. There are also a bunch of fixes and optimisations -in various places. Finally, a new function has been added to make it -quicker to drop any elevated privileges libstatgrab may require on some -operating systems. -
- -Wednesday 22 October 2003
-
-Version 0.7 of libstatgrab has been released.
-Download it
-here.
-
-The most significant change in this release is support for NetBSD -1.6.x. Parts of the FreeBSD code have been optimised, and an initialise -function has been added to allow programs to drop any extra privileges -libstatgrab needs. The list of known file systems has been increased, -and libstatgrab has been tested on even more platforms. Finally, -saidar has been tweaked to work even if it can't get all the -statistics. -
- -Saturday 18 October 2003
-
-Version 0.6.1 of libstatgrab has been released.
-Download it
-here.
-
-This release brings support for FreeBSD 5 on sparc 64, and some -bugfixes in FreeBSD memory statistics. Also, some fixes to saidar, -and statgrab. -
- -Friday 10 October 2003
-
-Version 0.6 of libstatgrab has been released.
-You can download it from our mirror site
-here.
-
-This release includes some exciting new tools, support for FreeBSD -5.1, and documentation in manpages. Plus some major bugfixes and -packaging enhancements. -
- -Tuesday 09 September 2003
-
-We're pleased to announce a new release of libstatgrab.
-You can download version 0.5.1 from
-here.
-
Monday 25 August 2003
-
-We're pleased to announce a new release of libstatgrab.
-You can download version 0.5 from
-here.
-
-This release provides both documentation and examples, which -we hope will make the package more useable. Stay tuned for the -next release with some useful tools. -
- -What is libstatgrab?
- --libstatgrab is a library that provides cross platform access to -statistics about the system on which it's run. It's written in C and -presents a selection of useful interfaces which can be used to access -key system statistics. The current list of statistics includes CPU -usage, memory utilisation, disk usage, process counts, network -traffic, disk I/O, and more. -
- --The current list of platforms is Solaris 2.x, Linux 2.2/2.4/2.6, -FreeBSD 4.x/5.x, NetBSD 1.6.x, OpenBSD 3.x, DragonFly BSD 1.0, and -Cygwin. The aim is to extend this to include as many operating -systems as possible. -
- --The package also includes a couple of useful tools. The first, -saidar, provides a curses-based interface to -viewing the current state of the system. The second, statgrab, gives a -sysctl-style interface to the statistics gathered by libstatgrab. This -extends the use of libstatgrab to people writing scripts or anything -else that can't easily make C function calls. Included with statgrab is -a script to generate an MRTG -configuration file to use statgrab. -
- -Downloading
- --The latest version of libstatgrab can be downloaded from our -primary download -mirror. -All downloads are pgp signed using our PGP Key. -
- --For installation instructions see the README and INSTALL files -contained within the archive. If you're using -FreeBSD you can make use of the -devel/libstatgrab -port to install libstatgrab for you. -
- -Documentation
- --The only online documentation we have at the moment is the manual -pages converted in to HTML format. It's probably best to start with -the overview manual page: -
- --
-
- statgrab(3) -
-Then we have the manual pages for each function: -
- --
-
- cpu_percent_usage(3) -
- get_diskio_stats(3) -
- get_general_stats(3) -
- get_load_stats(3) -
- get_memory_stats(3) -
- get_network_iface_stats(3) -
- get_network_stats(3) -
- get_page_stats(3) -
- get_process_stats(3) -
- get_user_stats(3) -
Screenshot
- --Here's what saidar looks like when it's running: -
-
-
-
+ i-scream libstatgrab homepage +
+ ++ News +
++ To get notifications of new libstatgrab releases why not + subscribe to our project over on + freshmeat? +
++ Sunday 21 March 2004 +
++ pystatgrab, a new package containing a set of Python + bindings, has been released. Check out it's + project page. +
++ Wednesday 10 March 2004 +
+
+ Version 0.9 of libstatgrab has been released.
+ Download it
+
+ here.
+
+ This release brings new features and new platforms. We've + added information about network interfaces (duplex, speed, + etc) along with further statistics such as i/o packets, i/o + errors, and collisions. Support has also been added for + OpenBSD and DragonFly BSD. Finally some work has been done + to reduce the platforms on which libstatgrab needs elevated + privileges. See the NEWS file for more information. +
++ Wednesday 11 February 2004 +
+
+ Version 0.8.2 of libstatgrab has been released.
+ Download it
+
+ here.
+
+ The main focus of this release is adding support for + Solaris 6. We've also added Python bindings so you can use + libstatgrab directly from Python (see the extras + directory). Finally, we've tidied up a few bits of the + code. +
++ Wednesday 21 January 2004 +
+
+ Version 0.8.1 of libstatgrab has been released.
+ Download it
+
+ here.
+
+ This release primarily fixes bugs. On Linux a file + descriptor leak was fixed. On Solaris some significant + speed increases were made to the disk mapping code, along + with some bug fixes for Solaris 7 platforms. Also, the + library part of libstatgrab (but not the tools) is now + released under the LGPL instead of the GPL. +
++ Tuesday 6 January 2004 +
+
+ Version 0.8 of libstatgrab has been released.
+ Download it
+
+ here.
+
+ This release brings support for Linux 2.6 and partial + support for Cygwin. On Solaris libstatgrab now returns disk + names using cNtNdNsN names rather than the older sdN names. + There are also a bunch of fixes and optimisations in + various places. Finally, a new function has been added to + make it quicker to drop any elevated privileges libstatgrab + may require on some operating systems. +
++ Wednesday 22 October 2003 +
+
+ Version 0.7 of libstatgrab has been released.
+ Download it
+
+ here.
+
+ The most significant change in this release is support for + NetBSD 1.6.x. Parts of the FreeBSD code have been + optimised, and an initialise function has been added to + allow programs to drop any extra privileges libstatgrab + needs. The list of known file systems has been increased, + and libstatgrab has been tested on even more platforms. + Finally, saidar has been tweaked to work even if it can't + get all the statistics. +
++ Saturday 18 October 2003 +
+
+ Version 0.6.1 of libstatgrab has been released.
+ Download it
+
+ here.
+
+ This release brings support for FreeBSD 5 on sparc 64, and + some bugfixes in FreeBSD memory statistics. Also, some + fixes to saidar, and statgrab. +
++ Friday 10 October 2003 +
+
+ Version 0.6 of libstatgrab has been released.
+ You can download it from our mirror site
+
+ here.
+
+ This release includes some exciting new tools, support for + FreeBSD 5.1, and documentation in manpages. Plus some major + bugfixes and packaging enhancements. +
++ Tuesday 09 September 2003 +
+
+ We're pleased to announce a new release of
+ libstatgrab.
+ You can download version 0.5.1 from
+
+ here.
+
+ Monday 25 August 2003 +
+
+ We're pleased to announce a new release of
+ libstatgrab.
+ You can download version 0.5 from
+
+ here.
+
+ This release provides both documentation and examples, + which we hope will make the package more useable. Stay + tuned for the next release with some useful tools. +
++ What is libstatgrab? +
++ libstatgrab is a library that provides cross platform + access to statistics about the system on which it's run. + It's written in C and presents a selection of useful + interfaces which can be used to access key system + statistics. The current list of statistics includes CPU + usage, memory utilisation, disk usage, process counts, + network traffic, disk I/O, and more. +
++ The current list of platforms is Solaris 2.x, Linux + 2.2/2.4/2.6, FreeBSD 4.x/5.x, NetBSD 1.6.x, OpenBSD 3.x, + DragonFly BSD 1.0, and Cygwin. The aim is to extend this to + include as many operating systems as possible. +
++ The package also includes a couple of useful tools. The + first, saidar, provides a + curses-based interface to viewing the current state of the + system. The second, statgrab, gives a sysctl-style + interface to the statistics gathered by libstatgrab. This + extends the use of libstatgrab to people writing scripts or + anything else that can't easily make C function calls. + Included with statgrab is a script to generate an + MRTG configuration file + to use statgrab. +
++ Downloading +
++ The latest version of libstatgrab can be downloaded from + our primary download + + mirror. All downloads are pgp signed using our + PGP Key. +
++ For installation instructions see the README and INSTALL + files contained within the archive. If you're using + FreeBSD you can make + use of the + + devel/libstatgrab port to install libstatgrab for you. +
++ Development +
+-
+
- + Commits this week + +
+ We develop libstatgrab using the CVS revision control system. + Using this link you can see what changes we've made this week. + For more information on our CVS setup see our + CVS page. +
++ Documentation +
++ The only online documentation we have at the moment is the + manual pages converted in to HTML format. It's probably + best to start with the overview manual page: +
+-
+
- + statgrab(3) + +
+ Then we have the manual pages for each function: +
+-
+
- + cpu_percent_usage(3) + +
- + get_diskio_stats(3) + +
- + get_general_stats(3) + +
- + get_load_stats(3) + +
- + get_memory_stats(3) + +
- + get_network_iface_stats(3) + +
- + get_network_stats(3) + +
- + get_page_stats(3) + +
- + get_process_stats(3) + +
- + get_user_stats(3) + +
+ Screenshot +
++ Here's what saidar looks like when it's running: +
+
+
+